UPR Plug N Play 4.50" VTA Breather Tank Satin Silver (5048-002) - 2011-2026 Mustang, F-150 & Coyote Swap
The UPR Plug N Play 4.50" Vent to Atmosphere (VTA) Breather Tank provides a lightweight, high-flow solution for crankcase ventilation on your 2011-2026 Ford Mustang, F-150, or custom Coyote Swap project. Constructed from spun aluminum with a satin silver finish, this universal-fit breather tank allows remote mounting away from engine and exhaust heat while providing effective oil control through its internally baffled design.
Featuring dual 12AN ports, a removable internal splash guard, and a 1-quart capacity, the UPR VTA Breather Tank is designed for performance and racing applications where crankcase ventilation and weight savings are important. The Plug N Play kit includes 10 feet of Continental braided high-temperature oil-resistant hose, integrated push-lock fittings, and mounting hardware for flexible installation.
Lightweight Spun Aluminum Construction
The UPR VTA Breather Tank is manufactured from lightweight spun aluminum, providing a durable solution without adding unnecessary weight to your race car or performance vehicle.
The tank measures 4.50 inches in diameter and 7.00 inches in height, with a 1-quart capacity. Its satin silver finish provides a clean appearance for engine bay installations.
Dual 12AN Ports for High-Flow Ventilation
The breather tank features dual 12AN ports designed to support high-flow ventilation requirements.
These ports can also be adapted to smaller hose sizes using appropriate fittings, allowing the tank to accommodate different ventilation system configurations.
Included 12AN-to-5/8-inch UPR Plug N Play fittings feature integrated push-lock hose ends for convenient hose connections.
Internal Baffle and Removable Splash Guard
An internal baffle and splash guard help control oil movement inside the tank during operation.
The splash guard is removable for cleaning and maintenance, making it easier to service the tank as needed.
A drain plug located at the bottom of the tank allows collected oil or fluid to be drained without removing the entire assembly.
Remote Mounting Flexibility
The UPR VTA Breather Tank is designed to allow the engine breather to be mounted remotely, away from the engine and exhaust components.
The kit includes a 4.50-inch rubber-lined T-bolt clamp and mounting bracket to secure the tank in the desired location.
Ten feet of 5/8-inch Continental braided high-temperature oil-resistant hose provides flexibility when selecting a mounting location. The hose can be trimmed to the required length for a clean installation.
Multiple Ventilation Applications
In addition to crankcase ventilation, the UPR VTA Breather Tank can be used for rear axle or transmission venting applications.
The tank can also be used with or without a vacuum pump, providing flexibility for different performance and racing setups.
Features
- UPR Plug N Play 4.50-inch Vent to Atmosphere breather tank
- Universal-fit design for Mustang, F-150, and Coyote Swap applications
- Lightweight spun aluminum construction
- Satin silver finish
- 1-quart tank capacity
- 4.50-inch diameter and 7.00-inch height
- Dual 12AN ports for high-flow ventilation
- Ports can be adapted to smaller hose sizes with appropriate fittings
- Internal baffle and splash guard for improved oil control
- Removable splash guard for cleaning and maintenance
- Bottom-mounted drain plug for convenient fluid removal
- Designed for remote mounting away from engine and exhaust heat
- 4.50-inch rubber-lined T-bolt clamp included
- Mounting bracket included
- 10 feet of 5/8-inch Continental braided high-temperature oil-resistant hose
- 12AN-to-5/8-inch UPR Plug N Play fittings with integrated push-lock hose ends
- Hose can be trimmed to the desired installation length
- Can be used with or without a vacuum pump
- Suitable for crankcase, rear axle, or transmission venting applications
- Designed for performance and racing applications
- Made in the USA
Fitment
Ford Mustang
- 2011 Ford Mustang
- 2012 Ford Mustang
- 2013 Ford Mustang
- 2014 Ford Mustang
- 2015 Ford Mustang
- 2016 Ford Mustang
- 2017 Ford Mustang
- 2018 Ford Mustang
- 2019 Ford Mustang
- 2020 Ford Mustang
- 2021 Ford Mustang
- 2022 Ford Mustang
- 2023 Ford Mustang
- 2024 Ford Mustang
- 2025 Ford Mustang
- 2026 Ford Mustang
Ford F-150
- 2011 Ford F-150
- 2012 Ford F-150
- 2013 Ford F-150
- 2014 Ford F-150
- 2015 Ford F-150
- 2016 Ford F-150
- 2017 Ford F-150
- 2018 Ford F-150
- 2019 Ford F-150
- 2020 Ford F-150
- 2021 Ford F-150
- 2022 Ford F-150
- 2023 Ford F-150
- 2024 Ford F-150
- 2025 Ford F-150
- 2026 Ford F-150
Additional Applications
- Ford Mustang S197 Platform
- Ford Mustang S550 Platform
- Ford Mustang S650 Platform
- Ford Mustang Boss 302
- Ford Mustang Shelby GT350
- Ford Mustang Shelby GT500
- Ford Mustang Mach 1
- Ford Mustang Dark Horse
- Custom 5.0L Coyote Engine Swap Applications
Important Fitment and Installation Notes
Universal Fitment: This is a universal-fit breather tank intended for compatible Mustang, F-150, and Coyote Swap applications. Mounting location, hose routing, and connections may vary depending on the vehicle and engine configuration.
Mounting: Includes a rubber-lined T-bolt clamp and mounting bracket for remote installation. Verify sufficient mounting space and clearance from moving components and heat sources.
Ventilation Configuration: Can be used for crankcase, rear axle, or transmission venting and with or without a vacuum pump. Confirm that the selected configuration is appropriate for the application.
Maintenance: The removable splash guard allows cleaning, while the bottom drain plug provides access for draining collected fluids.
Emissions Disclaimer: This product does not carry a CARB Executive Order (EO) number and is intended for racing and off-road use only. It is not available for sale or use in California due to CARB and emissions restrictions. All California orders will be canceled and refunded.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
