QA1 Rear Pro Coil Shock System - Double Adjustable - 450 lb/inch Springs (1997 - 2013 Corvette C5/C6) - RCK52470
Take greater control of your Corvette's rear suspension with the QA1 Rear Pro Coil Shock System, part number RCK52470. Designed for 1997 - 2013 Chevrolet Corvette C5 and C6 applications, this rear coilover conversion replaces the factory transverse leaf spring arrangement with QA1 Proma Star double adjustable shocks and 450 lb/inch springs. The system delivers the suspension adjustability needed to refine ride height, improve handling response, and create a more balanced performance setup.
QA1's double adjustable Proma Star shocks allow independent compression and rebound tuning, giving you the ability to control how the rear suspension responds to bumps, acceleration, and cornering loads. Whether your Corvette is primarily a street car or occasionally visits the track, adjustable damping makes it possible to fine-tune ride comfort and handling characteristics without being locked into one factory shock setting.
The coilover conversion also gives you more control over ride height and chassis balance. QA1 specifies approximately 1 to 2 inches of lowering on base-model Corvettes and 0.5 to 1.5 inches on Z06 models. Lowering the car's center of gravity can improve handling, while adjustable coilovers make it easier to corner balance the chassis for consistent performance.
RCK52470 includes 450 lb/inch rear coilover springs, providing a defined spring rate for owners looking to upgrade the rear suspension while retaining the flexibility of adjustable damping. QA1 offers other spring configurations for different driving requirements, so matching the rear spring rate to your front suspension and vehicle use is an important part of building a balanced system.
QA1 engineered this kit to install using factory mounting locations with basic hand tools. No toe link relocation kit is required. Corvettes equipped with electronic ride control need Real Time Damping simulators. QA1 serializes and dyno tests its shocks, and the system qualifies for a limited lifetime warranty when registered before installation.
Pair RCK52470 with a compatible QA1 front coilover conversion for comprehensive suspension tuning, or use it to upgrade your existing rear suspension with adjustable ride height, double adjustable damping, and 450 lb/inch springs.
Features
- Rear Pro Coil Shock System for 1997 - 2013 Chevrolet Corvette C5/C6
- Converts factory rear transverse leaf spring suspension to coilovers
- Includes QA1 Proma Star double adjustable coilover shocks
- 450 lb/inch rear coilover springs included
- Independent compression and rebound damping adjustments
- Adjustable rear ride height for stance and handling optimization
- Approximately 1 to 2 inches of lowering on base models
- Approximately 0.5 to 1.5 inches of lowering on Z06 models
- Supports chassis corner balancing
- Designed to improve rear suspension tunability and handling response
- Suitable for street driving and occasional track use
- Uses factory mounting locations
- Installs with basic hand tools
- No toe link relocation kit required
- Serialized and dyno-tested QA1 shocks
- Eligible for QA1 limited lifetime warranty with registration before installation
- Electronic ride control models require Real Time Damping simulators
Specifications
- Manufacturer: QA1
- Part Number: RCK52470
- Product Type: Rear Pro Coil Shock System
- Vehicle Application: Chevrolet Corvette C5/C6
- Model Years: 1997 - 2013
- Suspension Position: Rear
- Shock Series: QA1 Proma Star
- Shock Adjustability: Double Adjustable
- Damping Adjustment: Independent Compression and Rebound
- Spring Rate: 450 lb/inch
- Springs Included: Yes
- Base Model Lowering Range: Approximately 1 to 2 Inches
- Z06 Lowering Range: Approximately 0.5 to 1.5 Inches
- Installation: Factory Mounting Locations
- Toe Link Relocation Kit Required: No
- Electronic Ride Control: Real Time Damping Simulators Required
- Shock Testing: Serialized and Dyno Tested
- Warranty: QA1 Limited Lifetime Warranty, Registration Required
Fitment
- 1997 Chevrolet Corvette C5
- 1998 Chevrolet Corvette C5
- 1999 Chevrolet Corvette C5
- 2000 Chevrolet Corvette C5
- 2001 Chevrolet Corvette C5
- 2002 Chevrolet Corvette C5
- 2003 Chevrolet Corvette C5
- 2004 Chevrolet Corvette C5
- 2005 Chevrolet Corvette C6
- 2006 Chevrolet Corvette C6
- 2007 Chevrolet Corvette C6
- 2008 Chevrolet Corvette C6
- 2009 Chevrolet Corvette C6
- 2010 Chevrolet Corvette C6
- 2011 Chevrolet Corvette C6
- 2012 Chevrolet Corvette C6
- 2013 Chevrolet Corvette C6
Fitment Notes: Verify compatibility with your Corvette's suspension configuration. Models equipped with electronic ride control require Real Time Damping simulators. A toe link relocation kit is not required.
FAQs
What is included in QA1 RCK52470?
The system includes QA1 Proma Star double adjustable rear coilover shocks and 450 lb/inch springs for compatible 1997 - 2013 Chevrolet Corvettes.
Can I adjust the rear ride height and shock damping independently?
Yes. The coilover design allows ride height adjustment, while the double adjustable shocks provide independent compression and rebound tuning.
Why Buy From Beefcake Racing?
Complete your Corvette's suspension upgrade with QA1 performance components from Beefcake Racing. For help selecting matching front coilovers or additional suspension upgrades, email sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov

