Halltech Systems Stinger-RAZ Package - S&B Gray Oiled High-Flow TRACK Filter - 103mm Throttle Body - PCV Hole in T/B Hose (2015 - 2019 Chevrolet Corvette C7 Z06) - STRAZ
Feed your supercharged LT4 with a complete performance induction package built to move serious air. The Halltech Systems Stinger-RAZ combines the Stinger-RZ intake, Kevlar heat-shield sleeve, and TRIC Ram Air Induction system for the 2015-2019 Chevrolet Corvette C7 Z06. This specific STRAZ configuration features the S&B Gray Oiled High-Flow TRACK Filter, is set up for a 103mm throttle body, and includes the PCV hole in the throttle-body hose.
Halltech engineered the Stinger-RZ to reduce the airflow restriction of the factory intake, while the larger-than-stock airbox is designed to promote better airflow. The TRIC system complements the Stinger-RZ by bringing additional outside air into the filter-box area. Halltech reports that at least 20 independent shops, including GM dealerships, have dyno tested the Stinger-RZ and reported gains between 50 and 55 RWHP without TRIC. Halltech also publishes a 51.6 RWHP result and a combined Stinger-RZ and TRIC dyno result of 726.9 RWHP. Actual performance varies with vehicle configuration, calibration, fuel, conditions, installation, and supporting modifications.
Specifications
- Manufacturer: Halltech Systems
- Part Number: STRAZ
- Product: Stinger-RAZ Package
- Vehicle: Chevrolet Corvette C7 Z06
- Model Years: 2015-2019
- Engine: 6.2L Supercharged LT4
- Intake System: Halltech Stinger-RZ
- Ram Air System: Halltech TRIC Ram Air Induction
- Filter Option: S&B Gray Oiled High-Flow TRACK Filter
- Filter Media: Oiled
- Filter Configuration: High-Flow TRACK
- Throttle Body Configuration: 103mm throttle body
- Throttle-Body Hose Configuration: PCV hole in T/B hose
- Heat Protection: Kevlar heat-shield sleeve
- Manufacturer-Reported Independent Dyno Results: 50-55 RWHP for the Stinger-RZ without TRIC
- Published Stinger-RZ Dyno Gain: 51.6 RWHP
- Combined Stinger-RZ and TRIC Dyno Result: 726.9 RWHP reported by Halltech
- Manufacturer-Reported Maximum Boost: 12.1 PSI in third gear on Halltech's stock C7 Z06 test vehicle
- Installation: Professional installation highly recommended by Halltech
- California Emissions: No California EO number; Halltech states this induction system is not legal for sale in California unless used in an off-road application such as track racing
Features
- Complete performance induction package for the 2015-2019 Chevrolet Corvette C7 Z06
- Configured for a 103mm throttle body
- PCV hole provided in the throttle-body hose
- S&B Gray Oiled High-Flow TRACK Filter configuration
- Combines the Halltech Stinger-RZ intake with TRIC Ram Air Induction
- Includes Halltech's Kevlar heat-shield sleeve
- Stinger-RZ is designed to reduce factory intake restriction
- TRIC complements the intake by supplying additional outside air to the filter-box area
- Larger-than-stock airbox is designed to promote increased airflow
- Halltech reports independent Stinger-RZ dyno results between 50 and 55 RWHP without TRIC
- Halltech publishes a 51.6 RWHP Stinger-RZ dyno result
- Halltech reports a combined Stinger-RZ and TRIC dyno result of 726.9 RWHP
- Halltech testing recorded total boost as high as 12.1 PSI in third gear
- Application-specific induction package engineered for the supercharged LT4 C7 Z06
S&B Gray Oiled High-Flow TRACK Filter
This STRAZ configuration uses the S&B Gray Oiled High-Flow TRACK Filter. Halltech specifically lists the Gray filter as its oiled high-flow track option, making this the performance-focused filter configuration for owners selecting the 103mm throttle-body version of the Stinger-RAZ.
103mm Throttle Body Configuration
This version of the STRAZ is configured for a 103mm throttle body rather than the factory throttle-body arrangement. It is intended for C7 Z06 combinations using the larger 103mm throttle-body configuration and pairs that selection with the PCV-hole provision in the throttle-body hose.
Stinger-RZ with TRIC Ram Air
The Stinger-RAZ combines Halltech's Stinger-RZ intake with the TRIC Ram Air Induction system. The Stinger-RZ is designed to reduce the airflow restriction of the factory intake, while TRIC complements the system by bringing additional outside air into the filter-box area. Halltech reports total boost of 12.1 PSI in third gear during testing on its stock C7 Z06.
Kevlar Heat-Shield Sleeve
Halltech's current STRAZ package includes a Kevlar heat-shield sleeve. The insulating sleeve surrounds the intake tube to provide a thermal barrier between the intake tract and hot underhood air, complementing the Stinger-RZ and TRIC airflow package.
Installation Considerations
Halltech highly recommends professional installation. The Stinger-RAZ uses an airbox that is larger than stock to promote better airflow, and Halltech states that installation requires moving some engine-bay components and making minor modifications. Halltech also notes that the f-panel seal referenced in the older Stinger-RZ installation video is no longer required and is not included with the kit. Follow Halltech's current installation instructions when installing the system.
Fitment
- 2015 Chevrolet Corvette C7 Z06 6.2L Supercharged LT4 with 103mm throttle body
- 2016 Chevrolet Corvette C7 Z06 6.2L Supercharged LT4 with 103mm throttle body
- 2017 Chevrolet Corvette C7 Z06 6.2L Supercharged LT4 with 103mm throttle body
- 2018 Chevrolet Corvette C7 Z06 6.2L Supercharged LT4 with 103mm throttle body
- 2019 Chevrolet Corvette C7 Z06 6.2L Supercharged LT4 with 103mm throttle body
FAQs
Is this Halltech STRAZ configuration for the stock C7 Z06 throttle body?
No. This specific version is configured for a 103mm throttle body and includes the PCV hole in the throttle-body hose. C7 Z06 owners retaining the stock throttle body should select the corresponding stock throttle-body STRAZ configuration.
What filter is included with this Stinger-RAZ configuration?
This version uses the S&B Gray Oiled High-Flow TRACK Filter. Halltech identifies it as the high-flow track option among the four filter choices currently offered for the STRAZ package.
Get Your Halltech Stinger-RAZ from Beefcake Racing
Upgrade your 2015-2019 C7 Corvette Z06 with the Halltech Stinger-RAZ configured with the S&B Gray Oiled High-Flow TRACK Filter, 103mm throttle-body setup, and PCV provision in the throttle-body hose. For fitment or ordering questions, contact Beefcake Racing at sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
