Halltech Systems Stinger-RZ Cold Air Intake System - S&B Red Oiled Filter - No NOMEX Sleeve - 112mm Throttle Body - PCV Hole in T/B Hose (2015 - 2019 Chevrolet Corvette C7 Z06) - STRZ06
Give your supercharged LT4 more room to breathe with the Halltech Systems Stinger-RZ Cold Air Intake System. Engineered for the 2015-2019 Chevrolet Corvette C7 Z06, the STRZ06 combines Halltech's CAD-developed intake design with a sealed airbox that is substantially larger than stock and an induction path designed to reduce the airflow restriction of the factory intake. Halltech reports that at least 20 independent shops, including GM dealerships, have chassis-dyno tested the Stinger-RZ and recorded gains ranging from 40 to 55 rear-wheel horsepower.
This specific STRZ06 configuration combines the S&B Red Oiled Filter with a 112mm throttle-body setup and a PCV hole in the throttle-body hose. The optional NOMEX sleeve is not included. For modified C7 Z06 combinations using a 112mm throttle body, this configuration provides the corresponding throttle-body connection while retaining Halltech's serviceable S&B oiled filtration option and airflow-focused Stinger-RZ architecture.
Specifications
- Manufacturer: Halltech Systems
- Part Number: STRZ06
- Product: Stinger-RZ Cold Air Intake System
- Vehicle: Chevrolet Corvette C7 Z06
- Model Years: 2015-2019
- Engine: 6.2L Supercharged LT4
- Filter Option: S&B Red Oiled Filter
- Filter Media: Oiled
- Throttle Body Configuration: 112mm throttle body
- Throttle-Body Hose: PCV hole included
- NOMEX Sleeve: Not included with this configuration
- Airbox: Sealed, larger-than-stock design
- Intake Development: CAD developed
- Reported Independent Dyno Gains: 40-55 RWHP
- Halltech Published Test Result: 51.6 RWHP
- Reported Quarter-Mile Improvement: 0.41 second ET and 6 mph
- Shipping Box Dimensions: 22 inches x 15 inches x 12 inches when shipped alone
- Shipping Box Weight: 9 pounds when shipped alone
- California Emissions Status: No California Executive Order number
Features
- Designed for the 2015-2019 Chevrolet Corvette C7 Z06 with the supercharged LT4 engine
- CAD-developed Stinger-RZ cold air intake system
- S&B Red Oiled Filter included with this configuration
- Configured specifically for a 112mm throttle body
- PCV hole included in the throttle-body hose
- No NOMEX sleeve included with this configuration
- Sealed airbox is substantially larger than the factory unit to promote better airflow
- Designed to reduce airflow restriction from the factory filter and intake system
- Halltech reports independent chassis-dyno gains ranging from 40 to 55 RWHP
- Halltech publishes a 51.6 RWHP test result for the Stinger-RZ
- Halltech reports a 0.41-second quarter-mile ET improvement and 6 mph increase
- Compatible with Halltech's TRIC Ram Air package without requiring changes to the Stinger-RZ intake system
- Available with multiple dry and oiled filter choices
- Professional installation is strongly recommended by Halltech
- F-panel seal referenced in the installation video is no longer required or supplied with the kit
Proven Stinger-RZ Performance
The Stinger-RZ is engineered to reduce airflow restriction ahead of the C7 Z06's supercharged LT4. Halltech states that at least 20 independent shops, including GM dealerships, have chassis-dyno tested the intake and reported gains ranging from 40 to 55 RWHP. Halltech also publishes a 51.6 RWHP result and reports a quarter-mile improvement of 0.41 second and 6 mph. Actual performance will vary with vehicle condition, modifications, calibration, fuel, atmospheric conditions, and testing procedures.
S&B Red Oiled Filter
This STRZ06 configuration uses the S&B Red Oiled Filter, providing a serviceable oiled filtration option for the Stinger-RZ. Halltech also offers the S&B Blue Dry, S&B Gray Oiled High-Flow TRACK, and TKO Attack Blue Dry Nano filters, giving C7 Z06 owners a choice between dry and oiled filtration configurations.
112mm Throttle Body Configuration
This version is configured specifically for a 112mm throttle body rather than the factory throttle-body setup. The throttle-body hose must match the induction hardware installed on the vehicle, making the correct configuration important when ordering. This STRZ06 variant is intended for C7 Z06 combinations equipped with a 112mm throttle body.
PCV Hole in Throttle-Body Hose
This configuration includes the PCV hole in the throttle-body hose. Halltech offers the PCV provision as a selectable configuration so the Stinger-RZ can be ordered to match the vehicle's PCV routing.
Larger Sealed Airbox
The Stinger-RZ uses a sealed airbox that Halltech describes as much larger than the stock unit to promote better airflow. Because of the increased airbox size, installation requires repositioning some engine-bay components and making minor modifications. Halltech strongly recommends professional installation and regularly audits filter-box fitment against a spare F-panel to ensure proper positioning.
TRIC Ram Air Compatible
The Stinger-RZ is designed so Halltech's TRIC Ram Air package can be added later without requiring changes to the Stinger-RZ intake system. This allows C7 Z06 owners to install the cold air intake first and expand the induction system with the compatible TRIC Ram Air package later.
Emissions Notice
Halltech states that the STRZ06 does not have a California Executive Order number and is not legal for sale in California for use on emissions-controlled vehicles except where legally permitted for qualifying off-road applications such as track racing. Check applicable state and local emissions requirements before ordering or installing this intake.
Fitment
- 2015 Chevrolet Corvette C7 Z06 6.2L Supercharged LT4 with 112mm throttle body
- 2016 Chevrolet Corvette C7 Z06 6.2L Supercharged LT4 with 112mm throttle body
- 2017 Chevrolet Corvette C7 Z06 6.2L Supercharged LT4 with 112mm throttle body
- 2018 Chevrolet Corvette C7 Z06 6.2L Supercharged LT4 with 112mm throttle body
- 2019 Chevrolet Corvette C7 Z06 6.2L Supercharged LT4 with 112mm throttle body
FAQs
Is this Halltech Stinger-RZ configured for a 112mm throttle body?
Yes. This STRZ06 configuration is set up for a 112mm throttle body rather than the stock throttle-body configuration. Make sure the vehicle is equipped with the corresponding 112mm throttle body before selecting this version.
What filter, PCV, and sleeve configuration comes with this STRZ06?
This version includes the S&B Red Oiled Filter and a PCV hole in the throttle-body hose. It is configured for a 112mm throttle body and does not include the optional NOMEX sleeve.
Get Your Halltech Stinger-RZ from Beefcake Racing
Give your supercharged C7 Z06 the airflow capacity to support your performance combination with the Halltech Stinger-RZ STRZ06 configured with the S&B Red Oiled Filter, 112mm throttle-body setup, and PCV provision. For fitment or ordering questions, contact Beefcake Racing at sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
