Whipple Gen 6 3.0L Supercharger Kit (WK-1211B) - 2021-2026 GM SUVs / 2023-2026 GM Trucks 6.2L L87
Increase the performance of your GM truck or SUV equipped with the 6.2L L87 V8 with the Whipple Gen 6 3.0L Supercharger Kit. Designed for 2021-2026 GM SUVs and 2023-2026 GM trucks utilizing the Global B platform, this intercooled twin-screw supercharger system delivers gains of over 170 rear-wheel horsepower, with total output potential of up to 685 horsepower and 655 lb-ft of torque under optimal conditions with 93 octane fuel.
Whipple's Gen 6 3.0L twin-screw supercharger provides immediate boost response, improved throttle response, and a broad torque curve for stronger acceleration, towing, and everyday driving. The system combines a high-efficiency Crusher inlet, oversized intercooler, and dual-pass heat exchanger system to support consistent performance under demanding conditions.
The Gen 6 supercharger features an integrated casting that minimizes additional adapters, potential leak points, and airflow restrictions. Its integrated Crusher venturi-shaped inlet incorporates a 112mm round opening designed to maximize airflow while minimizing rotor cavitation. This inlet outflows the smaller 90mm and 93mm inlets used on other Eaton-based systems and supports optional 102mm throttle bodies. The system is configured to retain the factory throttle body.
Whipple's zero-turn inlet design reduces induction losses associated with rear-inlet systems and 180-degree airflow bends. The discharge-down configuration minimizes pressure loss to produce more power at lower boost levels, while the top-mounted supercharger design promotes cooler operation compared to inverted supercharger layouts.
To manage intake temperatures, the system utilizes a large aluminum bar-plate air-to-water intercooler, oversized dual-pass heat exchanger, high-flow intercooler pump, and intercooler reservoir. The integrated design accommodates an oversized intercooler core to help reduce air charge temperatures and support increased boost and ignition timing on pump gasoline.
An oversized intercooled air-bypass system helps reduce burst knock while supporting fuel economy during normal driving. The supercharger also features a self-contained oversized oil system designed to reduce lubricant temperatures under demanding operating conditions.
The Whipple Big Mouth Crusher plastic air inlet is designed to increase airflow velocity and reduce inlet temperatures, with an optional carbon fiber version available. The kit includes a high-flow filter element and Whipple air inlet duct and is designed to work with the factory air box and mass airflow sensor.
Developed for compatible GM Global B applications, this system includes an LT4 3-bar TMAP sensor and calibration support. Installation requires an HP Tuners PCM unlock service, and PCM compatibility must be verified before ordering. The direct bolt-on design incorporates OEM-style quick-connect fittings for factory-style integration.
Features
- Whipple Gen 6 3.0L twin-screw supercharger system for compatible GM 6.2L L87 V8 Global B applications
- Delivers gains of over 170 rear-wheel horsepower
- Supports total output of up to 685 horsepower and 655 lb-ft of torque under optimal conditions with 93 octane fuel
- Manufacturer lists CARB EO D-231-146 and 50-state emissions legality
- Integrated supercharger casting minimizes adapters, potential leak points, and airflow restrictions
- Integrated Crusher venturi-shaped inlet maximizes airflow capacity while minimizing rotor cavitation
- 112mm round Crusher inlet provides greater airflow capacity than smaller 90mm and 93mm Eaton-based inlets
- Integrated inlet supports optional 102mm throttle bodies
- Whipple Big Mouth Crusher plastic air inlet improves airflow velocity and reduces inlet temperatures
- Optional carbon fiber air inlet available
- Zero-turn inlet design reduces induction losses associated with rear-inlet systems and 180-degree bends
- Discharge-down design minimizes pressure loss for increased power at lower boost levels
- Top-mounted supercharger design promotes cooler operation compared to inverted supercharger layouts
- Provides immediate boost response and strong low-RPM torque
- Flat torque curve supports improved acceleration and towing performance
- Oversized aluminum bar-plate air-to-water intercooler for increased cooling capacity
- Dual-pass heat exchanger and high-flow intercooler pump improve cooling efficiency
- Oversized intercooler core helps reduce air charge temperatures and supports additional boost and timing on pump gasoline
- Includes intercooler reservoir and complete low-temperature cooling circuit components
