Halltech Systems Stinger-RX Replacement Bridge with Mid-Connector Hose - No NOMEX Sleeve - No Stinger TrimPak (2015 - 2019 Chevrolet Corvette C7 Z06 LT4 / Magnuson 2650) - STRX-BRIDGE
Restore or refresh the heart of your Halltech Stinger-RX intake system with the Halltech Systems STRX-BRIDGE Replacement Bridge. Designed for 2015-2019 Chevrolet Corvette C7 Z06 LT4 applications using a Magnuson 2650 supercharger, this replacement assembly includes the Stinger-RX bridge and mid-connector hose. It gives owners of an existing Stinger-RX system a direct way to replace these core intake components without purchasing an entirely new cold air intake system.
This specific STRX-BRIDGE configuration is supplied without the optional NOMEX sleeve and without the optional Stinger TrimPak. That makes it the straightforward replacement choice when you need the Stinger-RX bridge and mid-connector hose themselves and do not need either of those optional additions. Because Halltech specifically categorizes the STRX-BRIDGE for C7 Z06 LT4 applications equipped with the Magnuson 2650, it should not be confused with Halltech's other Stinger replacement bridges for different C7 intake and engine combinations.
Specifications
- Manufacturer: Halltech Systems
- Part Number: STRX-BRIDGE
- Product: Stinger-RX Replacement Bridge
- Included Component: Stinger-RX replacement bridge
- Included Hose: Mid-connector hose
- Vehicle: Chevrolet Corvette C7 Z06
- Model Years: 2015-2019
- Engine: 6.2L Supercharged LT4
- Supercharger Application: Magnuson 2650
- NOMEX Sleeve: Not included with this configuration
- Stinger TrimPak: Not included with this configuration
Features
- Genuine Halltech replacement bridge for the Stinger-RX intake system
- Designed for 2015-2019 Chevrolet Corvette C7 Z06 LT4 applications with a Magnuson 2650 supercharger
- Includes the Stinger-RX replacement bridge
- Includes the required mid-connector hose
- Allows replacement of the bridge and connector hose without purchasing a complete Stinger-RX intake system
- Correct replacement bridge for the Halltech Stinger-RX application rather than the Stinger-R or Stinger-RZ06 systems
- No NOMEX sleeve included with this configuration
- No Stinger TrimPak included with this configuration
Replacement Stinger-RX Bridge
The STRX-BRIDGE is intended for owners who already have the Halltech Stinger-RX intake system and need to replace its bridge assembly. Instead of buying another complete intake, this replacement component lets you service the portion of the Stinger-RX system you actually need. Halltech supplies the bridge with the mid-connector hose required for the Stinger-RX configuration.
Built for Magnuson 2650 C7 Z06 Applications
Fitment matters with Halltech's C7 Stinger replacement bridges. The STRX-BRIDGE is specifically listed for 2015-2019 C7 Z06 LT4 applications using the Magnuson 2650 supercharger. Halltech offers other replacement bridges for other Stinger configurations, so the STRX-BRIDGE part number is an important distinction when replacing components on a Magnuson 2650-equipped Stinger-RX system.
No NOMEX Sleeve or Stinger TrimPak
This configuration includes the replacement Stinger-RX bridge and mid-connector hose without the optional NOMEX sleeve or Stinger TrimPak. It is the clean choice for an existing installation where those optional components are not needed or are already on hand.
Fitment
- 2015 Chevrolet Corvette C7 Z06 6.2L Supercharged LT4 with Magnuson 2650
- 2016 Chevrolet Corvette C7 Z06 6.2L Supercharged LT4 with Magnuson 2650
- 2017 Chevrolet Corvette C7 Z06 6.2L Supercharged LT4 with Magnuson 2650
- 2018 Chevrolet Corvette C7 Z06 6.2L Supercharged LT4 with Magnuson 2650
- 2019 Chevrolet Corvette C7 Z06 6.2L Supercharged LT4 with Magnuson 2650
FAQs
Does the Halltech STRX-BRIDGE include the mid-connector hose?
Yes. Halltech specifies the STRX-BRIDGE as the replacement Stinger-RX bridge with the mid-connector hose. This configuration does not include the optional NOMEX sleeve or Stinger TrimPak.
Will the STRX-BRIDGE fit a stock-supercharger C7 Z06?
Halltech specifically categorizes the STRX-BRIDGE for 2015-2019 C7 Z06 LT4 applications with a Magnuson 2650. It should not be assumed to fit a different Stinger intake or supercharger configuration simply because the vehicle is a C7 Z06.
Get Your Halltech Stinger-RX Parts from Beefcake Racing
Replacing the bridge on your Halltech Stinger-RX system? Beefcake Racing can help make sure you get the correct Halltech components for your C7 Z06 and Magnuson 2650 combination. Contact us at sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
