Halltech Systems Stinger-RX Replacement Bridge with Mid-Connector Hose - No NOMEX Sleeve - Stinger TrimPak (2015 - 2019 Chevrolet Corvette C7 Z06 LT4 / Magnuson 2650) - STRX-BRIDGE
Replace the core bridge assembly in your Halltech Stinger-RX intake without buying another complete intake system. The Halltech Systems STRX-BRIDGE is the genuine replacement STINGER-RX bridge with mid-connector hose for 2015-2019 Chevrolet Corvette C7 Z06 LT4 applications equipped with a Magnuson 2650 supercharger. This configuration adds the Stinger TrimPak while leaving out the optional NOMEX sleeve, giving you the bridge, connector hose, and trim package needed for this specific Stinger-RX setup.
Fitment is especially important with Halltech's C7 replacement bridges because the STRX-BRIDGE is tied specifically to the Stinger-RX and Magnuson 2650 combination. It is not simply a generic C7 Z06 intake bridge. Whether you are replacing an existing bridge or refreshing your Stinger-RX installation, STRX-BRIDGE lets you purchase the required replacement assembly while retaining the rest of your existing Halltech intake system.
Specifications
- Manufacturer: Halltech Systems
- Part Number: STRX-BRIDGE
- Product: Stinger-RX Replacement Bridge
- Included Component: STINGER-RX replacement bridge
- Included Hose: Mid-connector hose
- Vehicle Application: Chevrolet Corvette C7 Z06
- Model Years: 2015-2019
- Engine: 6.2L Supercharged LT4
- Supercharger Application: Magnuson 2650
- NOMEX Sleeve: Not included with this configuration
- Stinger TrimPak: Included with this configuration
Features
- Genuine Halltech replacement component for the Stinger-RX intake system
- Designed for 2015-2019 Chevrolet Corvette C7 Z06 LT4 applications with the Magnuson 2650 supercharger
- Includes the replacement STINGER-RX bridge
- Includes the mid-connector hose
- Includes the optional Stinger TrimPak in this configuration
- No NOMEX sleeve included with this configuration
- Allows replacement of the Stinger-RX bridge assembly without purchasing another complete cold air intake system
- Application-specific replacement part for the Stinger-RX and Magnuson 2650 combination
Genuine Stinger-RX Replacement Bridge
The STRX-BRIDGE is designed specifically as the replacement bridge for Halltech's Stinger-RX intake system. Halltech supplies the replacement bridge together with its mid-connector hose, allowing an existing Stinger-RX owner to replace this portion of the intake rather than replacing the entire system.
Designed for the Magnuson 2650 Combination
Halltech places the STRX-BRIDGE specifically in its 2015-2019 LT4 Z06 with M2650 application category. That distinction matters when ordering replacement Stinger components because Halltech offers different intake configurations and replacement bridges for different C7 combinations. STRX-BRIDGE is the bridge to match with the Stinger-RX system on the specified Magnuson 2650-equipped C7 Z06 application.
Stinger TrimPak Included
This configuration includes Halltech's optional Stinger TrimPak with the STRX-BRIDGE replacement bridge and mid-connector hose. The optional NOMEX sleeve is not included in this configuration, making this the correct selection when you want the TrimPak but do not need the additional intake sleeve.
Fitment
- 2015 Chevrolet Corvette C7 Z06 6.2L Supercharged LT4 with Magnuson 2650
- 2016 Chevrolet Corvette C7 Z06 6.2L Supercharged LT4 with Magnuson 2650
- 2017 Chevrolet Corvette C7 Z06 6.2L Supercharged LT4 with Magnuson 2650
- 2018 Chevrolet Corvette C7 Z06 6.2L Supercharged LT4 with Magnuson 2650
- 2019 Chevrolet Corvette C7 Z06 6.2L Supercharged LT4 with Magnuson 2650
FAQs
What is included with this STRX-BRIDGE configuration?
This configuration includes the Halltech STINGER-RX replacement bridge, mid-connector hose, and Stinger TrimPak. The optional NOMEX sleeve is not included.
Is STRX-BRIDGE a universal replacement bridge for every C7 Z06 Stinger intake?
No. Halltech specifically categorizes STRX-BRIDGE for its Stinger-RX application on 2015-2019 C7 Z06 LT4 models equipped with a Magnuson 2650 supercharger. Confirm that your existing intake and supercharger combination matches this application before ordering.
Get Your Halltech Stinger-RX Parts from Beefcake Racing
Get the Halltech STRX-BRIDGE replacement bridge with mid-connector hose and Stinger TrimPak for your Magnuson 2650-equipped C7 Z06 from Beefcake Racing. For help confirming your Halltech Stinger-RX configuration before ordering, contact us at sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
