BMR Rear Sway Bar Mounting Kit with 19mm Bushings - Weld-On - Bare Finish (SMK003) - 1982-2002 GM F-Body
Easily adapt or add a 19mm rear anti-roll system to a custom aftermarket rear end housing with the Weld-On Rear Sway Bar Mounting Kit (SMK003) from BMR Suspension. Upgrading the rear differential in your third- or fourth-generation F-Body often leaves you without proper factory-style sway bar mounting provisions on the axle tubes. BMR engineered this comprehensive weld-on kit to resolve that exact issue. Unlike basic bracket kits, this complete package includes heavy-duty brackets, form-fitting heavy-duty mounting saddles, high-durometer polyurethane bushings, and complete sway bar end links, making it the ultimate solution for adding maximum body roll control to a high-performance rear axle setup. It is optimized for maximum muscle car versatility across street performance, pro-touring, and hard-launching drag racing applications.
Constructed to survive severe launch loads and structural chassis twisting, the axle brackets in the SMK003 kit are manufactured from heavy-duty 3/16-inch steel plate that is precision laser-cut and CNC-formed. This heavy-duty composition ensures an exact contour match over any high-performance aftermarket rear end housing featuring 3.00-inch to 3.25-inch diameter axle tubes (such as built Ford 8.8, 9-inch, or 12-bolt configurations). Shipped in a bare, uncoated finish, these brackets are optimized for clean welding directly onto your axle housing. The system features BMR's heavy-duty formed steel sway bar saddles paired with 95-durometer polyurethane bushings engineered specifically for 19mm (3/4-inch) diameter sway bars. These bushings significantly reduce compliance and deflection compared to stock rubber, ensuring immediate anti-roll bar rate transfer while remaining fully greasable for smooth, squeak-free operation. The kit is rounded out with zinc-coated assembly hardware and new polyurethane-bushed end links to refresh your entire rear suspension connection.
IMPORTANT FITMENT & INSTALLATION NOTES:
- Chassis Compatibility: Fits all 1982-1992 (3rd Gen) and 1993-2002 (4th Gen) GM F-Body rear-wheel-drive platforms (Camaro, Z28, SS, Firebird, Formula, Trans Am).
- Axle Housing Requirement: Fits any performance or custom rear end housing built with 3.00-inch to 3.25-inch diameter outer axle tubes.
- Sway Bar Compatibility: Specifically designed to accept and support any factory or aftermarket 19mm diameter rear sway bar.
- Installation: Weld-on design requires professional welding and preparation tools. Estimated installation time is approximately 2 hours.
Features
- Fits 1982-2002 Chevrolet Camaro and Pontiac Firebird/Trans Am models
- Custom-contoured to fit performance rear end housings with 3" to 3.25" axle tubes
- Comprehensive package adds complete sway bar mounting provisions to empty axle housings
- Includes heavy-duty formed steel bushing saddles and low-deflection 95-durometer polyurethane bushings
- Supplied with complete rear sway bar end links featuring polyurethane bushings
- Specially engineered to accommodate and optimize any 19mm rear sway bar setup
- Manufactured from heavy-duty laser-cut and CNC-formed 3/16-inch structural steel plate
- Shipped bare and uncoated to allow direct, clean welding to the axle tubes
- Greasable bushing design ensures smooth, silent, and fluid suspension articulation
- Supplied complete with high-tensile, corrosion-resistant zinc-coated hardware
- Straightforward installation process takes roughly 2 hours
- Proudly designed and manufactured in the U.S.A.
Fitment
Chevrolet Camaro (3rd & 4th Gen Platforms with 3" - 3.25" Axle Tubes & 19mm Sway Bar):
- 1982 Chevrolet Camaro
- 1983 Chevrolet Camaro
- 1984 Chevrolet Camaro
- 1985 Chevrolet Camaro
- 1986 Chevrolet Camaro
- 1987 Chevrolet Camaro
- 1988 Chevrolet Camaro
- 1989 Chevrolet Camaro
- 1990 Chevrolet Camaro
- 1991 Chevrolet Camaro
- 1992 Chevrolet Camaro
- 1993 Chevrolet Camaro
- 1994 Chevrolet Camaro
- 1995 Chevrolet Camaro
- 1996 Chevrolet Camaro
- 1997 Chevrolet Camaro
- 1998 Chevrolet Camaro
- 1999 Chevrolet Camaro
- 2000 Chevrolet Camaro
- 2001 Chevrolet Camaro
- 2002 Chevrolet Camaro
Pontiac Firebird / Formula / Trans Am (3rd & 4th Gen Platforms with 3" - 3.25" Axle Tubes & 19mm Sway Bar):
- 1982 Pontiac Firebird / Trans Am
- 1983 Pontiac Firebird / Trans Am
- 1984 Pontiac Firebird / Trans Am
- 1985 Pontiac Firebird / Trans Am
- 1986 Pontiac Firebird / Trans Am
- 1987 Pontiac Firebird / Formula / Trans Am
- 1988 Pontiac Firebird / Formula / Trans Am
- 1989 Pontiac Firebird / Formula / Trans Am
- 1990 Pontiac Firebird / Formula / Trans Am
- 1991 Pontiac Firebird / Formula / Trans Am
- 1992 Pontiac Firebird / Formula / Trans Am
- 1993 Pontiac Firebird / Formula / Trans Am
- 1994 Pontiac Firebird / Formula / Trans Am
- 1995 Pontiac Firebird / Formula / Trans Am
- 1996 Pontiac Firebird / Formula / Trans Am
- 1997 Pontiac Firebird / Formula / Trans Am
- 1998 Pontiac Firebird / Formula / Trans Am
- 1999 Pontiac Firebird / Formula / Trans Am
- 2000 Pontiac Firebird / Formula / Trans Am
- 2001 Pontiac Firebird / Formula / Trans Am
- 2002 Pontiac Firebird / Formula / Trans Am
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
