Halltech Systems Stinger-R Replacement Bridge - Stinger TrimPak - NOMEX Sleeve - 1 PCV Line in Hose (2014 - 2019 Chevrolet Corvette C7 Stingray / 2017 - 2019 Grand Sport) - STR-BRIDGE
Give your Halltech Stinger-R intake a more complete refresh with the replacement bridge, Stinger TrimPak, and NOMEX sleeve in one configuration. Halltech Systems STR-BRIDGE is the replacement STINGER-R bridge for compatible 2014-2019 Chevrolet Corvette C7 Stingray and 2017-2019 Grand Sport applications. This version is configured for 1 PCV line in the hose and adds both the Stinger TrimPak and NOMEX sleeve, letting you renew the bridge, filter-box sealing components, and intake insulation without purchasing another complete intake system.
The STR-BRIDGE is a dedicated Halltech Stinger-R replacement component rather than a universal C7 intake bridge. The included Stinger TrimPak provides the gasket and retaining O-ring used at the intake tube-to-filter box interface, while the NOMEX sleeve adds a thermal barrier around the intake tract. PCV configuration is critical when ordering, so Halltech recommends physically checking the car instead of relying solely on model year to determine whether the 1-PCV version is correct.
Specifications
- Manufacturer: Halltech Systems
- Part Number: STR-BRIDGE
- Product: Stinger-R Replacement Bridge
- Intake Application: Halltech Stinger-R
- PCV Configuration: 1 PCV Line in Hose
- Stinger TrimPak: Included with this configuration
- TrimPak Components: Intake tube-to-filter box sealing gasket and retaining O-ring
- NOMEX Sleeve: Included with this configuration
- Sleeve Length: 18 inches
- Vehicle Platform: Chevrolet Corvette C7
- Stingray Fitment: 2014-2019
- Grand Sport Fitment: 2017-2019
- Engine: 6.2L LT1
Features
- Replacement bridge for the Halltech Stinger-R intake system
- Configured for applications using 1 PCV line in the hose
- Stinger TrimPak included with this configuration
- TrimPak includes the intake tube-to-filter box sealing gasket and retaining O-ring
- NOMEX sleeve included with this configuration
- 18-inch sleeve adds a thermal barrier around the Halltech intake tract
- Designed for compatible 2014-2019 Chevrolet Corvette C7 Stingray applications
- Designed for compatible 2017-2019 Chevrolet Corvette C7 Grand Sport applications
- Allows the bridge and supporting components to be refreshed without replacing the complete compatible Stinger-R intake
- Application-specific Halltech replacement component rather than a universal intake bridge
A More Complete Stinger-R Bridge Refresh
This STR-BRIDGE configuration is for owners who want to do more than replace the bridge alone. Along with the replacement Stinger-R bridge, you get a new Stinger TrimPak and NOMEX sleeve, allowing three key areas of the existing intake to be refreshed together while the other compatible Stinger-R components remain in service.
Stinger TrimPak Included
The included Stinger TrimPak provides the custom gasket used to seal the Halltech Stinger intake tube where it passes through the filter box, along with the O-ring that holds the gasket in place and helps it maintain its shape. Replacing these components along with the bridge avoids having to rely on the existing TrimPak components during the refresh.
NOMEX Sleeve Included
This configuration also includes Halltech's 18-inch intake sleeve. The sleeve creates a thermal barrier around the intake tube to help isolate the intake tract from surrounding underhood heat. Depending on the installation, Halltech notes that the sleeve length may also provide enough coverage for the throttle body hose and/or filter neck.
1 PCV Line Configuration
This STR-BRIDGE is configured for 1 PCV line in the hose. Halltech states that GM began using one PCV line in 2017, but Halltech has encountered many 2017-2019 Corvettes with two PCV lines. Physically inspect your existing PCV setup before ordering rather than selecting the replacement bridge based only on model year.
Fitment
- 2014 Chevrolet Corvette C7 Stingray 6.2L LT1
- 2015 Chevrolet Corvette C7 Stingray 6.2L LT1
- 2016 Chevrolet Corvette C7 Stingray 6.2L LT1
- 2017 Chevrolet Corvette C7 Stingray 6.2L LT1
- 2018 Chevrolet Corvette C7 Stingray 6.2L LT1
- 2019 Chevrolet Corvette C7 Stingray 6.2L LT1
- 2017 Chevrolet Corvette C7 Grand Sport 6.2L LT1
- 2018 Chevrolet Corvette C7 Grand Sport 6.2L LT1
- 2019 Chevrolet Corvette C7 Grand Sport 6.2L LT1
FAQs
How do I know whether I need the 1-PCV STR-BRIDGE?
Physically check the PCV configuration on your Corvette before ordering. Halltech states that GM began using one PCV line in 2017 but has encountered many 2017-2019 cars with two PCV lines, so model year alone should not be used to choose the correct bridge.
What is included with this STR-BRIDGE configuration?
This configuration includes the Halltech Stinger-R replacement bridge configured for 1 PCV line in the hose, the Stinger TrimPak with its sealing gasket and retaining O-ring, and the NOMEX sleeve.
Get Your Halltech Stinger-R Parts from Beefcake Racing
Refresh your C7 Corvette Stinger-R with the Halltech STR-BRIDGE, Stinger TrimPak, and NOMEX sleeve from Beefcake Racing. For help confirming your PCV configuration or the correct replacement components before ordering, contact us at sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
