JMS Plug and Play Mass Air Wiring Harness -- 1986-1995 Mustang to 2005+ slot-style mass air flow sensor.
No splicing required, plug and play design, uses OEM-style connectors, additional pins for use with IAT, 4-pin oval to 6-pin slot-style
The JMS Plug and Play Mass Air Wiring Harness is designed to convert the 1986-1995 Mustang to use a 2005 and newer Mustang slot-style mass air flow sensor. The harness has the standard OEM 4-pin connector that is used on 1986-1995 Mustangs at one end, and the standard 6-pin connector used on the 2005 and newer Mustang at the opposite end. You can also use the IAT (inlet air temp) sensor built-in to the OEM slot-style sensor by accessing the 2 additional open/un-used pins on the 6-pin connector side for output to gauge/monitor.
No splicing required, plug and play design, uses OEM-style connectors, additional pins for use with IAT, 4-pin oval to 6-pin slot-style
The JMS Plug and Play Mass Air Wiring Harness is designed to convert the 1986-1995 Mustang to use a 2005 and newer Mustang slot-style mass air flow sensor. The harness has the standard OEM 4-pin connector that is used on 1986-1995 Mustangs at one end, and the standard 6-pin connector used on the 2005 and newer Mustang at the opposite end. You can also use the IAT (inlet air temp) sensor built-in to the OEM slot-style sensor by accessing the 2 additional open/un-used pins on the 6-pin connector side for output to gauge/monitor.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
