Whipple Gen 6 3.0L Supercharger Kit NFT (WK-3002-30-NFT) - 2018-2023 Dodge Challenger / Charger / Chrysler 300 5.7L HEMI
Upgrade your 2018-2023 Dodge Challenger, Charger, or Chrysler 300 5.7L HEMI with the Whipple Gen 6 3.0L Supercharger Kit. This twin-screw system delivers immediate boost response, strong mid-range acceleration, and a broad torque curve, producing up to 570 horsepower and 545 lb-ft of torque on 93-octane fuel under optimal conditions.
IMPORTANT NFT KIT NOTICE: The WK-3002-30-NFT includes Whipple calibration support only. The HP Tuners RTD flash tool and tuning credits are NOT included and must be purchased separately.
The kit combines Whipple's Gen 6 3.0L inverted twin-screw supercharger with an oversized 112mm front-entry inlet, patented dual-core intercooling, Hellcat high-flow injectors, billet fuel rails, and a fuel pump voltage booster. It also includes a high-flow intercooler pump, oversized heat exchanger, spring-loaded belt drive, and colder spark plugs.
Gen 6 3.0L Twin-Screw Supercharger
Whipple's Gen 6 3.0L inverted twin-screw supercharger features an oversized 112mm front-entry inlet designed to increase airflow capacity and support the power demands of the 5.7L HEMI engine.
The positive-displacement design provides immediate boost response and a strong, flat torque curve throughout the RPM range. Whipple's Gen 6 rotor and airflow technology incorporates engineering proven in Dodge factory Drag Pak racing applications.
With 93-octane fuel, the system is capable of producing up to 570 horsepower and 545 lb-ft of torque while maintaining the drivability expected from a complete street-oriented supercharger package.
Direct-Fit Air Inlet System
The WK-3002-30-NFT features a high-flow 112mm front-entry inlet assembly designed to supply the airflow required by the Gen 6 3.0L supercharger.
The system retains the factory throttle body using a supplied adapter and is engineered around the original airbox configuration with a high-flow replacement air filter. This arrangement provides increased airflow while maintaining factory-style fitment and a clean engine bay appearance.
Patented Dual-Core, Dual-Pass Intercooling
Whipple's patented dual-core, dual-pass air-to-water intercooler system uses large bar-and-plate intercooler cores to help control intake air temperatures under load.
An oversized heat exchanger and high-flow intercooler pump are included to support cooling capacity and temperature recovery during repeated acceleration.
The intercooling system is designed to reduce charge-air temperatures and maintain consistent, repeatable power during demanding driving conditions.
Upgraded Fuel System
The WK-3002-30-NFT includes billet fuel rails, Hellcat high-flow fuel injectors, and a fuel pump voltage booster to support the increased fuel requirements of the supercharged 5.7L HEMI engine.
Colder spark plugs are also included as part of the installation package.
Spring-Loaded Belt Drive
The system includes a spring-loaded supercharger belt-drive arrangement with an adjustable idler to maintain proper belt control and adjustment.
This configuration is designed to provide reliable operation while supporting the increased demands of the Gen 6 3.0L supercharger.
NFT Calibration Support and PCM Unlock
The WK-3002-30-NFT includes Whipple calibration support for compatible 2018-2023 Dodge Challenger, Charger, and Chrysler 300 5.7L HEMI applications.
Unlike the standard WK-3002-30 kit, this NFT configuration does NOT include an HP Tuners RTD flash tool or tuning credits. Compatible flashing equipment and the required tuning credits must be purchased separately.
All 2018-2023 applications require a PCM unlock before the Whipple calibration can be installed. These vehicles also require gateway access support through an HP Tuners Smart Access Cable.
The HP Tuners Smart Access Cable and PCM unlock code are not confirmed as included with this NFT configuration. Verify these items before installation and obtain them separately if required.
A compatible HP Tuners RTD device supports reading, clearing, flashing, and data logging once the necessary equipment and vehicle access requirements have been met.
Complete Bolt-On Installation
Whipple engineered the Gen 6 3.0L system as a bolt-on package requiring no internal engine modifications. OEM-style quick-connect fittings and plug-and-play wiring simplify installation while maintaining factory-style component integration.
The system is designed for daily drivability and long-term reliability, with a clean engine bay appearance when installed.
