Halltech Systems Stinger-RZ Cold Air Intake System - S&B Red Oiled Filter - No NOMEX Sleeve - 103mm Throttle Body - PCV Hole in T/B Hose (2015 - 2019 Chevrolet Corvette C7 Z06) - STRZ06
Free up the induction side of your supercharged LT4 with the Halltech Systems Stinger-RZ Cold Air Intake System. Engineered for the 2015-2019 Chevrolet Corvette C7 Z06, the STRZ06 combines Halltech's CAD-developed intake design with a substantially larger sealed airbox and high-flow induction path designed to reduce the airflow restriction of the factory intake. Halltech states that at least 20 independent shops, including GM dealerships, have chassis-dyno tested the Stinger-RZ and reported gains ranging from 40 to 55 rear-wheel horsepower.
This specific STRZ06 configuration combines the S&B Red Oiled Filter with a 103mm throttle-body setup and a PCV hole in the throttle-body hose. The optional NOMEX sleeve is not included with this version. For C7 Z06 owners stepping beyond the factory throttle body, this configuration gives the Stinger-RZ the appropriate 103mm throttle-body connection while retaining Halltech's serviceable S&B oiled filtration option.
Specifications
- Manufacturer: Halltech Systems
- Part Number: STRZ06
- Product: Stinger-RZ Cold Air Intake System
- Vehicle: Chevrolet Corvette C7 Z06
- Model Years: 2015-2019
- Engine: 6.2L Supercharged LT4
- Filter Option: S&B Red Oiled Filter
- Filter Media: Oiled
- Throttle Body Configuration: 103mm throttle body
- Throttle-Body Hose: PCV hole included
- NOMEX Sleeve: Not included with this configuration
- Airbox: Sealed, larger-than-stock design
- Intake Development: CAD developed
- Reported Independent Dyno Gains: 40-55 RWHP
- Halltech Published Test Result: 51.6 RWHP
- Reported Quarter-Mile Improvement: 0.41 second ET and 6 mph
- Shipping Box Dimensions: 22 inches x 15 inches x 12 inches when shipped alone
- Shipping Box Weight: 9 pounds when shipped alone
- California Emissions Status: No California Executive Order number
Features
- Designed for the 2015-2019 Chevrolet Corvette C7 Z06 with the supercharged LT4 engine
- CAD-developed Stinger-RZ cold air intake system
- S&B Red Oiled Filter included with this configuration
- Configured for a 103mm throttle body
- PCV hole included in the throttle-body hose
- No NOMEX sleeve included with this configuration
- Sealed airbox is substantially larger than the factory unit to promote better airflow
- Designed to reduce airflow restriction from the stock filter and intake system
- Halltech reports independent chassis-dyno gains ranging from 40 to 55 RWHP
- Halltech publishes a 51.6 RWHP test result for the Stinger-RZ
- Halltech reports a 0.41-second quarter-mile ET improvement and 6 mph increase
- Compatible with Halltech's TRIC Ram Air package without requiring changes to the Stinger-RZ intake system
- Available with multiple dry and oiled filter choices
- Professional installation is strongly recommended by Halltech
- F-panel seal referenced in the installation video is no longer required or supplied with the kit
Proven Stinger-RZ Performance
The Stinger-RZ is engineered to reduce airflow restriction ahead of the C7 Z06's supercharged LT4. Halltech states that at least 20 independent shops, including GM dealerships, have chassis-dyno tested the intake and reported gains ranging from 40 to 55 RWHP. Halltech also publishes a 51.6 RWHP result and reports a quarter-mile improvement of 0.41 second and 6 mph. Actual results can vary with vehicle condition, modifications, calibration, fuel, atmospheric conditions, and testing procedures.
S&B Red Oiled Filter
This STRZ06 configuration uses the S&B Red Oiled Filter. It gives owners Halltech's serviceable S&B oiled-filter option while retaining the airflow-focused Stinger-RZ intake design. Halltech also offers S&B Blue Dry, S&B Gray Oiled High-Flow TRACK, and TKO Attack Blue Dry Nano filter options for customers who prefer a different filtration configuration.
103mm Throttle Body Configuration
This version is configured specifically for a 103mm throttle body rather than the factory throttle-body setup. Selecting the correct throttle-body configuration is important when ordering the Stinger-RZ because the throttle-body hose must match the induction hardware being used on the vehicle. This STRZ06 is intended for C7 Z06 combinations equipped with a 103mm throttle body.
PCV Hole in Throttle-Body Hose
This configuration includes the PCV hole in the throttle-body hose. Halltech offers the PCV provision as a selectable configuration, allowing the intake to be ordered to match the vehicle's PCV routing rather than requiring the customer to modify the hose after purchase.
Larger Sealed Airbox
The Stinger-RZ uses a sealed airbox that Halltech describes as much larger than the stock unit to promote better airflow. Because of the increased airbox size, installation requires repositioning some engine-bay components and making minor modifications. Halltech strongly recommends professional installation and regularly audits filter-box fitment against a spare F-panel to ensure proper positioning.
TRIC Ram Air Compatible
The Stinger-RZ is designed so Halltech's TRIC Ram Air package can be added later without requiring changes to the Stinger-RZ intake system. That gives C7 Z06 owners the flexibility to install the cold air intake first and expand the induction system with the compatible TRIC Ram Air package later.
Emissions Notice
Halltech states that the STRZ06 does not have a California Executive Order number and is not legal for sale in California for use on emissions-controlled vehicles except where legally permitted for qualifying off-road applications such as track racing. Check applicable state and local emissions requirements before ordering or installing this intake.
Fitment
- 2015 Chevrolet Corvette C7 Z06 6.2L Supercharged LT4 with 103mm throttle body
- 2016 Chevrolet Corvette C7 Z06 6.2L Supercharged LT4 with 103mm throttle body
- 2017 Chevrolet Corvette C7 Z06 6.2L Supercharged LT4 with 103mm throttle body
- 2018 Chevrolet Corvette C7 Z06 6.2L Supercharged LT4 with 103mm throttle body
- 2019 Chevrolet Corvette C7 Z06 6.2L Supercharged LT4 with 103mm throttle body
FAQs
Is this Halltech Stinger-RZ configured for a 103mm throttle body?
Yes. This STRZ06 configuration is ordered with the 103mm throttle-body setup rather than the stock throttle-body configuration. Make sure your C7 Z06 is equipped with the corresponding 103mm throttle body before selecting this version.
What filter, PCV, and sleeve configuration comes with this STRZ06?
This version includes the S&B Red Oiled Filter and a PCV hole in the throttle-body hose. It is configured for a 103mm throttle body and does not include the optional NOMEX sleeve.
Get Your Halltech Stinger-RZ from Beefcake Racing
Give your supercharged C7 Z06 the airflow capacity to support your performance combination with the Halltech Stinger-RZ STRZ06 configured with the S&B Red Oiled Filter, 103mm throttle-body setup, and PCV provision. For fitment or ordering questions, contact Beefcake Racing at sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
