Halltech Systems Stinger-RAZ Package - S&B Gray Oiled High-Flow TRACK Filter - 112mm Throttle Body - PCV Hole in T/B Hose (2015 - 2019 Chevrolet Corvette C7 Z06) - STRAZ
Feed your supercharged LT4 with a complete induction package built for serious airflow. The Halltech Systems Stinger-RAZ combines the Stinger-RZ intake, Kevlar heat-shield sleeve, and TRIC Ram Air Induction system for the 2015-2019 Chevrolet Corvette C7 Z06. This specific STRAZ configuration steps up to the S&B Gray Oiled High-Flow TRACK Filter, is configured for a 112mm throttle body, and includes the PCV hole in the throttle-body hose. For a modified C7 Z06 running the larger 112mm throttle body, this package brings the major intake components together in one application-specific system.
Halltech engineered the Stinger-RZ to reduce the airflow restriction of the stock intake, using a larger-than-stock airbox to promote increased airflow. The included TRIC system complements the Stinger-RZ by bringing additional outside air into the filter-box cavity. Halltech reports that at least 20 independent shops, including GM dealerships, have dyno tested the Stinger-RZ and recorded gains between 50 and 55 RWHP without TRIC. Halltech also publishes a 51.6 RWHP result and reports 726.9 RWHP from combined Stinger-RZ and TRIC testing. Actual results vary with vehicle setup, calibration, fuel, atmospheric conditions, installation, and supporting modifications.
Specifications
- Manufacturer: Halltech Systems
- Part Number: STRAZ
- Product: Stinger-RAZ Package
- Vehicle: Chevrolet Corvette C7 Z06
- Model Years: 2015-2019
- Engine: 6.2L Supercharged LT4
- Intake System: Halltech Stinger-RZ
- Ram Air System: Halltech TRIC Ram Air Induction
- Filter Option: S&B Gray Oiled High-Flow TRACK Filter
- Filter Media: Oiled
- Filter Configuration: High-Flow TRACK
- Throttle Body Configuration: 112mm throttle body
- Throttle-Body Hose Configuration: PCV hole in T/B hose
- Heat Protection: Kevlar heat-shield sleeve
- Manufacturer-Reported Independent Dyno Results: 50-55 RWHP for the Stinger-RZ without TRIC
- Published Stinger-RZ Dyno Gain: 51.6 RWHP
- Combined Stinger-RZ and TRIC Dyno Result: 726.9 RWHP reported by Halltech
- Manufacturer-Reported Quarter-Mile Improvement: 0.41 second elapsed time and 6 mph
- Manufacturer-Reported Maximum Boost: 12.1 PSI in third gear on Halltech's stock C7 Z06 test vehicle
- Installation: Professional installation highly recommended by Halltech
- California Emissions: Halltech does not have a California EO number for this induction system and states it is not legal for sale in California unless used in an off-road application such as track racing
Features
- Complete Stinger-RAZ induction package for the 2015-2019 Chevrolet Corvette C7 Z06
- S&B Gray Oiled High-Flow TRACK Filter configuration
- Configured for a 112mm throttle body
- PCV hole provided in the throttle-body hose
- Combines the Halltech Stinger-RZ intake with TRIC Ram Air Induction
- Includes Halltech's Kevlar heat-shield sleeve
- Stinger-RZ is designed to reduce airflow restriction compared with the stock intake
- Larger-than-stock airbox is designed to promote increased airflow
- TRIC brings additional outside air into the filter-box cavity
- Halltech reports independent Stinger-RZ dyno gains between 50 and 55 RWHP without TRIC
- Halltech publishes a 51.6 RWHP Stinger-RZ dyno result
- Halltech reports 726.9 RWHP from combined Stinger-RZ and TRIC testing
- Halltech reports a 0.41-second quarter-mile improvement and 6 mph trap-speed improvement
- Halltech testing recorded total boost as high as 12.1 PSI in third gear
- Application-specific induction package engineered for the supercharged LT4 C7 Z06
S&B Gray Oiled High-Flow TRACK Filter
This STRAZ configuration uses Halltech's S&B Gray Oiled High-Flow TRACK Filter option. It is the high-flow track-oriented oiled filter choice in the four-filter STRAZ lineup, making this version particularly well matched to owners selecting the 112mm throttle-body configuration for a performance-focused C7 Z06 build.
112mm Throttle Body Configuration
This version is configured for a 112mm throttle body rather than the stock throttle-body arrangement. The larger throttle-body configuration allows the Stinger-RAZ package to be matched to modified LT4 combinations already equipped with a 112mm throttle body. This specific version also includes the PCV-hole provision in the throttle-body hose.
Stinger-RZ with TRIC Ram Air
The Stinger-RAZ combines Halltech's Stinger-RZ intake with the TRIC Ram Air Induction system. The Stinger-RZ is designed to reduce the restriction of the stock intake path, while TRIC brings additional outside air into the filter-box cavity. Together, the two systems create a more comprehensive induction package than the Stinger-RZ intake alone.
Kevlar Heat-Shield Sleeve
The current STRAZ package includes Halltech's Kevlar heat-shield sleeve. The insulating sleeve surrounds the intake tube to provide a thermal barrier between the intake tract and hot underhood air, complementing the outside-air delivery provided by the TRIC system.
Installation Considerations
Halltech highly recommends professional installation. The Stinger-RAZ airbox is larger than the factory unit to promote better airflow, and Halltech states that installation requires moving some engine-bay components and making minor modifications. Halltech also notes that the f-panel seal referenced in its older installation video is no longer required and is not supplied with the current kit. Follow Halltech's current installation instructions when installing the system.
Fitment
- 2015 Chevrolet Corvette C7 Z06 6.2L Supercharged LT4 with 112mm throttle body
- 2016 Chevrolet Corvette C7 Z06 6.2L Supercharged LT4 with 112mm throttle body
- 2017 Chevrolet Corvette C7 Z06 6.2L Supercharged LT4 with 112mm throttle body
- 2018 Chevrolet Corvette C7 Z06 6.2L Supercharged LT4 with 112mm throttle body
- 2019 Chevrolet Corvette C7 Z06 6.2L Supercharged LT4 with 112mm throttle body
FAQs
Is this Halltech STRAZ configuration for the stock C7 Z06 throttle body?
No. This specific version is configured for a 112mm throttle body and includes the PCV hole in the throttle-body hose. Owners retaining the factory throttle body should select the corresponding stock throttle-body STRAZ configuration.
Which filter comes with this Stinger-RAZ configuration?
This version uses the S&B Gray Oiled High-Flow TRACK Filter. Halltech identifies it as its oiled high-flow track filter option for the STRAZ package.
Get Your Halltech Stinger-RAZ from Beefcake Racing
Upgrade your 2015-2019 C7 Corvette Z06 with the Halltech Stinger-RAZ configured with the S&B Gray Oiled High-Flow TRACK Filter, 112mm throttle body, and PCV provision in the throttle-body hose. For fitment or ordering questions, contact Beefcake Racing at sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
