Halltech Systems Stinger-RZ06 Replacement Bridge - Black XPLE - Stinger TrimPak - NOMEX Sleeve (2015 - 2019 Chevrolet Corvette C7 Z06) - STRZ06-BRIDGE
Give your Halltech Stinger-RZ06 intake a more complete refresh with the STRZ06-BRIDGE replacement bridge, Stinger TrimPak, and NOMEX sleeve. Designed for 2015-2019 Chevrolet Corvette C7 Z06 applications using the Halltech Stinger-RZ06 intake, this configuration combines the Black XPLE replacement bridge with the supporting trim and sleeve components needed when you want to renew more than the bridge alone.
The STRZ06-BRIDGE is a dedicated Halltech replacement component for the Stinger-RZ06 intake system, not a universal C7 intake tube. The included Stinger TrimPak refreshes the gasket and retaining O-ring at the intake tube-to-filter box interface, while the NOMEX sleeve adds an insulating barrier around the intake tract. Together, these components make this configuration well suited for refreshing an existing Stinger-RZ06 installation while retaining the other compatible intake components already on the car.
Specifications
- Manufacturer: Halltech Systems
- Part Number: STRZ06-BRIDGE
- Product: Stinger-RZ06 Replacement Bridge
- Bridge Configuration: Black XPLE
- Stinger TrimPak: Included with this configuration
- TrimPak Components: Intake tube-to-filter box sealing gasket and retaining O-ring
- NOMEX Sleeve: Included with this configuration
- Vehicle Platform: Chevrolet Corvette C7 Z06
- Model Years: 2015-2019
- Engine: 6.2L Supercharged LT4
- Intake Application: Halltech Stinger-RZ06
Features
- Replacement Halltech bridge for the Stinger-RZ06 intake system
- Black XPLE bridge configuration
- Designed for 2015-2019 Chevrolet Corvette C7 Z06 applications
- Stinger TrimPak included with this configuration
- TrimPak refreshes the intake tube-to-filter box sealing gasket and retaining O-ring
- NOMEX sleeve included with this configuration
- Sleeve provides an insulating barrier around the intake tract
- Allows the bridge and supporting components to be refreshed without purchasing another complete compatible Stinger-RZ06 intake
- Application-specific Halltech replacement component rather than a universal intake bridge
Refresh the Stinger-RZ06 Bridge Assembly
If your existing Stinger-RZ06 needs more than just a bare replacement bridge, this configuration puts the key pieces together. You get the Black XPLE STRZ06-BRIDGE along with the Stinger TrimPak and NOMEX sleeve, allowing you to refresh the bridge, intake tube-to-filter box sealing components, and intake insulation while continuing to use the other compatible Stinger-RZ06 components already installed on your Corvette.
Stinger TrimPak Included
The included Stinger TrimPak contains the custom gasket used to seal the Halltech Stinger intake tube where it passes through the filter box, along with the O-ring that keeps the gasket in position and helps it maintain its shape. Including these components makes sense when refreshing the bridge because it eliminates the need to rely on the existing trim and sealing pieces at this critical interface.
NOMEX Sleeve Included
This configuration also includes the NOMEX sleeve, adding an insulating barrier around the Halltech intake tract to help isolate it from surrounding engine-compartment heat. Pairing the sleeve with the replacement bridge makes this version a more complete option for owners refreshing an existing Stinger-RZ06 installation.
Built Specifically for the C7 Z06 Stinger-RZ06
STRZ06-BRIDGE is not intended as a generic replacement for every Halltech C7 intake. It is the replacement bridge for the Stinger-RZ06 system used on the 2015-2019 Chevrolet Corvette C7 Z06. Confirm that your existing intake is a Halltech Stinger-RZ06 before ordering.
Fitment
- 2015 Chevrolet Corvette C7 Z06 6.2L Supercharged LT4
- 2016 Chevrolet Corvette C7 Z06 6.2L Supercharged LT4
- 2017 Chevrolet Corvette C7 Z06 6.2L Supercharged LT4
- 2018 Chevrolet Corvette C7 Z06 6.2L Supercharged LT4
- 2019 Chevrolet Corvette C7 Z06 6.2L Supercharged LT4
FAQs
What is included with this Halltech STRZ06-BRIDGE configuration?
This configuration includes the Black XPLE Halltech Stinger-RZ06 replacement bridge, Stinger TrimPak, and NOMEX sleeve. The TrimPak includes the intake tube-to-filter box sealing gasket and its retaining O-ring.
Can I replace the Stinger-RZ06 bridge without buying another complete intake?
Yes. Halltech offers STRZ06-BRIDGE specifically as the replacement bridge for the Stinger-RZ06 system. This configuration also adds the Stinger TrimPak and NOMEX sleeve so those supporting components can be refreshed while the other compatible parts of your existing intake remain in service.
Get Your Halltech Stinger-RZ06 Parts from Beefcake Racing
Refresh your C7 Z06 Halltech Stinger-RZ06 with the replacement bridge, Stinger TrimPak, and NOMEX sleeve from Beefcake Racing. For help confirming STRZ06-BRIDGE for your existing intake system, contact us at sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
