BMR Sway Bar Kit Front & Rear Black (2015-2023 Mustang / 2024 Mustang) SB043H

BMR Suspension Black Hammertone Front and Rear Sway Bar Kit w/Bushings for 2015-2016 Mustang

BMR Suspension designed these adjustable sway bars for street performance, autocross, and road race applications. The SB043 feature three positions on the front sway bar and three positions on the rear sway bar. BMR Sway Bar Kit is great for Mustang owners who frequent the track with a daily driven car. Adjust the suspension stiffness for track conditions, tire wear and overall ride quality.

The two primary functions of sway bars are to control body roll and to determine the understeer or oversteer behavior of a vehicle. Stock sway bars have low torsional spring rates because they are manufactured from small diameter bar stock or tubing. BMR Suspensions SB043 front and rear sway bar kit was designed by factoring in the vehicle weight, application, motion ratio, coil spring rate, and adjustability requirements.

Manufactured from heavy-duty 35mm (front) and 25mm (rear)DOM steel tubing, the SB043 is cold formed to better resist torsional fatigue and retain its "memory" far longer

than the hot-formed bars used by many competitors. The sway bar is CNC-formed for exact manufacturing tolerances and repeatable high quality. The SB043 attaches to your S550 Mustang with polyurethane bushings, reducing the deflection from the stock

rubber bushings. These bushings are molded from 88-durometer, low-deflection, polyurethane, and are internally fluted to keep grease in the bushing.

BMR Suspension designed the SB043 sway bar kit for street performance, autocross, and road race applications. The large adjustable sway bars have three positions that give you the versatility to drive to and from the road course or autocross and still out handle the competition with the same sway bars. The SB043 front sway bar gives you a 28%-70% increase in sway bar rate, and the rear bar gives you a 63%-208% increase in rate over the stock bar. These rate increases and adjustability allow you to fine-tune the handling characteristics of your S550 Mustang so you can drive harder through corners with minimal body roll. The hollow design allows for loads of strength in the lightest package possible. This means increased performance with no sacrifices. The SB043 attaches to

your Mustang with 88-durometer polyurethane bushings, reducing the deflection from the stock rubber bushings. This allows for more sway bar control, which equals better

handling. When performance is a must, rely on BMR Suspension!

Front Sway Bar SB044

- Fits all S550 Mustangs

- Designed for street performance, autocross, and road race applications

- Dramatically reduces body roll

- 28%-70% increase in sway bar rate

- Cold formed to better resist torsional fatigue

- Manufactured from 35mm heavy-wall DOM tubing for increased strength

- Three-way adjustable for street and track use

- Adjustability allows for fine-tuning of suspension

- 88-durometer, greasable polyurethane bushings

- Zinc-plated inner sleeves

- Billet aluminum, black anodized bushings saddles

- Durable powdercoat finish

- 1-hour installation time

- Proudly designed in the U.S.A.

- Proudly made in the U.S.A.

Rear Sway Bar SB045

- Fits S550 Mustangs

- Designed for street performance, autocross, and road race applications

- Dramatically reduces body roll

- 63%-208% increase is sway bar rate over stock sway bar

- Cold formed to better resist torsional fatigue

- Manufactured from 25mm heavy-duty bar stock for increased strength

- Three-way adjustable design

- 88-durometer, greasable polyurethane bushings

- Zinc-plated inner sleeves

- Durable powdercoat finish

- 1-2-hour installation time

- Proudly designed in the U.S.A.

- Proudly made in the U.S.A.

Beefcake Racing is an Authorized Dealer for BMR Suspension Components, call 1-855-827-7223, 9am-9pm EST