Whipple has developed twin-screw supercharging technology since 1987. The Gen 6 3.0L system is designed, manufactured, and assembled at Whipple's facility in Fresno, California, USA.
Features
- Whipple Gen 6 3.0L inverted twin-screw supercharger system
- Designed for 2018-2023 Dodge Challenger, Dodge Charger, and Chrysler 300 5.7L HEMI applications
- Produces up to 570 horsepower and 545 lb-ft of torque on 93-octane fuel
- Oversized 112mm front-entry inlet assembly for increased airflow capacity
- Immediate boost response and broad, flat torque delivery
- Drag Pak-proven rotor and airflow technology
- Direct-fit air inlet system
- Retains factory throttle body using supplied adapter
- Retains factory airbox configuration with a high-flow replacement air filter
- Patented dual-core, dual-pass air-to-water intercooler system
- Large bar-and-plate intercooler cores
- Oversized heat exchanger included
- High-flow intercooler pump included
- Designed to reduce charge-air temperatures and maintain consistent performance
- Billet fuel rails included
- Hellcat high-flow fuel injectors included
- Fuel pump voltage booster included
- Colder spark plugs included
- Spring-loaded supercharger belt-drive system
- Adjustable idler for belt control and adjustment
- Whipple calibration support included
- HP Tuners RTD flash tool and tuning credits NOT included
- Compatible flashing equipment and tuning credits required for calibration installation
- PCM unlock required before flashing the Whipple calibration
- 2018-2023 applications require gateway access support through an HP Tuners Smart Access Cable
- Smart Access Cable and PCM unlock code inclusion must be verified for this NFT configuration
- Compatible HP Tuners RTD equipment supports reading, clearing, flashing, and data logging
- Complete bolt-on installation with no internal engine modifications required
- OEM-style quick-connect fittings and plug-and-play wiring
- Factory-style component integration and clean engine bay appearance
- Designed for daily drivability and long-term reliability
- Designed, manufactured, and assembled in Fresno, California, USA
- CARB certified and 50-state legal under Executive Order D-231-145 for qualifying applications when installed as supplied
Fitment
- 2018 Dodge Challenger 5.7L HEMI V8
- 2019 Dodge Challenger 5.7L HEMI V8
- 2020 Dodge Challenger 5.7L HEMI V8
- 2021 Dodge Challenger 5.7L HEMI V8
- 2022 Dodge Challenger 5.7L HEMI V8
- 2023 Dodge Challenger 5.7L HEMI V8
- 2018 Dodge Charger 5.7L HEMI V8
- 2019 Dodge Charger 5.7L HEMI V8
- 2020 Dodge Charger 5.7L HEMI V8
- 2021 Dodge Charger 5.7L HEMI V8
- 2022 Dodge Charger 5.7L HEMI V8
- 2023 Dodge Charger 5.7L HEMI V8
- 2018 Chrysler 300 5.7L HEMI V8
- 2019 Chrysler 300 5.7L HEMI V8
- 2020 Chrysler 300 5.7L HEMI V8
- 2021 Chrysler 300 5.7L HEMI V8
- 2022 Chrysler 300 5.7L HEMI V8
- 2023 Chrysler 300 5.7L HEMI V8
Important Installation and Performance Notes
- NFT Kit: Whipple calibration support is included, but an HP Tuners RTD flash tool and tuning credits are NOT included and must be purchased separately.
- PCM Unlock Required: All 2018-2023 applications require a PCM unlock before the Whipple calibration can be installed.
- Gateway Access: An HP Tuners Smart Access Cable is required for the 2018 and newer vehicle calibration workflow. Cable and PCM unlock code inclusion are not confirmed for this NFT kit.
- Fuel System: Includes billet fuel rails, Hellcat high-flow injectors, and a fuel pump voltage booster.
- Air Intake: Retains the factory throttle body and airbox configuration using the supplied adapter and high-flow replacement filter.
- Installation: Bolt-on system with OEM-style quick-connect fittings and plug-and-play wiring. No internal engine modifications required.
- Emissions Compliance: Whipple identifies the system as CARB certified and 50-state legal under Executive Order D-231-145 for qualifying applications when installed as supplied.
- Performance Disclaimer: Advertised output of up to 570 horsepower and 545 lb-ft of torque is based on 93-octane fuel under optimal conditions. Actual results may vary depending on fuel quality, altitude, and testing procedures.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov

