BMR Rear Sway Bar Mounting Kit - Weld-On - Bare Finish (SMK006) - 1982-2002 F-Body / 1978-1987 G-Body / 1964-1972 A-Body
Easily adapt your rear anti-roll system to a custom aftermarket rear end housing with the Weld-On Rear Sway Bar Mounting Kit (SMK006) from BMR Suspension. Upgrading the rear differential in your classic or late-model GM vehicle often leaves you without proper factory-style sway bar mounting provisions on the axle tubes. BMR engineered this weld-on bracket kit to resolve that exact issue, allowing you to seamlessly retain your existing rear sway bar, mounting saddles, and end links when moving to a high-performance rear axle setup. It is optimized for maximum muscle car versatility across street performance, pro-touring, and hard-launching drag racing applications.
Constructed to survive severe launch loads and structural chassis twisting, the brackets in the SMK006 kit are manufactured from heavy-duty 3/16-inch steel plate that is precision laser-cut and CNC-formed. This heavy-duty composition ensures an exact contour match over any high-performance aftermarket rear end housing featuring 3.00-inch to 3.25-inch diameter axle tubes. Shipped in a bare, uncoated finish, these brackets are optimized for clean welding directly onto your axle housing. This weld-on design is the perfect solution for custom narrow rear ends or Ford 9-inch housings equipped with a rear backbrace, where standard bolt-on clamp-style brackets physically cannot clear the reinforcement structure. The kit includes zinc-coated assembly hardware to secure your sway bar saddles once the brackets are permanently welded in place.
IMPORTANT FITMENT & INSTALLATION NOTES:
- Chassis Compatibility: Fits 1982-2002 GM F-Body (Camaro/Firebird), 1978-1987 GM G-Body (Regal, Grand National, Monte Carlo, El Camino, Cutlass, Grand Prix), and 1964-1972 GM A-Body (Chevelle, Malibu, GTO, LeMans, Cutlass, Skylark) platforms.
- Axle Housing Requirement: Fits any performance or custom rear end housing built with 3.00-inch to 3.25-inch diameter outer axle tubes.
- Backbrace Compatibility: Perfect for Ford 9-inch, Dana 60, or 12-bolt differentials featuring integrated rear housing backbraces that prevent the use of bolt-on clamps.
- Sway Bar Compatibility: Designed to allow you to reuse standard factory or aftermarket sway bars, saddle brackets, and end link setups from your previous configuration.
- Installation: Weld-on design requires professional welding and preparation tools. Estimated installation time is approximately 2 hours.
Features
- Fits 1982-2002 GM F-Body, 1978-1987 GM G-Body, and 1964-1972 GM A-Body models
- Custom-contoured to fit performance rear end housings with 3" to 3.25" axle tubes
- Weld-on engineering provides a permanent solution ideal for housings with integrated backbraces
- Allows full reuse of your existing rear sway bar, mounting saddles, and end links
- Manufactured from heavy-duty laser-cut and CNC-formed 3/16-inch structural steel plate
- Engineered to handle severe loading across street, drag strip, and handling applications
- Shipped bare and uncoated to allow direct, clean welding to the axle tubes
- Supplied complete with corrosion-resistant, zinc-coated saddle mounting hardware
- Straightforward installation process takes roughly 2 hours
- Proudly designed and manufactured in the U.S.A.
Fitment
Chevrolet Camaro (3rd & 4th Gen Platforms with 3" - 3.25" Axle Tubes):
- 1982 Chevrolet Camaro
- 1983 Chevrolet Camaro
- 1984 Chevrolet Camaro
- 1985 Chevrolet Camaro
- 1986 Chevrolet Camaro
- 1987 Chevrolet Camaro
- 1988 Chevrolet Camaro
- 1989 Chevrolet Camaro
- 1990 Chevrolet Camaro
- 1991 Chevrolet Camaro
- 1992 Chevrolet Camaro
- 1993 Chevrolet Camaro
- 1994 Chevrolet Camaro
- 1995 Chevrolet Camaro
- 1996 Chevrolet Camaro
- 1997 Chevrolet Camaro
- 1998 Chevrolet Camaro
- 1999 Chevrolet Camaro
- 2000 Chevrolet Camaro
- 2001 Chevrolet Camaro
- 2002 Chevrolet Camaro
Pontiac Firebird / Formula / Trans Am (3rd & 4th Gen Platforms with 3" - 3.25" Axle Tubes):
- 1982 Pontiac Firebird / Trans Am
- 1983 Pontiac Firebird / Trans Am
- 1984 Pontiac Firebird / Trans Am
- 1985 Pontiac Firebird / Trans Am
- 1986 Pontiac Firebird / Trans Am
- 1987 Pontiac Firebird / Formula / Trans Am
- 1988 Pontiac Firebird / Formula / Trans Am
- 1989 Pontiac Firebird / Formula / Trans Am
- 1990 Pontiac Firebird / Formula / Trans Am
- 1991 Pontiac Firebird / Formula / Trans Am
- 1992 Pontiac Firebird / Formula / Trans Am
- 1993 Pontiac Firebird / Formula / Trans Am
- 1994 Pontiac Firebird / Formula / Trans Am
- 1995 Pontiac Firebird / Formula / Trans Am
- 1996 Pontiac Firebird / Formula / Trans Am
- 1997 Pontiac Firebird / Formula / Trans Am
- 1998 Pontiac Firebird / Formula / Trans Am
- 1999 Pontiac Firebird / Formula / Trans Am
- 2000 Pontiac Firebird / Formula / Trans Am
- 2001 Pontiac Firebird / Formula / Trans Am
- 2002 Pontiac Firebird / Formula / Trans Am
GM G-Body Platforms (Buick Regal, Chevy Monte Carlo, Olds Cutlass, Pontiac Grand Prix with 3" - 3.25" Axle Tubes):
- 1978 GM G-Body
- 1979 GM G-Body
- 1980 GM G-Body
- 1981 GM G-Body
- 1982 GM G-Body
- 1983 GM G-Body
- 1984 GM G-Body
- 1985 GM G-Body
- 1986 GM G-Body
- 1987 GM G-Body
GM A-Body Platforms (Chevelle, Malibu, GTO, LeMans, Skylark, Cutlass with 3" - 3.25" Axle Tubes):
- 1964 GM A-Body
- 1965 GM A-Body
- 1966 GM A-Body
- 1967 GM A-Body
- 1968 GM A-Body
- 1969 GM A-Body
- 1970 GM A-Body
- 1971 GM A-Body
- 1972 GM A-Body
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
