Halltech Systems Stingray LT1 Cold Air Intake System - S&B Red Oiled Filter - NOMEX Sleeve - 103mm Throttle Body - Two PCV Lines in Hose (2014 - 2019 Chevrolet Corvette C7 Stingray / 2017 - 2019 Grand Sport) - STR
Step up the induction system on your LT1-powered C7 Corvette with the Halltech Systems STR Cold Air Intake System. Designed for the 2014-2019 Chevrolet Corvette C7 Stingray and 2017-2019 Grand Sport, this STR configuration combines the S&B Red Oiled Filter with a 103mm throttle-body setup, NOMEX heat-barrier sleeve, and a hose configured for two PCV lines. It is built for C7 owners moving beyond the stock throttle-body configuration who want Halltech's proven Stinger intake platform, serviceable oiled filtration, and additional thermal insulation around the intake tract.
The S&B Red Oiled Filter provides a reusable, serviceable oiled-media filtration setup, while the 103mm configuration matches the intake to a compatible 103mm throttle-body combination. Halltech's NOMEX sleeve adds a lightweight thermal barrier around the intake tube to help isolate it from engine-compartment heat. This version is also configured for two PCV lines, an important distinction because Halltech notes that PCV plumbing can vary even among later C7 Corvettes. The vehicle's actual PCV-line count should be physically verified before ordering.
Specifications
- Manufacturer: Halltech Systems
- Part Number: STR
- Product: Stingray LT1 Cold Air Intake System
- Vehicle Applications: Chevrolet Corvette C7 Stingray and Grand Sport
- Stingray Model Years: 2014-2019
- Grand Sport Model Years: 2017-2019
- Engine: 6.2L LT1
- Filter Option: S&B Red Oiled Filter
- Filter Media: Oiled
- Throttle Body Configuration: 103mm
- PCV Configuration: Two PCV lines in hose
- Thermal Sleeve: NOMEX sleeve
- NOMEX Sleeve Length: 18 inches
- NOMEX Sleeve Construction: DuPont Nomex aramid fabric with stretch elastomer
- F-Panel Seal: Not required and no longer included
- Shipping Box Dimensions: 22 inches x 15 inches x 12 inches when shipped alone
- Shipping Box Weight: 9 pounds when shipped alone
- California Emissions Status: No California Executive Order number
Features
- Cold air intake system designed for LT1-powered C7 Corvette applications
- