Halltech Systems Venom F-Seal Coupler Kit - No Straightener (1997 - 2004 Chevrolet Corvette C5 / 2005 - 2007 C6 LS2 with Halltech Venom Intake and Delphi MAF) - V-FSEAL
Refresh the connection between your Halltech Venom intake bridge and Delphi MAF with the Halltech Systems Venom F-Seal Coupler Kit V-FSEAL. Designed specifically for the Venom intake system, the F-Seal gasket provides the coupling interface between the Halltech Venom bridge and the Delphi mass air flow sensor, making it the correct replacement component when servicing this connection on a compatible C5 or 2005-2007 C6 LS2 Halltech Venom setup.
This V-FSEAL configuration does not include Halltech's optional flow straightener, making it the right choice when you need the F-Seal coupler itself and do not need to add or replace the straightener. Instead of trying to substitute a generic coupler at a purpose-specific interface, the Halltech F-Seal gives you the component designed for the Venom bridge-to-Delphi-MAF connection.
Specifications
- Manufacturer: Halltech Systems
- Part Number: V-FSEAL
- Product: Venom F-Seal Coupler Kit
- Component Type: F-Seal gasket / coupler
- Intake Compatibility: Halltech Venom intake systems using the applicable Delphi MAF
- Connection: Couples the Halltech Venom intake bridge to the Delphi MAF unit
- Flow Straightener: Not included with this configuration
- C5 Application: 1997 - 2004 Chevrolet Corvette C5 with applicable Halltech Venom intake and Delphi MAF
- C6 Application: 2005 - 2007 Chevrolet Corvette C6 LS2 with Halltech Venom intake and Delphi MAF
Features
- Replacement F-Seal coupler for compatible Halltech Venom intake systems
- Designed for the interface between the Venom intake bridge and Delphi MAF unit
- Useful when replacing or refreshing the existing F-Seal during intake service
- Application-specific Halltech component rather than a generic intake coupler
- Supports retention of the Halltech Venom bridge and compatible Delphi MAF configuration
- No flow straightener included with this configuration
- Halltech Systems part number V-FSEAL
Couples the Venom Intake Bridge to the Delphi MAF
The V-FSEAL has one specific job within the Halltech Venom intake assembly: coupling the Venom intake bridge to the Delphi MAF unit. That makes it an important interface component when servicing an existing Venom system. If the original F-Seal needs replacement or the intake has been disassembled and the coupling component needs to be refreshed, V-FSEAL provides the Halltech part intended for this connection.
Designed for Halltech Venom Intake Systems
The F-Seal is not being sold as a universal intake coupler. Halltech identifies it specifically as the gasket that couples its Venom intake bridge to the Delphi MAF. That distinction matters when ordering replacement intake hardware because the vehicle alone does not determine compatibility. The Corvette must have the applicable Halltech Venom intake and Delphi MAF configuration for this F-Seal to serve its intended purpose.
No Flow Straightener Included
This V-FSEAL configuration is for the Venom F-Seal Coupler Kit without a flow straightener. Halltech offers a flow straightener option with the V-FSEAL product, but it is not included here. This version is intended for owners who need the F-Seal connection component without adding another flow straightener to the order.
Replace the Connection Component You Actually Need
When the rest of the Venom intake and Delphi MAF setup is already in place, replacing an individual connection component can make more sense than purchasing unrelated intake hardware. V-FSEAL lets you address the bridge-to-MAF coupling directly, making it useful during maintenance, reassembly, or replacement of an existing F-Seal on a compatible Halltech Venom system.
Fitment
- 1997 Chevrolet Corvette C5
- 1998 Chevrolet Corvette C5
- 1999 Chevrolet Corvette C5
- 2000 Chevrolet Corvette C5
- 2001 Chevrolet Corvette C5
- 2002 Chevrolet Corvette C5
- 2003 Chevrolet Corvette C5
- 2004 Chevrolet Corvette C5
- 2005 Chevrolet Corvette C6 LS2
- 2006 Chevrolet Corvette C6 LS2
- 2007 Chevrolet Corvette C6 LS2
Fitment Note: Vehicle year alone does not determine compatibility. V-FSEAL is intended for the applicable Halltech Venom intake configuration using a Delphi MAF. Verify that your Corvette has the compatible Halltech Venom bridge and Delphi MAF before ordering.
FAQs
What does the Halltech V-FSEAL do?
The V-FSEAL is the F-Seal gasket used to couple the Halltech Venom intake bridge to the Delphi MAF unit. It is a replacement connection component for compatible Halltech Venom intake configurations.
Does this V-FSEAL configuration include the Halltech flow straightener?
No. This configuration includes the Venom F-Seal Coupler Kit without the optional flow straightener. It is intended for applications where the F-Seal itself is needed and a flow straightener does not need to be added to the order.
Get Your Halltech Venom F-Seal Coupler Kit from Beefcake Racing
Refresh the bridge-to-MAF connection on your compatible Halltech Venom intake with the V-FSEAL Coupler Kit from Beefcake Racing. If you need help confirming your Halltech Venom intake or Delphi MAF configuration before ordering, contact us at sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
