null

SP Machining 2021+ F150 Predator Swap Kit w/ OZ Tuning Ethanol Forced Induction Tune (2021 - 2026 F150) SPM-SAK-005

Image is a representation of this item.
Actual item may vary.

Item#:
spmach-SPM-SAK-005
Regular price: $5,520.00
Sale price: $4,800.00
(No reviews yet) Write a Review

SP Machining Predator Supercharger Swap Kit with OZ Tuning Ethanol Forced Induction Tune (SPM-SAK-005) - 2021+ Ford F-150 5.0L

The SP Machining Predator Supercharger Swap Kit with OZ Tuning Ethanol Forced Induction Tune is designed to simplify the installation of a Ford Predator supercharger on a 2021+ Ford F-150 equipped with the Gen 4 5.0L Coyote engine. Developed in partnership with OZ Tuning, this kit combines billet aluminum intake adapters, supporting supercharger components, and an ethanol-focused forced induction tuning package.

Designed for a 100% bolt-on conversion using compatible GT500 or Raptor R supercharger head units, the kit includes a 6-rib front-end accessory drive (FEAD) system, modified VMP Predator fuel rails, intercooler cooling components, fuel injectors, spark plugs, and associated installation hardware.

Predator Supercharger Compatibility

The billet aluminum intake adapters allow compatible Predator supercharger head units from the Ford Mustang Shelby GT500 or Ford F-150 Raptor R to be installed on the 2021+ F-150 5.0L Gen 4 Coyote engine.

SP Machining developed this conversion to provide an affordable, straightforward installation solution with nearly all the supporting components needed for the retrofit.

OZ Tuning Ethanol Forced Induction Tune

This version of the Predator Swap Kit includes an OZ Tuning ethanol forced induction tune for the supercharged F-150 application.

Developed in partnership with OZ Tuning, the conversion is intended to support ethanol-fueled performance applications while retaining compatibility with the included Predator supercharger installation components.

SP Machining advertises a $100 savings when combining its Predator swap kit with an OZ forced induction tune.

Tuning Compatibility: OZ forced induction tuning is offered exclusively through HP Tuners. SCT tuning devices are not supported for OZ forced induction applications.

Complete 6-Rib FEAD System

The included 6-rib front-end accessory drive system provides the components required to drive the Predator supercharger. The system includes a balancer, A/C clutch, idlers, tensioner, and supercharger hub.

Fuel System and Intercooler Components

SP Machining includes VMP Predator fuel rails modified for the 2021+ F-150, along with 55 lb/hr fuel injectors.

A heat exchanger and Bosch intercooler pump are included to support the supercharger's charge-air cooling system.

The kit also includes Ford Performance spark plugs, a MAP sensor and extension harness, and a 3.5-inch supercharger pulley.

Tested Performance

SP Machining reports the following wheel horsepower and torque results using a 3.5-inch supercharger pulley:

  • 93 Octane: 588 wheel horsepower and 493 lb-ft of torque
  • E85: 652 wheel horsepower and 520 lb-ft of torque

The included 3.5-inch pulley is reported to produce approximately 10-11 psi of boost, depending on climate conditions.

SP Machining also states that E30 can produce similar power to E85 without requiring additional fuel system upgrades. Full E85 operation requires fuel system upgrades beyond the components listed in this kit.

Actual horsepower, torque, and boost levels may vary based on vehicle configuration, fuel, tuning, supporting modifications, and environmental conditions.

Features

  • Designed for 2021+ Ford F-150 5.0L Gen 4 Coyote engines
  • Supports compatible Ford Predator supercharger head units
  • Works with GT500 and Raptor R superchargers
  • Billet aluminum intake adapters designed for a 100% bolt-on conversion
  • Developed in partnership with OZ Tuning
  • Includes OZ Tuning ethanol forced induction tune
  • OZ forced induction tuning supported through HP Tuners
  • Advertised $100 savings when combining the kit with OZ forced induction tuning
  • Includes intake adapter hardware and O-rings
  • Complete 6-rib FEAD system with balancer, A/C clutch, idlers, tensioner, and supercharger hub
  • Modified VMP Predator fuel rails for 2021+ F-150 fitment
  • Heat exchanger and Bosch intercooler pump included
  • 55 lb/hr fuel injectors included
  • Ford Performance spark plugs included
  • MAP sensor and extension harness included
  • 3.5-inch supercharger pulley included
  • Approximately 10-11 psi of boost with the supplied pulley, depending on climate conditions
  • SP Machining reported 588 wheel horsepower and 493 lb-ft of torque on 93 octane
  • SP Machining reported 652 wheel horsepower and 520 lb-ft of torque on E85 with appropriate fuel system upgrades

Kit Includes

  • Billet aluminum Predator supercharger intake adapters
  • Intake adapter mounting hardware and O-rings
  • 6-rib FEAD system including balancer, A/C clutch, idlers, tensioner, and supercharger hub
  • VMP Predator fuel rails modified for 2021+ Ford F-150 fitment
  • Heat exchanger
  • Bosch intercooler pump
  • 55 lb/hr fuel injectors
  • Ford Performance spark plugs
  • MAP sensor and extension harness
  • 3.5-inch supercharger pulley
  • OZ Tuning ethanol forced induction tune

Fitment

- 2021 Ford F-150 5.0L V8
- 2022 Ford F-150 5.0L V8
- 2023 Ford F-150 5.0L V8
- 2024 Ford F-150 5.0L V8
- 2025 Ford F-150 5.0L V8
- 2026 Ford F-150 5.0L V8

Important Fitment and Installation Notes

Supercharger Compatibility: Designed for Predator supercharger head units from the Ford Mustang Shelby GT500 and Ford F-150 Raptor R. The supercharger head unit itself is not listed among the included components and must be sourced separately.

Fuel System Limitations: SP Machining specifies 91-octane, 93-octane, and E30 fuel compatibility for this combination without additional fuel system upgrades. Full E85 operation requires fuel system upgrades.

Ethanol Tune: Although this kit includes an OZ ethanol forced induction tune, the included fuel system components alone are not stated to support E85 operation. Confirm the required fuel system upgrades and intended ethanol blend with the tuner before installation.

E30 Performance: SP Machining states that E30 can produce similar power to its E85 results without additional fuel system upgrades.

Fuel Pump Booster: SP Machining has announced plans for a wide-open-throttle (WOT) activated fuel pump booster for applications using smaller supercharger pulleys or E85. Confirm current availability before ordering.

Boost Pressure: The included 3.5-inch pulley is reported to produce approximately 10-11 psi of boost, depending on climate conditions.

Tuning Compatibility: The OZ ethanol forced induction tune is supported through HP Tuners only. SCT devices are not supported. Verify any additional tuning hardware or licensing requirements before installation.

Professional Installation: SP Machining recommends professional installation.

Vehicle Compatibility: Intended for 2021+ Ford F-150 trucks equipped with the Gen 4 5.0L Coyote engine. Verify compatibility with the intended Predator supercharger and supporting components before ordering.

CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov