The turbos we chose to run on this platform is the same proven On 3 60mm unit we have used since 2011 on the 5.0 Mustangs. These have made over 1000 rear wheel horsepower with upgrades available to step up to 67 or 72mm units. At that point you are talking 1200+rwhp potential. We decided to only supply our ceramic ball bearing units with this turbo system. This is a premium upgrade for most of our systems. From the turbos back, we designed the kit to have 3.0in dual 304ss downpipes. Each connection is v-banded and we supply stainless v-band clamps to secure tubing into place.
Kit Contents:
On 3 Performance 60mm Ceramic Ball Bearing Turbochargers (2pcs)
On 3 Performance Custom Stainless V-Band Inlet/Outlet Exhaust Housings
On 3 Performance Stainless Turbo V-Band Inlet Clamps (2pcs)
On 3 Performance 44mm V-band Wastegates (2pcs)
On 3 Performance 50mm Blow Off Valve
On 3 Performance Custom Oil Feed Lines / Drain Kit
On 3 Performance Custom Cone Filters
On 3 Performance Aluminum Fabricated Coolant Tank
Hardware Kit
Instruction CD w/ Photos
On 3 Performance Driver and Passenger Side Premium Cast Stainless Steel Turbo 304 Manifold Design
On 3 Performance 3.0” Stainless Downpipes (Welded for o2 sensor and wideband)
V-band Clamps For Each Exhaust Connection
Driver side Tubing From Turbo To Intercooler
Passenger side Tubing From Turbo To Intercooler
On 3 Performance 5 ply Custom Silicone Coupler Kit
Complete Stainless T-bolt Clamps Kit For Couplers
On 3 Performance Twin Turbo Custom Air to Air Intercooler
Custom Fabricated Tig Welded Intercooler Bracket Kit
Custom Welded 50mm Blow Off Valve Flange On Intercooler End Tank
A strong stainless steel housing and custom V-Band inlet for leak proof seal. To go the extra mile, we supply nothing but stainless t-bolt clamps to keep all couplers in place. As far as the couplers go, they are all made from a 5 ply silicone and withstand anything you throw at it. Coming out of the intercooler, we designed the it from 3.0in tubing which transitions to 3.5. This allows us to run the stock mass air meter successfully without any issues of pegging on almost any application. This saves you around $300 from having to upgrade your mass air meter! To eliminate compressor surge, we have used one of our On 3 Performance 50mm blow off valves. Your intercooler is pre-welded with the correct blow off valve flange so this is a simple and quick bolt on.
This is a large, 3.5in air to air core with integrated blow off valve flange into the core. It is a dual 2.5? inlet and single 3.0? outlet. We designed the cold side from 2.5? aluminum tubing from the turbochargers to the intercooler. All tubing is bead rolled to help keep the couplers secured under high boost applications. To go the extra mile, we supply nothing but stainless t-bolt clamps to keep all couplers in place. As far as the couplers go, they are all made from a 5 ply silicone and withstand anything you throw at it. Coming out of the intercooler, we designed the it from 3.0? tubing which transitions to 3.5. This allows us to run the stock mass air meter successfully without any issues of pegging on almost any application. This saves you around $300 from having to upgrade your mass air meter! To eliminate compressor surge, we have used one of our On 3 Performance 50mm blow off valves. Your intercooler is pre-welded with the correct blow off valve flange so this is a simple and quick bolt on.
Tuning Options:
1)The Start-up package is nothing more and nothing less, we get the info from you on your setup and create a startup file that will get your car up and running. THIS IS NOT A WIDE OPEN THROTTLE SAFE TUNE. This is a tune so you can get the car running, up to temperature and part throttle around town. This will come with an SCT Xcal 4 handheld.
2)The Full Tune with logging support is going to get you the above but also full tuning support. In most cases, you will need the car on the dyno so you can remotely work with our tuning partner Sai Li as he reviews, data-logs, and provides you tune update/revisions. He will work with you to review logs in the future to keep the car dialed in if needed.
Beefcake Racing is an Authorized Dealer for On 3 Performance, call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
