QA1 Front Pro Coil Shock System - MOD Series - 700lb/inch Springs (1997 - 2013 Chevrolet Corvette C5 / C6) - MG455-08700
Push your Corvette's handling capabilities further with the QA1 MOD Series Front Pro Coil Shock System (MG455-08700). Designed for 1997 - 2013 Chevrolet Corvette C5 and C6 applications, this advanced front coilover conversion replaces the factory transverse leaf spring suspension with four-way adjustable MOD Series shocks and 700 lb/in springs. Engineered for performance enthusiasts who demand precise suspension control, the system delivers extensive tuning flexibility for aggressive street driving, Pro Touring builds, and track-focused Corvettes.
The MG455-08700 features QA1's modular valve pack technology, allowing shock valving changes without removing the shocks from the car or exposing the shock oil to contamination. Low-speed bleed adjustment provides additional control over weight transfer and suspension response, while nitrogen-charged piggyback reservoirs fit within the factory Corvette suspension geometry. The firmer 700 lb/in springs are geared toward track-oriented applications, helping reduce body roll during hard cornering and delivering a more planted feel. Installation uses factory mounting locations and does not require a toe link relocation kit.
Specifications
- Manufacturer: QA1
- Part Number: MG455-08700
- Product Type: Front Pro Coil Shock System
- Shock Series: QA1 MOD Series
- Vehicle Application: Chevrolet Corvette
- Model Years: 1997 - 2013
- Corvette Generations: C5 and C6
- Suspension Position: Front
- Conversion Type: Factory Transverse Leaf Spring to Coilover
- Shock Valving: MOD Series
- Shock Adjustability: Four-Way Adjustable
- Spring Rate: 700 lb/in
- Springs Included: Yes
- Shock Valve Design: Modular Valve Packs
- Low-Speed Bleed Adjustment: Yes
- Shock Reservoir: Nitrogen-Charged Piggyback Canister
- Ride Height: Adjustable
- Base Model Lowering Range: 1 to 2 Inches
- Z06 Lowering Range: 0.5 to 1.5 Inches
- Mounting Locations: Factory
- Installation: Bolt-In
- Toe Link Relocation Kit Required: No
- Electronic Ride Control Models: Require Real Time Damping Simulators
Features
- MOD Series front coilover conversion for 1997 - 2013 Chevrolet Corvettes
- Replaces the factory transverse leaf spring suspension
- Includes firm 700 lb/in coilover springs
- Four-way adjustable MOD Series shocks provide advanced suspension tuning
- Designed for aggressive performance driving and track-oriented applications
- Firmer spring configuration helps reduce body roll under hard cornering
- Modular valve packs allow valving changes without removing the shocks
- Shock oil system remains sealed during valve pack changes
- Low-speed bleed adjustment helps refine weight transfer and handling response
- Nitrogen-charged piggyback reservoirs fit within factory suspension geometry
- Adjustable ride height helps lower the vehicle's center of gravity
- Supports suspension corner balancing
- Provides 1 to 2 inches of lowering on compatible base-model Corvettes
- Provides 0.5 to 1.5 inches of lowering on compatible Z06 models
- Bolts into factory mounting locations
- No toe link relocation kit required
Four-Way Adjustable MOD Series Technology
The MG455-08700 uses QA1's MOD Series shock technology to provide advanced control over suspension damping. Four-way adjustability allows you to refine the car's response to different driving conditions, making it easier to optimize suspension performance for aggressive cornering while retaining the ability to adjust the system for street use.
700 lb/in Springs for Track-Oriented Performance
The included 700 lb/in springs provide a firmer spring rate than the 550 lb/in springs supplied with the MG455-08550. QA1 identifies its firm spring option as better suited to track-oriented cars, where reducing body roll and maintaining a planted feel during hard cornering are important.
Modular Valve Pack Technology
QA1's modular valve packs allow shock valving changes without removing the shocks from the Corvette. The design also eliminates the need to expose the shock oil to contamination during valve pack changes, making suspension tuning more convenient.
Low-Speed Bleed Adjustment
Low-speed bleed adjustability provides additional control over weight transfer and suspension movement. This allows drivers to refine how the Corvette responds during braking, acceleration, and cornering transitions.
Nitrogen-Charged Piggyback Reservoirs
The nitrogen-charged piggyback reservoirs are designed to deliver consistent performance while fitting within the limited space available around the factory Corvette suspension. This allows advanced shock technology to be incorporated without extensive suspension relocation.
Adjustable Ride Height and Corner Balance
QA1 specifies approximately 1 to 2 inches of lowering for compatible base-model Corvettes and 0.5 to 1.5 inches for compatible Z06 applications. Ride height adjustment can help lower the center of gravity and provides flexibility when corner balancing the vehicle.
Bolt-In Installation
The MG455-08700 uses factory mounting locations and is designed for installation with basic hand tools. A toe link relocation kit is not required. Vehicles equipped with electronic ride control require Real Time Damping simulators.
Fitment
1997 Chevrolet Corvette C5
1998 Chevrolet Corvette C5
1999 Chevrolet Corvette C5
2000 Chevrolet Corvette C5
2001 Chevrolet Corvette C5
2002 Chevrolet Corvette C5
2003 Chevrolet Corvette C5
2004 Chevrolet Corvette C5
2005 Chevrolet Corvette C6
2006 Chevrolet Corvette C6
2007 Chevrolet Corvette C6
2008 Chevrolet Corvette C6
2009 Chevrolet Corvette C6
2010 Chevrolet Corvette C6
2011 Chevrolet Corvette C6
2012 Chevrolet Corvette C6
2013 Chevrolet Corvette C6
Fitment Notes:
- QA1 lists this system for 1997 - 2013 Chevrolet Corvette applications.
- Includes 700 lb/in springs.
- Designed to replace the factory front transverse leaf spring suspension.
- Models equipped with electronic ride control require Real Time Damping simulators.
- A toe link relocation kit is not required.
- Lowering range varies between base-model and Z06 applications.
- Verify the vehicle's suspension configuration before ordering.
Frequently Asked Questions
Is the QA1 MG455-08700 better suited for track use than MG455-08550?
QA1 positions the firmer 700 lb/in spring configuration toward track-oriented applications, where reduced body roll and a more planted feel during hard cornering are priorities. The MG455-08550 includes 550 lb/in springs and is positioned toward vehicles used primarily on the street.
Can the QA1 MG455-08700 be installed without relocating the toe links?
Yes. QA1 specifically states that a toe link relocation kit is not required. The system uses factory mounting locations, although electronic ride control models require Real Time Damping simulators.
Upgrade Your Corvette with Beefcake Racing
Take your Corvette's suspension performance to the next level with QA1 MOD Series components from Beefcake Racing. Whether you're building a serious track car or a high-performance street machine, our team can help you select the right suspension components.
Questions about the QA1 MG455-08700? Email sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov

