TRZ Motorsports Universal Tie-Rod / Bump Steer Kit for Rack and Pinion - Weld-Up Kit (Over 7.000) - 202-UW
Custom-Length Bump Steer & Tie-Rod Adjuster Kit for Pinto Rack Systems
The TRZ Motorsports Universal Weld-Up Tie-Rod / Bump Steer Kit is the go-to solution when your steering setup requires an adjuster longer than 7.000?. Designed for custom chassis builds, race cars, and extreme geometry combinations, this kit lets you fabricate the exact-length adjusters needed to restore proper steering geometry and eliminate unwanted bump steer.
This universal package includes high-quality chrome-moly rod ends, strong Grade 8 hardware, and lightweight 6061 aluminum spacers. It works with both standard and shortened Pinto rack-and-pinion systems that use 1/2-20 threaded tie-rod ends. Installation requires drilling the tapered mounting hole in the spindle or steering arm to 1/2? for correct hardware fitment.
TRZ's sizing process ensures accuracy by helping you measure your vehicle's A-Dimension - the key distance used to determine adjuster requirements. If your measurement exceeds 7?, this weld-up kit is the proper choice.
Performance Features
- Build-your-own custom tie-rod adjusters for lengths over 7.000?
- Corrects steering geometry and reduces bump steer
- Includes chrome-moly rod ends for high strength
- 6061 aluminum spacers provide precise alignment
- Includes Grade 8 hardware for durability
- Requires drilling spindle/steering arm hole to 1/2?
- Compatible with Pinto racks using 1/2-20 threads
How to Measure Your A-Dimension
- Set the wheels perfectly straight
- Center your rack-and-pinion unit
- Aim tie-rods toward the steering arm mounting point
- Measure from rack thread end to the center of the mounting hole
- Both measurements must match - unequal values indicate a misaligned rack
Weld-Up Kit Contents
- (2) 12? pieces of 1? 4130 chromoly tubing
- (2) 1/2-20 Right-Hand tube inserts
- (2) 1/2-20 Left-Hand tube inserts
Quick Specs
- Application: Universal weld-up tie-rod & bump steer kit
- Adjuster Length Range: Over 7.000? (custom fabrication)
- Thread Type: 1/2-20 (Pinto rack compatible)
- Rod Ends: Chrome-moly
- Spacers: 6061 aluminum
- Hardware: Grade 8
- Part Number: 202-UW
Frequently Asked Questions
Why would I need the weld-up version?
If your measured A-Dimension exceeds 7 inches, standard adjuster kits will be too short. The weld-up kit lets you build the exact length needed.
Does the kit include everything required to fabricate the adjusters?
Yes. Tubing and both RH/LH threaded inserts are included, allowing you to weld the precise length adjusters for your steering setup.
Why Buy from Beefcake Racing?
Beefcake Racing stocks genuine TRZ Motorsports steering and chassis components with fast shipping and top-tier tech support. For help choosing the right adjuster kit, reach out at sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
