QA1 Rear Pro Coil Shock System - MOD Series - 550lb/inch Springs (1997 - 2013 Chevrolet Corvette C5/C6) - RCK52474
Unlock more of your Corvette's handling potential with the QA1 MOD Series Rear Pro Coil Shock System (RCK52474). Engineered for 1997-2013 Chevrolet Corvette C5 and C6 applications, this premium rear coilover conversion replaces the factory transverse leaf spring suspension with adjustable coilover technology. Featuring 550 lb/inch springs and four-way adjustable MOD Series shocks, this system gives performance enthusiasts the ability to fine-tune suspension response, improve cornering control, and achieve a more aggressive stance without sacrificing the flexibility needed for street driving.
QA1 designed its MOD Series shocks for demanding pro touring and track applications that require extensive suspension tuning capability. Modular valve packs allow valving changes without removing the shocks from the vehicle or exposing the shock oil to contamination. Independent high-speed and low-speed compression and rebound adjustments, along with low-speed bleed control, provide exceptional flexibility when dialing in suspension behavior. Nitrogen-charged piggyback canisters deliver consistent performance while fitting within the Corvette's factory suspension geometry.
The RCK52474 also provides adjustable ride height, allowing approximately 1 to 2 inches of lowering on base-model Corvettes and 0.5 to 1.5 inches on Z06 models. Designed to install using factory mounting locations and basic hand tools, this bolt-in conversion makes advanced rear suspension technology accessible to Corvette owners who demand more from their cars.
Features
- Rear Pro Coil Shock System for 1997-2013 Chevrolet Corvette C5 and C6 applications.
- Converts the factory transverse leaf spring rear suspension to coilovers.
- Includes 550 lb/inch springs for street-oriented performance applications.
- QA1 MOD Series shocks feature four-way adjustable damping.
- Independent adjustment of high-speed and low-speed compression and rebound.
- Modular valve packs allow internal valving changes without removing the shocks.
- Valving changes can be performed without exposing shock oil to contamination.
- Low-speed bleed adjustment helps refine weight transfer and suspension response.
- Nitrogen-charged piggyback canisters fit within factory Corvette suspension geometry.
- Ride height adjustment supports improved stance and corner balancing.
- Approximately 1 to 2 inches of lowering available on base models.
- Approximately 0.5 to 1.5 inches of lowering available on Z06 models.
- Uses factory mounting locations for bolt-in installation.
- Does not require a toe link relocation kit.
- Models equipped with electronic ride control require Real Time Damping simulators.
Specifications
- Manufacturer: QA1
- Part Number: RCK52474
- Product Type: Rear Pro Coil Shock System
- Shock Series: MOD Series
- Shock Adjustment: Four-Way Adjustable
- Spring Rate: 550 lb/inch
- Springs Included: Yes
- Vehicle Position: Rear
- Remote Reservoir Configuration: Nitrogen-Charged Piggyback Canisters
- Valving Technology: Modular Valve Packs
- Low-Speed Bleed Adjustment: Yes
- Base Model Lowering Range: Approximately 1 to 2 Inches
- Z06 Lowering Range: Approximately 0.5 to 1.5 Inches
- Installation: Bolt-In Using Factory Mounting Locations
- Toe Link Relocation Kit Required: No
- Vehicle Application: Chevrolet Corvette C5/C6
- Application Years: 1997-2013
Fitment
- 1997 Chevrolet Corvette C5
- 1998 Chevrolet Corvette C5
- 1999 Chevrolet Corvette C5
- 2000 Chevrolet Corvette C5
- 2001 Chevrolet Corvette C5
- 2002 Chevrolet Corvette C5
- 2003 Chevrolet Corvette C5
- 2004 Chevrolet Corvette C5
- 2005 Chevrolet Corvette C6
- 2006 Chevrolet Corvette C6
- 2007 Chevrolet Corvette C6
- 2008 Chevrolet Corvette C6
- 2009 Chevrolet Corvette C6
- 2010 Chevrolet Corvette C6
- 2011 Chevrolet Corvette C6
- 2012 Chevrolet Corvette C6
- 2013 Chevrolet Corvette C6
Fitment Notes: Models equipped with electronic ride control require Real Time Damping simulators. A toe link relocation kit is not required. Lowering ranges vary between base-model and Z06 applications. Verify compatibility with your specific Corvette configuration before installation.
Frequently Asked Questions
What is the difference between QA1 RCK52474 and RCK52475?
Both systems feature four-way adjustable MOD Series shocks for 1997-2013 Chevrolet Corvette applications. RCK52474 includes 550 lb/inch springs, while RCK52475 includes 700 lb/inch springs. QA1 positions the medium-rate spring option toward street-oriented driving, while the firmer spring option is intended for more aggressive track-focused use.
Can the MOD Series shocks be adjusted for both street and track driving?
Yes. QA1's four-way adjustable MOD Series shocks provide independent compression and rebound tuning, allowing drivers to refine suspension response for different driving conditions. Their modular valve packs also support more extensive valving changes without removing the shocks from the vehicle.
Why Buy From Beefcake Racing?
Get more from your Corvette with QA1 suspension upgrades from Beefcake Racing. Whether you're building a capable street car or refining your setup for track days, our team can help you choose the right suspension components. Contact sales@beefcakeracing.com or call 1-855-827-7223 for assistance.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov

