BMR Watts Link Body Mount Rod Ends Adjustable Axle Clamps Red (1993-2002 F-Body) WL002R
Add the ultimate lateral differential location device to your Fourth Gen F-Body with the BMR Suspension Body-Mounted Watts Link Kit for 1993-2002 Chevrolet Camaros and Pontiac Firebirds. Factory panhard bars track in an unpredictable arc during rear axle travel, causing the rear end to shift side-to-side and upsetting chassis balance during hard cornering or high-speed transitions. This race-engineered Watts link completely eliminates lateral axle movement by keeping the differential perfectly centered under the vehicle throughout the suspension's entire range of motion, providing rock-solid stability and highly predictable handling characteristics.
Built to withstand extreme track environments, the main crossmember is manufactured from heavy-duty 1x2-inch (0.120-inch wall) rectangular steel tubing and robust 0.25-inch laser-cut steel plates. The system features a double-shear fabricated center pivot riding on a greasable Delrin center bushing for smooth, fluid operation. The heavy-duty axle mounts are engineered from 1x1.5-inch square tubing reinforced with 3/16-inch laser-cut steel gussets, connecting to the center pivot via uncompromising double-shear mounts that eliminate deflection. This premium kit features double-adjustable aluminum links equipped with heavy-duty, zinc-plated, X-series heat-treated chrome-moly rod ends that are self-lubricating and Teflon-lined to deliver bind-free articulation and crisp response, paired with custom 304 stainless steel spacers. With 6 roll-center height adjustment points across the center pivot, you can easily fine-tune your F-Body's rear roll center to optimize traction and handling balance for any street performance, drag racing, or road course setup. Finished in a high-gloss red powdercoat, this 100-percent bolt-on kit requires no welding or chassis modifications and works with stock or BMR rear sway bars. Note: Fits factory 10-bolt or 12-bolt rear ends; will not work on a 9-inch or Dana 60 rear end without modification. Installation takes approximately 3 to 4 hours.
Features
- Eliminates lateral rear axle movement completely to deliver precise, highly predictable handling
- Provides 6 roll-center adjustment positions to optimize rear weight transfer, traction, and cornering balance
- Constructed from heavy-duty 1x2-inch (0.120-inch wall) rectangular steel tubing and 0.25-inch laser-cut plates
- Axle mounts built from 1x1.5-inch square tubing with 3/16-inch gussets for maximum rigidity
- Uncompromising double-shear mount design eliminates flex and prevents single-shear distortion
- Double-adjustable aluminum links feature zinc-plated, X-series, heat-treated chrome-moly, Teflon-lined rod ends for bind-free articulation
- Heavy-duty double-shear center pivot assembly incorporates a greasable Delrin center bushing
- Engineered specifically to handle the extreme loads of street performance, drag racing, and road course use
- Compatible with factory rear sway bars as well as upgraded BMR sway bars
- Finished in a long-lasting, premium red powdercoat for superior rust and corrosion resistance
- Proudly designed, tested, and manufactured in the U.S.A.
- 100% bolt-on design installs in approximately 3 to 4 hours using standard garage tools
Fitment
- 1993 Chevrolet Camaro (with 10-Bolt / 12-Bolt Rear End)
- 1993 Pontiac Firebird / Trans Am (with 10-Bolt / 12-Bolt Rear End)
- 1994 Chevrolet Camaro (with 10-Bolt / 12-Bolt Rear End)
- 1994 Pontiac Firebird / Trans Am (with 10-Bolt / 12-Bolt Rear End)
- 1995 Chevrolet Camaro (with 10-Bolt / 12-Bolt Rear End)
- 1995 Pontiac Firebird / Trans Am (with 10-Bolt / 12-Bolt Rear End)
- 1996 Chevrolet Camaro (with 10-Bolt / 12-Bolt Rear End)
- 1996 Pontiac Firebird / Trans Am (with 10-Bolt / 12-Bolt Rear End)
- 1997 Chevrolet Camaro (with 10-Bolt / 12-Bolt Rear End)
- 1997 Pontiac Firebird / Trans Am (with 10-Bolt / 12-Bolt Rear End)
- 1998 Chevrolet Camaro (with 10-Bolt / 12-Bolt Rear End)
- 1998 Pontiac Firebird / Trans Am (with 10-Bolt / 12-Bolt Rear End)
- 1999 Chevrolet Camaro (with 10-Bolt / 12-Bolt Rear End)
- 1999 Pontiac Firebird / Trans Am (with 10-Bolt / 12-Bolt Rear End)
- 2000 Chevrolet Camaro (with 10-Bolt / 12-Bolt Rear End)
- 2000 Pontiac Firebird / Trans Am (with 10-Bolt / 12-Bolt Rear End)
- 2001 Chevrolet Camaro (with 10-Bolt / 12-Bolt Rear End)
- 2001 Pontiac Firebird / Trans Am (with 10-Bolt / 12-Bolt Rear End)
- 2002 Chevrolet Camaro (with 10-Bolt / 12-Bolt Rear End)
- 2002 Pontiac Firebird / Trans Am (with 10-Bolt / 12-Bolt Rear End)
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
