BMR T56 Six-Speed Manual Transmission Torque Arm Relocation Crossmember Red (TCC011R) - 1993-1997 F-Body LT1
Reinforce your chassis, eliminate drivetrain flex, and remove the destructive load from your gearbox casing with a Torque Arm Relocation Crossmember from BMR Suspension. On factory 1993-1997 GM F-Bodies, the torque arm mounts directly to the transmission tailshaft housing. Under aggressive street driving, high-horsepower launches, or hard cornering, this setup exerts extreme stress on the aluminum casing, frequently resulting in cracked or shattered transmission housings. BMR’s high-strength tubular crossmember replaces the flimsy factory stamped-steel unit, relocating the torque arm mount completely off the transmission and onto the rigid crossmember frame.
Engineered for high-performance street, drag racing, and handling applications, this red powdercoated crossmember is manufactured right here in the U.S.A. from robust 1.25-inch DOM steel tubing and high-strength, laser-cut steel plate. This heavy-duty tubular construction eliminates crossmember deflection, keeping your drivetrain properly aligned under load to deliver improved repeatability on the street, at the starting line, or through the corners. It is a direct-fit design that bolts seamlessly into the factory frame mounting locations. Installation takes approximately 1 to 2 hours.
NOTE: BMR’s TCC011 crossmembers are designed explicitly for factory LT1 configurations and will not work with LS-swapped vehicles without modification. As shipped, this unit is designed to work with BMR torque arms, but it may be used with stock or other aftermarket brands by installing a compatible front bushing.
Features
- Built from heavy-duty 1.25-inch DOM steel tubing with laser-cut steel plates for absolute rigidity
- 100% MIG-welded construction delivers maximum strength and structural stability
- Direct-fit design engineered specifically for T56 six-speed manual transmission setups
- Optimized for factory LT1 engine combinations in 1993-1997 Fourth Gen Camaros and Firebirds
- Relocates the torque arm mount to the crossmember to protect the fragile transmission tailshaft
- Removes factory crossmember deflection to preserve stable, consistent drivetrain alignment
- Durable, long-lasting red powdercoat finish proudly designed and made in the U.S.A.
Fitment
- 1993 Chevrolet Camaro / Pontiac Firebird (LT1)
- 1994 Chevrolet Camaro / Pontiac Firebird (LT1)
- 1995 Chevrolet Camaro / Pontiac Firebird (LT1)
- 1996 Chevrolet Camaro / Pontiac Firebird (LT1)
- 1997 Chevrolet Camaro / Pontiac Firebird (LT1)
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
