Halltech Systems C6 Venom II Intake with Beehive Heat Shield - S&B Gray Oiled High Flow TRAK Filter - No NOMEX Sleeve (2005 - 2007 Chevrolet Corvette C6 with 6.0L LS2) - V2026
Open up the intake side of your LS2-powered C6 with the Halltech Systems C6 Venom II Intake V2026. Designed as a direct replacement for the factory 2005 - 2007 Corvette LS2 intake box, the Venom II combines Halltech's larger 106.7 mm inlet, built-in velocity stack, S&B Gray Oiled High Flow TRAK Filter, HC.125 honeycomb flow straightener, and Beehive heat shield into one complete induction package. Halltech reports gains of 15 RWHP and 12 lb-ft of torque from the Venom II, giving LS2 owners a proven bolt-on airflow upgrade without requiring a tune.
This configuration pairs the Venom II with Halltech's S&B Gray Oiled High-Flow Track Filter option. Halltech states that the large filter used with the system can flow more than 1,250 CFM and provide enough airflow to feed more than 900 HP. The Venom II retains the stock C6 LS2 MAF sensor and factory wiring, includes Halltech's HC.125 honeycomb flow straightener, and requires no tuning. This specific configuration does not include the optional NOMEX sleeve.
Specifications
- Manufacturer: Halltech Systems
- Part Number: V2026
- Product: C6 Venom II Intake
- Vehicle Application: 2005 - 2007 Chevrolet Corvette C6
- Engine: 6.0L LS2
- Inlet Size: 106.7 mm
- Inlet Design: Built-in velocity stack
- Filter: S&B Gray Oiled High-Flow Track Filter
- Filter Airflow Capability: More than 1,250 CFM per Halltech
- Filter Horsepower Support: More than 900 HP per Halltech
- Heat Shield: Halltech Beehive included
- Flow Straightener: Halltech HC.125 honeycomb flow straightener included
- MAF Sensor: Uses stock MAF sensor; MAF sensor not included
- Wiring: Uses stock wiring
- Tuning Requirement: No tuning required
- Halltech-Reported Performance Gain: 15 RWHP and 12 lb-ft of torque
- NOMEX Sleeve: Not included with this configuration
Features
- Direct replacement for the factory 2005 - 2007 C6 LS2 intake box
- Halltech-reported gain of 15 RWHP and 12 lb-ft of torque
- Larger 106.7 mm inlet
- Built-in velocity stack
- S&B Gray Oiled High-Flow Track Filter
- Filter capable of flowing more than 1,250 CFM according to Halltech
- Halltech states the filter can feed more than 900 HP
- Halltech Beehive heat shield included
- HC.125 honeycomb flow straightener included
- Uses the factory C6 LS2 MAF sensor
- Uses the stock wiring
- No tuning required
- No NOMEX sleeve included with this configuration
- No radiator-shroud cutting required or recommended by Halltech
106.7 mm Inlet with Built-In Velocity Stack
The Venom II replaces the factory LS2 intake box with Halltech's larger 106.7 mm inlet and built-in velocity stack design. Rather than simply changing the filter element, V2026 upgrades the intake tract while retaining compatibility with the stock C6 LS2 MAF sensor and factory wiring. The result is a complete Halltech induction package engineered specifically for the 2005 - 2007 LS2 Corvette.
Halltech-Reported 15 RWHP and 12 lb-ft Gain
Halltech reports a bolt-on gain of 15 RWHP and 12 lb-ft of torque with the C6 Venom II. Halltech also states that the Venom II uses the same mold as its Killer Bee II design, which produced gains of 15 HP and 14 lb-ft on the Katech Engine Development Superflow dyno. Actual results can vary depending on vehicle condition, modifications, testing conditions, and other variables.
S&B Gray Oiled High-Flow Track Filter
This V2026 configuration uses Halltech's S&B Gray Oiled High-Flow Track Filter option. It is the gray oiled track-filter choice within Halltech's available Venom II filter configurations. Halltech states that the large filter used with the system can flow more than 1,250 CFM and provide enough airflow to feed more than 900 HP, giving the Venom II substantial airflow capacity for performance-oriented LS2 combinations.
Beehive Heat Shield Included
The Halltech Beehive heat shield is included as part of the C6 Venom II package. It is supplied with V2026 rather than requiring a separate purchase, giving you Halltech's intended intake and heat-shield combination in one package.
HC.125 Honeycomb Flow Straightener Included
Halltech includes its HC.125 honeycomb flow straightener with the Venom II. The system is engineered to operate with the factory C6 LS2 MAF sensor and stock wiring. The MAF sensor itself is not included with V2026 and is reused from the vehicle.
No Tune Required
Halltech specifies that the C6 Venom II requires no tuning. Even with its larger 106.7 mm inlet and increased airflow capability, V2026 is designed to retain the stock wiring and factory MAF sensor. That makes it a straightforward bolt-on induction upgrade for the 2005 - 2007 C6 LS2 without requiring an intake-specific calibration.
No Radiator-Shroud Cutting Required
Halltech specifically recommends against cutting holes in the Corvette's radiator shroud to direct additional air toward the filter. According to Halltech, cutting the shroud is unnecessary and can cause lean codes and surging. Install the Venom II in Halltech's intended configuration rather than modifying the radiator shroud for additional airflow.
No NOMEX Sleeve Included
This V2026 configuration does not include Halltech's optional NOMEX sleeve. Halltech offers the sleeve as a selectable option when configuring the Venom II. This listing is specifically for the S&B Gray Oiled High-Flow Track Filter version without the NOMEX sleeve.
Fitment
- 2005 Chevrolet Corvette C6 with 6.0L LS2
- 2006 Chevrolet Corvette C6 with 6.0L LS2
- 2007 Chevrolet Corvette C6 with 6.0L LS2
Fitment Note: Halltech V2026 is specifically listed by the manufacturer for the 2005 - 2007 Chevrolet Corvette C6 equipped with the 6.0L LS2 engine.
FAQs
Does the Halltech C6 Venom II V2026 require tuning?
No. Halltech specifically states that no tuning is required. The Venom II uses the stock wiring and factory MAF sensor, although the MAF sensor itself is not included with the intake.
What filter is included with this Halltech V2026 configuration?
This version includes Halltech's S&B Gray Oiled High-Flow Track Filter option. It also includes the Halltech Beehive heat shield and HC.125 honeycomb flow straightener. The optional NOMEX sleeve is not included with this configuration.
Get Your Halltech C6 Venom II from Beefcake Racing
Upgrade your 2005 - 2007 LS2 Corvette with the Halltech C6 Venom II V2026 from Beefcake Racing. This configuration combines Halltech's 106.7 mm inlet and built-in velocity stack with the S&B Gray Oiled High-Flow Track Filter, Beehive heat shield, and HC.125 flow straightener for a complete bolt-on intake package with no tuning required. For help with fitment or ordering, contact Beefcake Racing at sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
