Steeda Adjustable 1-3/8-Inch Front Sway Bar (555-1029) - 2021-2026 Ford F-150
Improve cornering stability, steering response, and overall handling balance on your 2021-2026 Ford F-150 with the Steeda Adjustable 1-3/8-Inch Front Sway Bar. Designed specifically for the modern F-150 platform, this heavy-duty chromoly steel sway bar delivers a significant increase in front roll stiffness while maintaining the street-friendly ride quality expected from a daily-driven truck.
The two-position adjustable design lets you choose between 470 lb-ft and 550 lb-ft of roll stiffness compared to approximately 260 lb-ft from the factory front sway bar. This gives you the flexibility to tailor handling response to your truck's suspension setup and driving style while helping reduce body roll and improve confidence through corners.
Features
- Designed for 2021-2026 Ford F-150 applications
- 1-3/8-inch outer diameter front sway bar
- High-strength chromoly steel construction
- Two-position adjustable design
- 470 lb-ft softer setting
- 550 lb-ft stiffer setting
- Substantial increase over the approximately 260 lb-ft factory front sway bar rate
- Helps reduce body roll during cornering
- Improves steering response and chassis stability
- Helps create a more neutral and predictable handling balance
- Billet-machined sway bar ends
- Heavy-duty stamped-steel sway bar brackets
- 1-3/8-inch polyurethane sway bar bushings
- Durable grey finish
- Direct bolt-on installation
- Designed to retain excellent street ride quality
- Made in the USA
- Limited lifetime warranty
Two-Position Adjustable Handling
The Steeda front sway bar gives you two useful adjustment settings so you can tune front roll stiffness to match your preferred handling characteristics. The 470 lb-ft setting provides a strong improvement in body control while keeping the truck more forgiving, while the 550 lb-ft setting delivers a flatter and more responsive feel for drivers who want additional front-end control.
Helps Balance Rear Sway Bar Upgrades
Increasing rear roll stiffness can dramatically sharpen F-150 handling, but too much rear stiffness relative to the front can make the truck more prone to oversteer when pushed. Steeda developed this front sway bar to complement its Adjustable Rear Sway Bar and help restore a more neutral, predictable handling balance.
This makes the front bar an excellent companion upgrade for trucks already equipped with Steeda rear sway bar part numbers 555-1027 or 555-1028.
Reduced Body Roll Without Harsh Ride Quality
Unlike stiffer springs, a sway bar primarily works when the suspension moves from side to side during cornering. This allows the Steeda bar to significantly increase roll resistance and keep the truck flatter through corners without adding the ride harshness that often comes with substantially higher spring rates.
Heavy-Duty Construction
The 1-3/8-inch sway bar is manufactured from high-strength chromoly steel and uses billet-machined ends for strength in high-load areas. Heavy-duty stamped-steel brackets and polyurethane bushings provide a secure mounting system, while the grey finish helps protect the bar and gives the suspension a clean performance appearance.
Designed for Real-World F-150 Clearance
Steeda uses two carefully selected adjustment positions rather than adding an additional setting that could create clearance concerns on lifted, lowered, four-wheel-drive, or otherwise modified trucks. The result is meaningful adjustability while maintaining compatibility with a wide range of F-150 configurations.
Specifications
- Location: Front
- Bar Diameter: 1-3/8 Inches
- Material: Chromoly Steel
- Adjustment Positions: 2
- Setting 1: 470 lb-ft
- Setting 2: 550 lb-ft
- Factory Reference Rate: Approximately 260 lb-ft
- End Construction: Billet Machined
- Bracket Material: Stamped Steel
- Bushing Size: 1-3/8 Inches
- Bushing Material: Polyurethane
- Finish: Grey
- Installation: Direct Bolt-On
- Warranty: Limited Lifetime
- Country of Manufacture: USA
- Part Number: 555-1029
Fitment
- 2021 Ford F-150
- 2022 Ford F-150
- 2023 Ford F-150
- 2024 Ford F-150
- 2025 Ford F-150
- 2026 Ford F-150
Additional Notes
- Designed to complement Steeda F-150 Adjustable Rear Sway Bars 555-1027 and 555-1028.
- Two-position design provides useful adjustment while maintaining clearance on a wide range of truck configurations.
- Professional alignment is not typically required for a sway bar installation, but all suspension hardware should be properly torqued after installation.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
