BMR Suspension Rear Suspension Upgrade Kit Black Hammertone (RSK036H) - 1982-2002 GM F-Body
Eliminate rear axle flex, minimize wheel hop, and dial in perfect suspension alignment on your Third or Fourth Generation GM F-Body with the BMR Suspension Polyurethane and Rod End On-Car Adjustable Rear Suspension Kit. Factory stamped-steel lower control arms and Panhard rods, paired with soft rubber bushings, deflect significantly under load. Instead of directing your engine's power straight to the pavement, these weak stock components absorb energy, causing violent wheel hop, erratic cornering, and rear-axle misalignment. This premium package combines BMR's heavy-duty lower control arms (TCA004) and matching Panhard rod (PHR010) to deliver unyielding structural strength and easily adjustable rear suspension geometry.
Every RSK036H kit is proudly designed and manufactured in the USA from heavy-duty 1.25-inch diameter, 0.120-inch wall DOM steel tubing to easily withstand aggressive launches, drag strip passes, and hard cornering. To ensure a highly responsive steering and traction feel while preserving street-friendly comfort, BMR utilizes a hybrid design. One end of each link features a greasable, 95-durometer polyurethane bushing. These high-performance bushings are internally fluted to channel grease directly to the outer thrust surfaces, keeping them fully lubricated and ensuring quiet, reliable operation. The opposite end is equipped with a heavy-duty, Teflon-lined spherical rod end from Viking Performance. This combo cuts bushing deflection in half while allowing bind-free suspension articulation.
Adjusting your suspension has never been easier. Both the lower control arms and the Panhard rod utilize integrated, center-mounted adjusters with left and right-hand threads, allowing you to easily adjust your wheelbase, correct thrust angles, and center the rear axle with simple hand tools right on the car. Finished in a durable, durable black hammertone powder coat, this kit is highly resistant to corrosion and adds a high-performance look to your chassis. Complete with zinc-coated inner sleeves and all necessary hardware, this direct bolt-on upgrade is the ultimate choice for the enthusiast who demands peak performance on the street, strip, or track.
Features
- Complete on-car adjustable rear suspension kit featuring heavy-duty lower control arms and a Panhard rod
- Constructed from heavy-duty 1.25-inch diameter, 0.120-inch wall DOM steel tubing
- On-car adjustable design with left and right-hand threaded adjusters for fast, simple alignment changes
- Hybrid design pairs greasable, internally fluted 95-durometer polyurethane bushings with Teflon-lined Viking Performance spherical rod ends
- Dramatically reduces control arm flex and cuts bushing deflection in half to eliminate wheel hop and maximize power transfer
- Zinc-coated inner sleeves ensure smooth, corrosion-free bushing articulation
- Finished in a tough, resilient black hammertone powder coat for lasting durability and clean aesthetics
- Provides a massive improvement in rear-axle stability with highly acceptable NVH levels
- Designed for street performance, drag racing, and road course applications
- Straightforward bolt-on installation taking approximately 3 to 4 hours
- Proudly designed and manufactured in the USA
Fitment
Chevrolet:
- 1982 Chevrolet Camaro
- 1983 Chevrolet Camaro
- 1984 Chevrolet Camaro
- 1985 Chevrolet Camaro
- 1986 Chevrolet Camaro
- 1987 Chevrolet Camaro
- 1988 Chevrolet Camaro
- 1989 Chevrolet Camaro
- 1990 Chevrolet Camaro
- 1991 Chevrolet Camaro
- 1992 Chevrolet Camaro
- 1993 Chevrolet Camaro
- 1994 Chevrolet Camaro
- 1995 Chevrolet Camaro
- 1996 Chevrolet Camaro
- 1997 Chevrolet Camaro
- 1998 Chevrolet Camaro
- 1999 Chevrolet Camaro
- 2000 Chevrolet Camaro
- 2001 Chevrolet Camaro
- 2002 Chevrolet Camaro
Pontiac:
- 1982 Pontiac Firebird / Trans Am
- 1983 Pontiac Firebird / Trans Am
- 1984 Pontiac Firebird / Trans Am
- 1985 Pontiac Firebird / Trans Am
- 1986 Pontiac Firebird / Trans Am
- 1987 Pontiac Firebird / Trans Am
- 1988 Pontiac Firebird / Trans Am
- 1989 Pontiac Firebird / Trans Am
- 1990 Pontiac Firebird / Trans Am
- 1991 Pontiac Firebird / Trans Am
- 1992 Pontiac Firebird / Trans Am
- 1993 Pontiac Firebird / Trans Am
- 1994 Pontiac Firebird / Trans Am
- 1995 Pontiac Firebird / Trans Am
- 1996 Pontiac Firebird / Trans Am
- 1997 Pontiac Firebird / Trans Am
- 1998 Pontiac Firebird / Trans Am
- 1999 Pontiac Firebird / Trans Am
- 2000 Pontiac Firebird / Trans Am
- 2001 Pontiac Firebird / Trans Am
- 2002 Pontiac Firebird / Trans Am
Installation Recommendation: To complete your rear suspension upgrade, BMR highly recommends using the heavy-duty replacement hardware kit RH005 (sold separately) to replace the worn, thin factory mounting bolts.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
