Halltech Systems Stinger-R Replacement Bridge - Stinger TrimPak - No NOMEX Sleeve - 1 PCV Line in Hose (2014 - 2019 Chevrolet Corvette C7 Stingray / 2017 - 2019 Grand Sport) - STR-BRIDGE
Refresh your Halltech Stinger-R intake with the replacement bridge and new Stinger TrimPak without replacing the complete cold air intake system. Halltech Systems STR-BRIDGE is the replacement STINGER-R bridge for compatible 2014-2019 Chevrolet Corvette C7 Stingray and 2017-2019 Grand Sport applications. This version is configured for 1 PCV line in the hose and includes the Stinger TrimPak while leaving out the optional NOMEX sleeve.
This configuration is a strong choice when the bridge needs replacement and you also want to renew the Stinger components at the intake tube-to-filter box interface. The included Stinger TrimPak provides the sealing gasket and retaining O-ring used at that connection. PCV configuration is especially important when ordering the STR-BRIDGE, so Halltech recommends checking the actual car rather than relying on model year alone.
Specifications
- Manufacturer: Halltech Systems
- Part Number: STR-BRIDGE
- Product: Stinger-R Replacement Bridge
- Intake Application: Halltech Stinger-R
- PCV Configuration: 1 PCV Line in Hose
- Stinger TrimPak: Included with this configuration
- TrimPak Components: Intake tube-to-filter box sealing gasket and retaining O-ring
- NOMEX Sleeve: Not included with this configuration
- Vehicle Platform: Chevrolet Corvette C7
- Stingray Fitment: 2014-2019
- Grand Sport Fitment: 2017-2019
- Engine: 6.2L LT1
Features
- Replacement bridge for the Halltech Stinger-R intake system
- Configured for applications using 1 PCV line in the hose
- Stinger TrimPak included with this configuration
- TrimPak includes the gasket used at the Stinger intake tube-to-filter box interface
- TrimPak includes the retaining O-ring for the sealing gasket
- Designed for compatible 2014-2019 Chevrolet Corvette C7 Stingray applications
- Designed for compatible 2017-2019 Chevrolet Corvette C7 Grand Sport applications
- Allows the bridge and sealing components to be refreshed without replacing the complete compatible Stinger-R intake
- No NOMEX sleeve included with this configuration
Replace the Bridge and Refresh the Seal
STR-BRIDGE lets you address the bridge itself without replacing an otherwise serviceable Stinger-R intake. This configuration goes a step further by including the Stinger TrimPak, allowing the intake tube-to-filter box sealing components to be renewed during the bridge installation while the other compatible Stinger-R components remain on the car.
Stinger TrimPak Included
The included Stinger TrimPak provides the custom gasket used to seal the Stinger intake tube where it passes through the filter box along with the retaining O-ring. Including these components with the replacement bridge eliminates the need to rely on the existing TrimPak components when refreshing this portion of the intake system.
1 PCV Line Configuration
This STR-BRIDGE is configured for 1 PCV line in the hose. Halltech states that GM began using one PCV line in 2017, but Halltech has encountered many 2017-2019 Corvettes with two PCV lines. Check the actual PCV configuration on your car before ordering rather than assuming the correct version from model year alone.
No NOMEX Sleeve
The optional NOMEX sleeve is not included with this configuration. This version is intended for an existing Stinger-R installation that needs the 1-PCV replacement bridge and a new Stinger TrimPak but does not require an additional intake sleeve.
Fitment
- 2014 Chevrolet Corvette C7 Stingray 6.2L LT1
- 2015 Chevrolet Corvette C7 Stingray 6.2L LT1
- 2016 Chevrolet Corvette C7 Stingray 6.2L LT1
- 2017 Chevrolet Corvette C7 Stingray 6.2L LT1
- 2018 Chevrolet Corvette C7 Stingray 6.2L LT1
- 2019 Chevrolet Corvette C7 Stingray 6.2L LT1
- 2017 Chevrolet Corvette C7 Grand Sport 6.2L LT1
- 2018 Chevrolet Corvette C7 Grand Sport 6.2L LT1
- 2019 Chevrolet Corvette C7 Grand Sport 6.2L LT1
FAQs
How do I know whether I need the 1-PCV STR-BRIDGE?
Check the PCV configuration physically on your Corvette before ordering. Halltech states that GM began using one PCV line in 2017 but has encountered many 2017-2019 cars with two PCV lines, so model year alone is not enough to determine the correct configuration.
What is included with this STR-BRIDGE configuration?
This configuration includes the Halltech Stinger-R replacement bridge configured for 1 PCV line in the hose plus the Stinger TrimPak with its sealing gasket and retaining O-ring. The optional NOMEX sleeve is not included.
Get Your Halltech Stinger-R Parts from Beefcake Racing
Refresh your C7 Corvette Stinger-R with the Halltech STR-BRIDGE and Stinger TrimPak from Beefcake Racing. For help confirming your PCV configuration or the correct replacement components before ordering, contact us at sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
