SP Machining Predator Supercharger Swap Adapters & Fuel Rails (SPM-SAK-002) - 2021+ Ford F-150 5.0L
The SP Machining Predator Supercharger Swap Adapter Kit with Fuel Rails is designed to simplify the installation of a Ford Predator supercharger on a 2021+ Ford F-150 equipped with the Gen 4 5.0L Coyote engine. Featuring billet aluminum intake adapters and modified VMP Predator fuel rails, this kit provides a bolt-on mounting solution for compatible GT500 and Raptor R supercharger head units.
Developed in partnership with OZ Tuning, SP Machining engineered this kit to offer an affordable and straightforward way to retrofit a Predator supercharger onto the Gen 4 Coyote platform.
Predator Supercharger Compatibility
The billet aluminum intake adapters are designed to allow a 100% bolt-on installation of compatible Predator superchargers on the 2021+ F-150 5.0L engine.
The kit supports supercharger head units from the Ford Mustang Shelby GT500 and Ford F-150 Raptor R. Included mounting hardware and O-rings provide the components needed for installing the adapters.
Modified VMP Predator Fuel Rails
Unlike the adapters-only version, this kit includes VMP Predator fuel rails modified specifically to fit the 2021+ Ford F-150 application.
Combining the intake adapters with the modified fuel rails provides additional components needed for the Predator supercharger conversion without requiring the fuel rails to be sourced and modified separately.
Tested Performance
SP Machining reports the following wheel horsepower and torque results from testing with a 3.5-inch supercharger pulley:
- 93 Octane: 588 wheel horsepower and 493 lb-ft of torque
- E85: 652 wheel horsepower and 520 lb-ft of torque
Actual results may vary depending on vehicle configuration, fuel system, tuning, and supporting modifications. Fuel system upgrades are required for E85 operation.
OZ Tuning Partnership
SP Machining developed this conversion in partnership with OZ Tuning. An optional OZ forced induction tune can be added to the kit, with SP Machining advertising a $100 savings when purchased together.
OZ forced induction tuning is available exclusively through HP Tuners. SCT tuning devices are not supported for these forced induction applications.
Features
- Designed for 2021+ Ford F-150 5.0L Gen 4 Coyote engines
- Allows installation of compatible Ford Predator superchargers
- Compatible with GT500 and Raptor R supercharger head units
- Billet aluminum intake adapter construction
- Designed for a 100% bolt-on adapter installation
- Includes modified VMP Predator fuel rails for 2021+ F-150 applications
- Includes intake adapter mounting hardware and O-rings
- Developed in partnership with OZ Tuning
- Tested at 588 wheel horsepower and 493 lb-ft of torque on 93 octane
- Tested at 652 wheel horsepower and 520 lb-ft of torque on E85 with appropriate fuel system upgrades
- Reported performance figures achieved with a 3.5-inch supercharger pulley
- Optional OZ forced induction tuning available through HP Tuners
- Advertised $100 savings when adding an OZ forced induction tune
Kit Includes
- Billet aluminum Predator supercharger intake adapters
- Associated adapter mounting hardware
- Intake adapter O-rings
- VMP Predator fuel rails modified for 2021+ Ford F-150 fitment
Fitment
- 2021 Ford F-150 5.0L V8
- 2022 Ford F-150 5.0L V8
- 2023 Ford F-150 5.0L V8
- 2024 Ford F-150 5.0L V8
- 2025 Ford F-150 5.0L V8
- 2026 Ford F-150 5.0L V8
Important Fitment and Installation Notes
Supercharger Compatibility: Designed for Predator supercharger head units from the Ford Mustang Shelby GT500 and Ford F-150 Raptor R.
Kit Configuration: This version includes the intake adapters, associated hardware, O-rings, and modified VMP Predator fuel rails. The supercharger head unit and other components needed to complete the conversion are not listed as included.
Fuel System Limitations: SP Machining specifies 91-octane, 93-octane, and E30 fuels for this combination without additional fuel system upgrades. E85 operation requires fuel system upgrades.
E30 Performance: SP Machining states that E30 can produce similar power to its E85 results without requiring fuel system upgrades.
Fuel Pump Booster: SP Machining has announced a planned wide-open-throttle (WOT) activated fuel pump booster for applications using smaller supercharger pulleys or E85. Confirm current availability separately.
Tuning Compatibility: OZ forced induction tuning is offered through HP Tuners only. SCT devices are not supported for OZ forced induction tuning.
Performance Results: The reported 588/493 and 652/520 wheel horsepower and torque figures were achieved with a 3.5-inch pulley using 93-octane gasoline and E85, respectively. Individual results may vary.
Vehicle Compatibility: Intended for 2021+ Ford F-150 trucks equipped with the Gen 4 5.0L Coyote engine. Verify compatibility with the intended supercharger and supporting components before ordering.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov

