Halltech Systems C6 Venom II Intake with Beehive Heat Shield - S&B Gray Oiled High Flow TRAK Filter - NOMEX Sleeve (2005 - 2007 Chevrolet Corvette C6 with 6.0L LS2) - V2026
Uncork the intake side of your LS2-powered C6 with the Halltech Systems C6 Venom II Intake V2026. Engineered as a direct replacement for the stock 2005 - 2007 Corvette LS2 intake box, the Venom II combines Halltech's larger 106.7 mm inlet, built-in velocity stack, S&B Gray Oiled High-Flow Track Filter, HC.125 honeycomb flow straightener, Beehive heat shield, and optional NOMEX sleeve into one complete induction package. Halltech reports gains of 15 RWHP and 12 lb-ft of torque from the Venom II design, giving LS2 owners a serious bolt-on airflow upgrade without requiring an intake-specific tune.
This configuration pairs the Venom II with Halltech's S&B Gray Oiled High-Flow Track Filter and NOMEX sleeve. Halltech states that the large filter used with the system can flow more than 1,250 CFM and feed more than 900 HP. The Venom II retains the factory C6 LS2 wiring and stock MAF sensor, includes Halltech's HC.125 honeycomb flow straightener, and requires no tuning. For enthusiasts looking for the gray oiled track-filter configuration with the optional NOMEX sleeve, this V2026 packages those choices with the complete Venom II system.
Specifications
- Manufacturer: Halltech Systems
- Part Number: V2026
- Product: C6 Venom II Intake
- Vehicle Application: 2005 - 2007 Chevrolet Corvette C6
- Engine: 6.0L LS2
- Inlet Size: 106.7 mm
- Inlet Design: Built-in velocity stack
- Filter: S&B Gray Oiled High-Flow Track Filter
- Filter Airflow Capability: More than 1,250 CFM per Halltech
- Filter Horsepower Support: More than 900 HP per Halltech
- Heat Shield: Halltech Beehive included
- Flow Straightener: Halltech HC.125 honeycomb flow straightener included
- MAF Sensor: Uses stock MAF sensor; MAF sensor not included
- Wiring: Uses stock wiring
- Tuning Requirement: No tuning required
- Halltech-Reported Performance Gain: 15 RWHP and 12 lb-ft of torque
- NOMEX Sleeve: Included with this configuration
Features
- Direct replacement for the factory 2005 - 2007 C6 LS2 intake box
- Halltech-reported gain of 15 RWHP and 12 lb-ft of torque
- Larger 106.7 mm inlet
- Built-in velocity stack
- S&B Gray Oiled High-Flow Track Filter
- Halltech NOMEX sleeve included with this configuration
- Filter capable of flowing more than 1,250 CFM according to Halltech
- Halltech states the filter can feed more than 900 HP
- Halltech Beehive heat shield included
- HC.125 honeycomb flow straightener included
- Uses the factory C6 LS2 MAF sensor
- Uses the stock wiring
- No tuning required
- No radiator-shroud cutting required or recommended by Halltech
106.7 mm Inlet with Built-In Velocity Stack
The Venom II replaces the factory LS2 intake box with Halltech's larger 106.7 mm inlet and built-in velocity stack. Rather than simply changing the filter element, V2026 upgrades the complete intake-box configuration while retaining compatibility with the stock C6 LS2 MAF sensor and factory wiring. It is a purpose-built Halltech induction package for the 2005 - 2007 LS2 Corvette.
Halltech-Reported 15 RWHP and 12 lb-ft Gain
Halltech reports a bolt-on gain of 15 RWHP and 12 lb-ft of torque from the C6 Venom II. Halltech also states that the Venom II is made from the same mold as its Killer Bee II design, which produced gains of 15 HP and 14 lb-ft on the Katech Engine Development Superflow dyno. Actual results can vary depending on vehicle condition, modifications, testing conditions, and other variables.
S&B Gray Oiled High-Flow Track Filter
This V2026 configuration uses Halltech's S&B Gray Oiled High-Flow Track Filter option. It is the gray oiled track-filter choice among the four filter configurations Halltech currently offers for the Venom II. Halltech states that the large filter used with this system can flow more than 1,250 CFM and feed more than 900 HP, providing substantial airflow capacity for performance-oriented LS2 combinations.
Beehive Heat Shield Included
The Halltech Beehive heat shield is included with the C6 Venom II. It is part of the current V2026 package rather than an additional component that must be purchased separately, giving you Halltech's intended intake and heat-shield combination in one package.
HC.125 Honeycomb Flow Straightener Included
Halltech also includes its HC.125 honeycomb flow straightener with V2026. The Venom II is designed to retain the factory C6 LS2 MAF sensor and stock wiring for direct installation. The factory MAF sensor itself is not supplied with the intake and is reused from the vehicle.
NOMEX Sleeve Included
This specific V2026 configuration includes Halltech's optional NOMEX sleeve. Halltech provides the NOMEX sleeve as a selectable option when ordering the Venom II, and this listing combines the sleeve with the S&B Gray Oiled High-Flow Track Filter configuration.
No Tune Required
Halltech specifies that no tuning is required for the C6 Venom II. Despite the larger 106.7 mm inlet and increased airflow capability, the system is engineered to operate with the stock wiring and factory MAF sensor. That makes V2026 a straightforward bolt-on performance upgrade for the 2005 - 2007 LS2 Corvette without requiring an intake-specific calibration.
No Radiator-Shroud Cutting Required
Halltech specifically recommends against cutting holes in the Corvette's radiator shroud in an attempt to direct additional air toward the filter. According to Halltech, this modification is unnecessary and can cause lean codes and surging. The Venom II should be installed using Halltech's intended configuration rather than modifying the radiator shroud.
Fitment
- 2005 Chevrolet Corvette C6 with 6.0L LS2
- 2006 Chevrolet Corvette C6 with 6.0L LS2
- 2007 Chevrolet Corvette C6 with 6.0L LS2
Fitment Note: Halltech V2026 is specifically listed by the manufacturer for the 2005 - 2007 Chevrolet Corvette C6 equipped with the 6.0L LS2 engine.
FAQs
Does the Halltech C6 Venom II V2026 require tuning?
No. Halltech specifically states that no tuning is required. The Venom II uses the stock wiring and factory MAF sensor, although the MAF sensor itself is not included with the intake.
What is included with this Halltech V2026 configuration?
This version includes the C6 Venom II intake, S&B Gray Oiled High-Flow Track Filter, Halltech Beehive heat shield, HC.125 honeycomb flow straightener, and the optional NOMEX sleeve. The factory MAF sensor is reused and is not included.
Get Your Halltech C6 Venom II from Beefcake Racing
Upgrade your 2005 - 2007 LS2 Corvette with the Halltech C6 Venom II V2026 from Beefcake Racing. This configuration combines Halltech's 106.7 mm inlet and built-in velocity stack with the S&B Gray Oiled High-Flow Track Filter, Beehive heat shield, HC.125 flow straightener, and NOMEX sleeve for a complete bolt-on intake package with no tuning required. For help with fitment or ordering, contact Beefcake Racing at sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
