Halltech Systems C6 Venom II Intake with Beehive Heat Shield - TKO Attack Blue Dry Nano Filter - NOMEX Sleeve (2005 - 2007 Chevrolet Corvette C6 with 6.0L LS2) - V2026
Give your LS2-powered C6 a serious bolt-on induction upgrade with the Halltech Systems C6 Venom II Intake V2026. Engineered as a direct replacement for the stock 2005 - 2007 Corvette LS2 intake box, the Venom II combines Halltech's larger 106.7 mm inlet, built-in velocity stack, TKO Attack Blue Dry Nano Filter, HC.125 honeycomb flow straightener, Beehive heat shield, and optional NOMEX sleeve into one complete intake package. Halltech reports gains of 15 RWHP and 12 lb-ft of torque from the Venom II design, delivering increased airflow and performance without requiring an intake-specific tune.
This configuration pairs the Venom II with Halltech's TKO Attack Blue Dry Nano Filter and NOMEX sleeve. Halltech states that the large filter used with the system can flow more than 1,250 CFM and feed more than 900 HP. The intake retains the factory C6 LS2 wiring and stock MAF sensor, includes Halltech's HC.125 honeycomb flow straightener, and requires no tuning. For enthusiasts looking for the TKO dry nano filter configuration with the optional NOMEX sleeve, this V2026 combines those choices with Halltech's complete Venom II intake system.
Specifications
- Manufacturer: Halltech Systems
- Part Number: V2026
- Product: C6 Venom II Intake
- Vehicle Application: 2005 - 2007 Chevrolet Corvette C6
- Engine: 6.0L LS2
- Inlet Size: 106.7 mm
- Inlet Design: Built-in velocity stack
- Filter: TKO Attack Blue Dry Nano Filter
- Filter Airflow Capability: More than 1,250 CFM per Halltech
- Filter Horsepower Support: More than 900 HP per Halltech
- Heat Shield: Halltech Beehive included
- Flow Straightener: Halltech HC.125 honeycomb flow straightener included
- MAF Sensor: Uses stock MAF sensor; MAF sensor not included
- Wiring: Uses stock wiring
- Tuning Requirement: No tuning required
- Halltech-Reported Performance Gain: 15 RWHP and 12 lb-ft of torque
- NOMEX Sleeve: Included with this configuration
Features
- Direct replacement for the factory 2005 - 2007 C6 LS2 intake box
- Halltech-reported gain of 15 RWHP and 12 lb-ft of torque
- Larger 106.7 mm inlet
- Built-in velocity stack
- TKO Attack Blue Dry Nano Filter
- Dry-filter configuration
- Halltech NOMEX sleeve included with this configuration
- Filter capable of flowing more than 1,250 CFM according to Halltech
- Halltech states the filter can feed more than 900 HP
- Halltech Beehive heat shield included
- HC.125 honeycomb flow straightener included
- Uses the factory C6 LS2 MAF sensor
- Uses the stock wiring
- No tuning required
- No radiator-shroud cutting required or recommended by Halltech
106.7 mm Inlet with Built-In Velocity Stack
The Venom II replaces the stock LS2 intake box with Halltech's larger 106.7 mm inlet and built-in velocity stack. Instead of simply changing the filter element, V2026 upgrades the intake-box configuration with an integrated Halltech system designed to increase airflow while retaining compatibility with the factory C6 LS2 MAF sensor and stock wiring.
Halltech-Reported 15 RWHP and 12 lb-ft Gain
Halltech reports a bolt-on gain of 15 RWHP and 12 lb-ft of torque from the C6 Venom II. Halltech also states that the Venom II uses the same mold as its Killer Bee II design, which produced gains of 15 HP and 14 lb-ft on the Katech Engine Development Superflow dyno. Actual results can vary depending on vehicle condition, modifications, testing conditions, and other variables.
TKO Attack Blue Dry Nano Filter
This V2026 configuration uses Halltech's TKO Attack Blue Dry Nano Filter, one of four filter options offered by Halltech for the Venom II. It provides a dry-filter choice while retaining the large filter sizing and airflow capability of the Venom II system. Halltech states that the filter can flow more than 1,250 CFM and provide enough airflow to feed more than 900 HP.
Beehive Heat Shield Included
Halltech includes its Beehive heat shield with the C6 Venom II. The Beehive is part of the V2026 package rather than an additional component that must be purchased separately, giving you Halltech's intended intake and heat-shield combination in one package.
HC.125 Honeycomb Flow Straightener Included
The Venom II also includes Halltech's HC.125 honeycomb flow straightener. The system is designed to operate with the factory C6 LS2 MAF sensor and stock wiring for direct installation. The factory MAF sensor itself is not supplied with V2026 and is reused from the vehicle.
NOMEX Sleeve Included
This specific V2026 configuration includes Halltech's optional NOMEX sleeve. Halltech provides the NOMEX sleeve as a selectable option when ordering the C6 Venom II, and this listing combines that sleeve option with the TKO Attack Blue Dry Nano Filter configuration.
No Tune Required
Halltech specifies that no tuning is required for the C6 Venom II. Despite the larger 106.7 mm inlet and increased airflow capability, V2026 is engineered to operate with the stock wiring and factory MAF sensor. That makes it a straightforward bolt-on performance upgrade for the 2005 - 2007 C6 LS2 without requiring an intake-specific calibration.
No Radiator-Shroud Cutting Required
Halltech specifically recommends against cutting holes in the Corvette's radiator shroud in an attempt to direct additional air toward the filter. According to Halltech, this modification is unnecessary and can cause lean codes and surging. The Venom II should be installed using Halltech's intended configuration rather than modifying the radiator shroud.
Fitment
- 2005 Chevrolet Corvette C6 with 6.0L LS2
- 2006 Chevrolet Corvette C6 with 6.0L LS2
- 2007 Chevrolet Corvette C6 with 6.0L LS2
Fitment Note: Halltech V2026 is specifically listed by the manufacturer for the 2005 - 2007 Chevrolet Corvette C6 equipped with the 6.0L LS2 engine.
FAQs
Does the Halltech C6 Venom II V2026 require tuning?
No. Halltech specifically states that no tuning is required. The Venom II uses the stock wiring and factory MAF sensor, although the MAF sensor itself is not included with the intake.
What is included with this Halltech V2026 configuration?
This version includes the C6 Venom II intake, TKO Attack Blue Dry Nano Filter, Halltech Beehive heat shield, HC.125 honeycomb flow straightener, and the optional NOMEX sleeve. The factory MAF sensor is reused and is not included.
Get Your Halltech C6 Venom II from Beefcake Racing
Upgrade your 2005 - 2007 LS2 Corvette with the Halltech C6 Venom II V2026 from Beefcake Racing. This configuration combines Halltech's 106.7 mm inlet and built-in velocity stack with the TKO Attack Blue Dry Nano Filter, Beehive heat shield, HC.125 flow straightener, and NOMEX sleeve for a complete bolt-on intake package with no tuning required. For help with fitment or ordering, contact Beefcake Racing at sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