- Oversized intercooled air-bypass system helps reduce burst knock and maintain fuel economy
- Self-contained oversized supercharger oil system helps control oil temperatures under demanding conditions
- Retains the factory throttle body
- Includes high-flow air filter element and Whipple air inlet duct
- Designed to work with the factory air box and factory MAF sensor
- Supports compatible GM Global B applications with calibration support
- Includes LT4 3-bar TMAP sensor
- OEM-style quick-connect fittings simplify installation
- Direct bolt-on design for compatible applications
- Supercharger pulley changes can be completed in approximately 3 minutes
- Available in wrinkle black, polished, and custom color finishes
- Designed for stock, unmodified, and properly maintained engines
Included Components
- Whipple Gen 6 3.0L twin-screw supercharger
- Integrated Crusher inlet system
- Oversized aluminum bar-plate air-to-water intercooler
- Oversized dual-pass heat exchanger
- High-flow intercooler pump
- Intercooler reservoir and low-temperature cooling circuit components
- Whipple Big Mouth Crusher air inlet duct
- High-flow air filter element
- LT4 3-bar TMAP sensor
- Calibration support for compatible Global B applications
- Installation hardware and OEM-style quick-connect fittings
Fitment
- 2023 Chevrolet Cheyenne 6.2L L87 V8 Global B
- 2023 Chevrolet Silverado 1500 6.2L L87 V8 Global B
- 2024 Chevrolet Silverado 1500 6.2L L87 V8 Global B
- 2025 Chevrolet Silverado 1500 6.2L L87 V8 Global B
- 2026 Chevrolet Silverado 1500 6.2L L87 V8 Global B
- 2023 GMC Sierra 1500 6.2L L87 V8 Global B
- 2024 GMC Sierra 1500 6.2L L87 V8 Global B
- 2025 GMC Sierra 1500 6.2L L87 V8 Global B
- 2026 GMC Sierra 1500 6.2L L87 V8 Global B
- 2021 Cadillac Escalade 6.2L L87 V8 Global B
- 2022 Cadillac Escalade 6.2L L87 V8 Global B
- 2023 Cadillac Escalade 6.2L L87 V8 Global B
- 2024 Cadillac Escalade 6.2L L87 V8 Global B
- 2025 Cadillac Escalade 6.2L L87 V8 Global B
- 2026 Cadillac Escalade 6.2L L87 V8 Global B
- 2021 Cadillac Escalade ESV 6.2L L87 V8 Global B
- 2022 Cadillac Escalade ESV 6.2L L87 V8 Global B
- 2023 Cadillac Escalade ESV 6.2L L87 V8 Global B
- 2024 Cadillac Escalade ESV 6.2L L87 V8 Global B
- 2025 Cadillac Escalade ESV 6.2L L87 V8 Global B
- 2026 Cadillac Escalade ESV 6.2L L87 V8 Global B
- 2021 Chevrolet Tahoe 6.2L L87 V8 Global B
- 2022 Chevrolet Tahoe 6.2L L87 V8 Global B
- 2023 Chevrolet Tahoe 6.2L L87 V8 Global B
- 2024 Chevrolet Tahoe 6.2L L87 V8 Global B
- 2025 Chevrolet Tahoe 6.2L L87 V8 Global B
- 2026 Chevrolet Tahoe 6.2L L87 V8 Global B
- 2021 Chevrolet Suburban 6.2L L87 V8 Global B
- 2022 Chevrolet Suburban 6.2L L87 V8 Global B
- 2023 Chevrolet Suburban 6.2L L87 V8 Global B
- 2024 Chevrolet Suburban 6.2L L87 V8 Global B
- 2025 Chevrolet Suburban 6.2L L87 V8 Global B
- 2026 Chevrolet Suburban 6.2L L87 V8 Global B
- 2021 GMC Yukon 6.2L L87 V8 Global B
- 2022 GMC Yukon 6.2L L87 V8 Global B
- 2023 GMC Yukon 6.2L L87 V8 Global B
- 2024 GMC Yukon 6.2L L87 V8 Global B
- 2025 GMC Yukon 6.2L L87 V8 Global B
- 2026 GMC Yukon 6.2L L87 V8 Global B
- 2021 GMC Yukon XL 6.2L L87 V8 Global B
- 2022 GMC Yukon XL 6.2L L87 V8 Global B
- 2023 GMC Yukon XL 6.2L L87 V8 Global B
- 2024 GMC Yukon XL 6.2L L87 V8 Global B
- 2025 GMC Yukon XL 6.2L L87 V8 Global B
- 2026 GMC Yukon XL 6.2L L87 V8 Global B
Important Notes
- PCM Compatibility: Supports compatible GM Global B applications. Verify PCM compatibility before ordering.
- E90 Global B Service Tags: 12703518 and 12719704.
- PCM Unlock Required: An HP Tuners PCM unlock service is required before installation.
- Fuel Requirement: Premium gasoline with a minimum octane rating of 91 is required. Advertised peak power figures are based on 93 octane fuel.
- Engine Condition: Designed for stock, unmodified, and properly maintained engines.
- Spark Plugs: Requires Denso ITV22 or NGK 6510 spark plugs gapped to 0.032 inches.
- Supercharger Oil: W185FF compressor oil fill specification is 3.0 to 3.5 ounces of Whipple supercharger oil.
- Throttle Body: The system retains the factory throttle body. The integrated Crusher inlet supports optional 102mm throttle bodies.
- Emissions Compliance: Manufacturer lists CARB EO D-231-146 and 50-state legal status. Confirm that the specific vehicle and model year are covered by the applicable Executive Order.
- Performance: Advertised gains of over 170 rear-wheel horsepower and total output of up to 685 horsepower and 655 lb-ft of torque are based on optimal conditions with 93 octane fuel. Actual results may vary depending on vehicle condition, fuel quality, supporting modifications, weather, and dynamometer type.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov

