Halltech Systems Stinger-RZ Cold Air Intake System - S&B Red Oiled Filter - No NOMEX Sleeve - 103mm Throttle Body - No PCV Hole in T/B Hose (2015 - 2019 Chevrolet Corvette C7 Z06) - STRZ06
Open up the airflow potential of your supercharged LT4 with the Halltech Systems Stinger-RZ Cold Air Intake System. Engineered for the 2015-2019 Chevrolet Corvette C7 Z06, the STRZ06 uses Halltech's CAD-developed intake architecture, a sealed airbox substantially larger than stock, and a less restrictive induction path designed to help the LT4 breathe more efficiently. Halltech reports chassis-dyno testing by at least 20 independent shops, including GM dealerships, with reported gains ranging from 40 to 55 rear-wheel horsepower.
This STRZ06 is configured with the S&B Red Oiled Filter, a 103mm throttle-body connection, and a throttle-body hose without a PCV hole. No NOMEX insulative sleeve is included with this version. The combination is aimed at modified C7 Z06 applications running a 103mm throttle body while retaining Halltech's serviceable oiled-filter setup and requiring the non-PCV-hole throttle-body hose.
Specifications
- Manufacturer: Halltech Systems
- Part Number: STRZ06
- Product: Stinger-RZ Cold Air Intake System
- Vehicle: Chevrolet Corvette C7 Z06
- Model Years: 2015-2019
- Engine: 6.2L Supercharged LT4
- Filter Option: S&B Red Oiled Filter
- Filter Media: Oiled
- Throttle Body Configuration: 103mm throttle body
- Throttle-Body Hose: No PCV hole
- NOMEX Sleeve: Not included with this configuration
- Airbox: Sealed, larger-than-stock design
- Intake Development: CAD developed
- Reported Independent Dyno Gains: 40-55 RWHP
- Halltech Published Test Result: 51.6 RWHP
- Reported Quarter-Mile Improvement: 0.41 second ET and 6 mph
- Shipping Box Dimensions: 22 inches x 15 inches x 12 inches when shipped alone
- Shipping Box Weight: 9 pounds when shipped alone
- California Emissions Status: No California Executive Order number
Features
- Engineered for the 2015-2019 Chevrolet Corvette C7 Z06 with the supercharged LT4 engine
- CAD-developed Stinger-RZ cold air intake architecture
- S&B Red Oiled Filter included with this configuration
- Serviceable oiled filter media
- Halltech proprietary tapered C7 filter design with 70 perimeter pleats
- Configured for a 103mm throttle body
- Throttle-body hose supplied without a PCV hole
- No NOMEX insulative sleeve included with this configuration
- Sealed airbox is substantially larger than the factory unit to promote increased airflow
- Designed to reduce the airflow restriction of the factory intake system
- Halltech reports independent chassis-dyno gains ranging from 40 to 55 RWHP
- Halltech publishes a 51.6 RWHP test result for the Stinger-RZ
- Halltech reports a 0.41-second quarter-mile ET improvement and 6 mph increase
- Compatible with Halltech's TRIC Ram Air system for a future induction upgrade
- Professional installation is strongly recommended by Halltech
- F-panel seal shown in older installation material is no longer required or supplied
Proven Stinger-RZ Performance
The Stinger-RZ was developed to reduce the airflow restriction created by the factory C7 Z06 intake. Halltech reports that at least 20 independent shops, including GM dealerships, have chassis-dyno tested the system and recorded gains between 40 and 55 RWHP. Halltech also publishes a 51.6 RWHP test result along with a reported quarter-mile improvement of 0.41 second and 6 mph. Actual results can vary based on vehicle condition, modifications, calibration, fuel, atmospheric conditions, and testing procedures.
S&B Red Oiled Filter
This configuration uses the S&B Red Oiled Filter, giving the Stinger-RZ a serviceable oiled filtration setup. Halltech's proprietary C7 Stinger replacement filter design is made specifically for Halltech C7 intake systems and uses a tapered shape with 70 pleats around the perimeter to maximize filtered surface area. The Red Oiled version is one of four filter configurations Halltech offers for the Stinger-RZ.
103mm Throttle Body Configuration
This version is configured for a 103mm throttle body rather than the stock throttle-body connection. Matching the Stinger-RZ throttle-body hose configuration to the throttle body installed on the vehicle is important for proper installation, making this version intended for C7 Z06 combinations equipped with a 103mm throttle body.
No PCV Hole in Throttle-Body Hose
The throttle-body hose supplied with this configuration does not include a PCV hole. Halltech makes the PCV-hole configuration selectable for the STRZ06, so the correct hose should be chosen to match the vehicle's PCV arrangement before installation.
Larger Sealed Airbox
The Stinger-RZ uses a sealed airbox that Halltech describes as much larger than the factory unit to promote better airflow. The larger airbox requires repositioning some engine-bay components and making minor modifications during installation. Halltech recommends professional installation and notes that correct positioning is important for proper filter-box fitment.
TRIC Ram Air Compatible
The Stinger-RZ is designed to accept Halltech's TRIC Ram Air system later without requiring changes to the Stinger-RZ intake itself. That gives C7 Z06 owners the ability to install the cold air intake now and expand the induction system with the compatible TRIC setup in the future.
Emissions Notice
Halltech states that the STRZ06 does not have a California Executive Order number and is not legal for sale in California for use on emissions-controlled vehicles except where legally permitted for qualifying off-road applications such as track racing. Check applicable state and local emissions requirements before ordering or installing this intake.
Fitment
- 2015 Chevrolet Corvette C7 Z06 6.2L Supercharged LT4
- 2016 Chevrolet Corvette C7 Z06 6.2L Supercharged LT4
- 2017 Chevrolet Corvette C7 Z06 6.2L Supercharged LT4
- 2018 Chevrolet Corvette C7 Z06 6.2L Supercharged LT4
- 2019 Chevrolet Corvette C7 Z06 6.2L Supercharged LT4
FAQs
Is this STRZ06 configured for a 103mm throttle body?
Yes. This specific Stinger-RZ configuration uses the 103mm throttle-body setup. It should be selected for a C7 Z06 equipped with the corresponding 103mm throttle body rather than the stock throttle-body configuration.
What configuration is included with this STRZ06?
This version includes the S&B Red Oiled Filter and is configured for a 103mm throttle body with no PCV hole in the throttle-body hose. A NOMEX sleeve is not included with this configuration.
Get Your Halltech Stinger-RZ from Beefcake Racing
Upgrade your supercharged C7 Z06 with the Halltech Stinger-RZ STRZ06 configured with the S&B Red Oiled Filter, 103mm throttle-body setup, and non-PCV-hole throttle-body hose. For fitment or ordering questions, contact Beefcake Racing at sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
