null

Whipple Supercharger Kit W185RF 3.0L Gen 6 (2016 - 2020 Shelby GT350) WK-2621-30

Image is a representation of this item.
Actual item may vary.

Item#:
wk-2621-30
Price: $9,999.99
(No reviews yet) Write a Review

Whipple Gen 6 3.0L Supercharger Kit (WK-2621-30) - 2016-2020 Ford Shelby GT350 / GT350R 5.2L

Increase the performance of your 2016-2020 Ford Mustang Shelby GT350 or GT350R with the Whipple Gen 6 3.0L Supercharger Kit. Designed specifically for Ford's high-revving 5.2L Voodoo V8, this complete twin-screw supercharger system produces up to 875 horsepower and 660 lb-ft of torque on 93-octane fuel under optimal conditions.

The WK-2621-30 combines Whipple's Gen 6 W185AX 3.0L supercharger with a billet 132mm Roval throttle body, 123mm high-flow air intake, patented dual-core intercooling system, upgraded fuel components, and an HP Tuners MPVI4 flash tool with Whipple calibration support. The system delivers immediate boost response and a broad torque curve while retaining the drivability expected from the Shelby GT350 platform.

Gen 6 W185AX 3.0L Twin-Screw Supercharger

Whipple's front-entry Gen 6 W185AX 3.0L twin-screw supercharger is engineered to deliver increased airflow and efficient boost production throughout the GT350's RPM range.

With approximately 30% more displacement than a 2.3L roots-style supercharger, the Whipple 3.0L can move the same volume of air with lower power consumption and reduced discharge temperatures. Its larger displacement also provides greater airflow capacity than smaller 1.9L and 2.3L systems.

The twin-screw design produces immediate boost response and a broad, flat torque curve for stronger acceleration and increased mid-range power while maintaining performance at higher engine speeds.

132mm Roval Throttle Body and High-Flow Intake

The WK-2621-30 features a billet 132mm Roval electronic throttle body paired with Whipple's oversized Crusher inlet and unique 150mm Roval inlet design.

This combination increases airflow capacity while minimizing rotor cavitation, allowing the supercharger to deliver improved airflow and power potential.

A 123mm high-flow air intake system supplies the increased airflow required by the Gen 6 3.0L supercharger.

Patented Dual-Core, Dual-Pass Intercooling

Whipple's patented dual-core, dual-pass intercooler system is designed to control intake air temperatures during demanding driving conditions. The front-feed supercharger configuration accommodates an oversized aluminum bar-plate air-to-water intercooler with more than 33% greater core size than competing positive-displacement systems, according to Whipple.

The package includes a large heat exchanger and high-flow intercooler pump. Whipple states that its oversized heat exchanger system provides approximately 150% more volume than competing systems, increasing cooling capacity for sustained performance.

The larger intercooler arrangement helps reduce intake air temperatures and supports increased boost and ignition timing on pump gasoline.

An oversized intercooled air-bypass system helps reduce burst knock and parasitic losses while supporting fuel economy during normal driving conditions.

The supercharger also features a self-contained oversized oil system designed to reduce operating oil temperatures under demanding conditions.

Additional cooling options include larger intercooler pumps, dual electric 11-inch high-speed Spal fans for the standard heat exchanger, and an oversized dual-pass heat exchanger upgrade.

Fuel System and HP Tuners Calibration

The WK-2621-30 includes billet fuel rails and high-flow fuel injectors to support the increased fuel requirements of the supercharged 5.2L Voodoo engine.

An HP Tuners MPVI4 flash tool with Whipple calibration support is included to provide the calibration required for the supercharger system. Spark plugs are also supplied as part of the installation package.

Complete Installation and Belt Drive

Whipple supplies the necessary components and installation hardware for the Gen 6 3.0L system, including plug-and-play wiring with male and female connections.

The proven 6-rib belt-drive system features a heavy-duty spring-loaded tensioner and adjustable idler arrangement for reliable belt control. The lightweight pocketed aluminum supercharger pulley allows approximately three-minute pulley changes and simplifies belt replacement.

An optional 10-rib belt-drive system with matching billet pulleys is available for customers planning additional performance upgrades. Optional supercharger pulleys also provide flexibility for future configurations.

Available supercharger finishes include wrinkle black, polished, Ford textured blue, and custom colors.

Whipple has developed twin-screw supercharging technology since 1987. The WK-2621-30 is manufactured and assembled at Whipple's facility in Fresno, California, USA.

