Halltech Systems Stinger-RZ Cold Air Intake System - S&B Gray Oiled High-Flow TRACK Filter - No NOMEX Sleeve - Stock Throttle Body - PCV Hole in T/B Hose (2015 - 2019 Chevrolet Corvette C7 Z06) - STRZ06
Open up the induction side of your supercharged LT4 with the Halltech Systems Stinger-RZ Cold Air Intake System. Engineered for the 2015-2019 Chevrolet Corvette C7 Z06, the STRZ06 combines Halltech's CAD-developed intake design with a substantially larger sealed airbox and high-flow induction path designed to reduce the restriction of the factory intake. Halltech reports that at least 20 independent shops, including GM dealerships, have chassis-dyno tested the Stinger-RZ and recorded gains ranging from 40 to 55 rear-wheel horsepower.
This specific STRZ06 configuration is equipped with the S&B Gray Oiled High-Flow TRACK Filter, stock throttle-body setup, and PCV hole in the throttle-body hose. The optional NOMEX sleeve is not included. The Gray TRACK filter is Halltech's oiled high-flow track filter choice, making this configuration aimed squarely at enthusiasts who prioritize maximum-flow performance while retaining the factory throttle body.
Specifications
- Manufacturer: Halltech Systems
- Part Number: STRZ06
- Product: Stinger-RZ Cold Air Intake System
- Vehicle: Chevrolet Corvette C7 Z06
- Model Years: 2015-2019
- Engine: 6.2L Supercharged LT4
- Filter Option: S&B Gray Oiled High-Flow TRACK Filter
- Filter Media: Oiled
- Filter Configuration: High-Flow TRACK
- Throttle Body Configuration: Stock throttle body
- Throttle-Body Hose: PCV hole included
- NOMEX Sleeve: Not included with this configuration
- Airbox: Sealed, larger-than-stock design
- Intake Development: CAD developed
- Reported Independent Dyno Gains: 40-55 RWHP
- Halltech Published Test Result: 51.6 RWHP
- Reported Quarter-Mile Improvement: 0.41 second ET and 6 mph
- Shipping Box Dimensions: 22 inches x 15 inches x 12 inches when shipped alone
- Shipping Box Weight: 9 pounds when shipped alone
- California Emissions Status: No California Executive Order number
Features
- Designed for the 2015-2019 Chevrolet Corvette C7 Z06 with the supercharged LT4 engine
- CAD-developed Stinger-RZ cold air intake system
- S&B Gray Oiled High-Flow TRACK Filter included with this configuration
- Configured for the stock C7 Z06 throttle body
- PCV hole included in the throttle-body hose
- No NOMEX sleeve included with this configuration
- Larger sealed airbox designed to promote improved airflow
- Designed to reduce airflow restriction from the factory filter and intake system
- Halltech reports independent chassis-dyno gains ranging from 40 to 55 RWHP
- Halltech publishes a 51.6 RWHP test result for the Stinger-RZ
- Halltech reports a 0.41-second quarter-mile ET improvement and 6 mph increase
- Compatible with Halltech's TRIC Ram Air package without requiring changes to the Stinger-RZ intake system
- Available with multiple dry and oiled filter choices
- Professional installation is strongly recommended by Halltech
- F-panel seal referenced in the installation video is no longer required or supplied with the kit
Proven Stinger-RZ Performance
The Stinger-RZ is designed to attack airflow restriction ahead of the C7 Z06's supercharged LT4. Halltech states that at least 20 independent shops, including GM dealerships, have chassis-dyno tested the intake and reported gains ranging from 40 to 55 RWHP. Halltech also publishes a 51.6 RWHP result and reports a quarter-mile improvement of 0.41 second and 6 mph. Actual results can vary based on vehicle condition, modifications, calibration, fuel, atmospheric conditions, and testing procedures.
S&B Gray Oiled High-Flow TRACK Filter
This configuration uses the S&B Gray Oiled High-Flow TRACK Filter. Halltech identifies the Gray filter as its oiled high-flow track option, separating it from the S&B Red Oiled, S&B Blue Dry, and TKO Attack Blue Dry Nano alternatives. Halltech's proprietary C7 Stinger replacement filter design is made specifically for Halltech Stinger intake systems and uses a tapered shape with 70 pleats around the perimeter to maximize filtered surface area.
Stock Throttle Body with PCV Provision
This STRZ06 is configured for the stock C7 Z06 throttle body and includes the PCV hole in the throttle-body hose. Halltech offers selectable throttle-body and PCV-hole configurations, so choosing the version that matches the vehicle's induction and PCV setup is important when ordering.
Larger Sealed Airbox
The Stinger-RZ uses a sealed airbox that Halltech describes as much larger than the factory unit to promote better airflow. The larger design requires repositioning some engine-bay components and making minor modifications during installation. Halltech regularly audits filter-box fitment against a spare F-panel and strongly recommends professional installation to ensure everything is positioned correctly.
TRIC Ram Air Compatible
The Stinger-RZ is designed to accept Halltech's TRIC Ram Air package later without requiring changes to the Stinger-RZ intake system. That allows C7 Z06 owners to install the cold air intake first and expand the induction system with the compatible TRIC package in the future.
Emissions Notice
Halltech states that the STRZ06 does not have a California Executive Order number and is not legal for sale in California for use on emissions-controlled vehicles except where legally permitted for qualifying off-road applications such as track racing. Check applicable state and local emissions requirements before ordering or installing this intake.
Fitment
- 2015 Chevrolet Corvette C7 Z06 6.2L Supercharged LT4 with stock throttle body
- 2016 Chevrolet Corvette C7 Z06 6.2L Supercharged LT4 with stock throttle body
- 2017 Chevrolet Corvette C7 Z06 6.2L Supercharged LT4 with stock throttle body
- 2018 Chevrolet Corvette C7 Z06 6.2L Supercharged LT4 with stock throttle body
- 2019 Chevrolet Corvette C7 Z06 6.2L Supercharged LT4 with stock throttle body
FAQs
What makes the S&B Gray TRACK Filter different from the other STRZ06 filter options?
Halltech identifies the S&B Gray filter as its Oiled High-Flow Track Filter. Other available STRZ06 choices include the S&B Red Oiled Filter, S&B Blue Dry Filter, and TKO Attack Blue Dry Nano Filter.
What configuration is included with this STRZ06?
This version includes the S&B Gray Oiled High-Flow TRACK Filter and is configured for the stock throttle body with a PCV hole in the throttle-body hose. The optional NOMEX sleeve is not included with this configuration.
Get Your Halltech Stinger-RZ from Beefcake Racing
Put more breathing room in front of your supercharged LT4 with the Halltech Stinger-RZ STRZ06 configured with the S&B Gray Oiled High-Flow TRACK Filter, stock throttle body, and PCV provision. For fitment or ordering questions, contact Beefcake Racing at sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
