BMR Suspension Front and Rear Sway Bar Kit Red (SB026R) - 1993-2002 GM F-Body
Dramatically reduce body roll and elevate the handling limits of your fourth-generation Camaro or Firebird with the BMR Suspension Front and Rear Sway Bar Kit. Factory fourth-gen sway bars feature soft torsional spring rates because they are built from small-diameter materials, causing your performance car to lean heavily and react slowly during aggressive cornering. This premium red powder-coated performance package delivers the high-load stiffness needed to keep your chassis flat and balanced on the street, autocross course, or road racing track.
Every SB026R kit is proudly designed and made in the USA from heavy-wall 35mm front and 25mm rear DOM steel tubing, cold-formed to survive intense track abuse while resisting torsional fatigue far longer than hot-formed bars. This non-adjustable front and rear setup delivers a massive 129 percent increase in front rate and a 149 percent increase in rear rate over the original factory bars. This bolt-on package comes complete with greaseable 88-durometer polyurethane bushings and premium Grade 8 mounting hardware to minimize deflection and keep your tires planted.
Features
- Delivers a massive 129 percent front and 149 percent rear rate increase over stock equipment
- Dramatically minimizes body roll and improves transitional cornering response
- Manufactured from heavy-wall 35mm front and 25mm rear DOM steel tubing for incredible strength
- Cold-formed to better resist torsional fatigue and retain its memory under extreme loads
- Includes greaseable, low-deflection 88-durometer polyurethane bushings for precise, quiet operation
- Equipped with heavy-duty Grade 8 mounting hardware
- Finished in a durable, brilliant red powder coat for maximum corrosion resistance
- Straightforward installation taking approximately 3 to 4 hours
- Proudly designed and manufactured in the USA
Fitment
- 1993 Chevrolet Camaro (Base, Z28)
- 1994 Chevrolet Camaro (Base, Z28)
- 1995 Chevrolet Camaro (Base, Z28)
- 1996 Chevrolet Camaro (Base, Z28, SS)
- 1997 Chevrolet Camaro (Base, Z28, SS)
- 1998 Chevrolet Camaro (Base, Z28, SS)
- 1999 Chevrolet Camaro (Base, Z28, SS)
- 2000 Chevrolet Camaro (Base, Z28, SS)
- 2001 Chevrolet Camaro (Base, Z28, SS)
- 2002 Chevrolet Camaro (Base, Z28, SS)
- 1993 Pontiac Firebird (Base, Formula, Trans Am)
- 1994 Pontiac Firebird (Base, Formula, Trans Am)
- 1995 Pontiac Firebird (Base, Formula, Trans Am)
- 1996 Pontiac Firebird (Base, Formula, Trans Am)
- 1997 Pontiac Firebird (Base, Formula, Trans Am)
- 1998 Pontiac Firebird (Base, Formula, Trans Am)
- 1999 Pontiac Firebird (Base, Formula, Trans Am)
- 2000 Pontiac Firebird (Base, Formula, Trans Am)
- 2001 Pontiac Firebird (Base, Formula, Trans Am)
- 2002 Pontiac Firebird (Base, Formula, Trans Am)
- Note: When installing this kit on convertible F-body models, you may need to trim or remove the additional front support brace above the steering rack for proper clearance.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