Features

  • Whipple Gen 6 W185AX 3.0L twin-screw supercharger system
  • Designed for 2016-2020 Ford Mustang Shelby GT350 and GT350R 5.2L Voodoo applications
  • Up to 875 horsepower and 660 lb-ft of torque on 93-octane fuel
  • Front-entry supercharger design for increased airflow and efficient boost production
  • Approximately 30% greater displacement than a 2.3L roots-style supercharger
  • Lower power consumption and reduced discharge temperatures when moving equivalent airflow
  • Immediate boost response and broad, flat torque curve
  • Oversized Crusher inlet for increased airflow and reduced rotor cavitation
  • Unique 150mm Roval inlet design
  • Billet 132mm Roval electronic throttle body included
  • 123mm high-flow air intake system included
  • Patented dual-core, dual-pass intercooler technology
  • Front-feed configuration accommodates an oversized intercooler core
  • Large aluminum bar-plate air-to-water intercooler with over 33% more core size than competing positive-displacement systems, according to Whipple
  • Oversized heat exchanger system with approximately 150% more volume than competing systems, according to Whipple
  • High-flow intercooler pump included
  • Designed to reduce intake air temperatures and support increased boost and ignition timing on pump gasoline
  • Oversized intercooled air-bypass system helps reduce burst knock, parasitic losses, and fuel consumption
  • Self-contained oversized supercharger oil system for reduced operating temperatures
  • Billet fuel rails included
  • High-flow fuel injectors included
  • HP Tuners MPVI4 flash tool included with Whipple calibration support
  • Spark plugs included
  • Complete installation components and necessary hardware supplied
  • Plug-and-play wiring with male and female connections
  • Proven 6-rib supercharger belt-drive system
  • Heavy-duty spring-loaded belt tensioner and adjustable idler system
  • Optional 10-rib belt-drive system with matching billet pulleys
  • Lightweight pocketed aluminum supercharger pulley
  • Approximately three-minute pulley changes and simplified belt replacement
  • Optional larger intercooler pumps available
  • Optional dual electric 11-inch high-speed Spal fans for the standard heat exchanger
  • Optional oversized dual-pass heat exchanger upgrade
  • Optional supercharger pulleys available for additional performance configurations
  • Available in wrinkle black, polished, Ford textured blue, and custom finishes
  • Manufactured and assembled in Fresno, California, USA
  • Whipple identifies this as the most powerful 50-state legal supercharger system for the GT350 / GT350R platform
  • CARB certified and 50-state legal under Executive Order D-231-87 for qualifying applications

Fitment

- 2016 Ford Mustang Shelby GT350 5.2L Voodoo V8
- 2017 Ford Mustang Shelby GT350 5.2L Voodoo V8
- 2018 Ford Mustang Shelby GT350 5.2L Voodoo V8
- 2019 Ford Mustang Shelby GT350 5.2L Voodoo V8
- 2020 Ford Mustang Shelby GT350 5.2L Voodoo V8
- 2016 Ford Mustang Shelby GT350R 5.2L Voodoo V8
- 2017 Ford Mustang Shelby GT350R 5.2L Voodoo V8
- 2018 Ford Mustang Shelby GT350R 5.2L Voodoo V8
- 2019 Ford Mustang Shelby GT350R 5.2L Voodoo V8
- 2020 Ford Mustang Shelby GT350R 5.2L Voodoo V8

Important Installation and Performance Notes

  • Engine Compatibility: Designed for 2016-2020 Ford Mustang Shelby GT350 and GT350R models equipped with the 5.2L Voodoo V8.
  • Calibration: Includes an HP Tuners MPVI4 flash tool with Whipple calibration support.
  • Fuel System: Billet fuel rails and high-flow fuel injectors are included.
  • Installation: The kit includes the necessary installation components, spark plugs, and plug-and-play wiring. No additional upgrades are required for the advertised power level on qualifying applications.
  • Cooling Upgrades: Optional larger intercooler pumps, dual 11-inch Spal fans, and an oversized dual-pass heat exchanger are available.
  • Belt Drive: Includes a 6-rib system with a heavy-duty spring-loaded tensioner and adjustable idler. An optional 10-rib belt system is available.
  • Emissions Compliance: CARB certified and 50-state legal under Executive Order D-231-87 for qualifying GT350 and GT350R applications.
  • Performance Disclaimer: Advertised output of up to 875 horsepower and 660 lb-ft of torque is based on 93-octane fuel under optimal conditions. Actual results may vary depending on operating conditions, fuel octane, and dynamometer type.

CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov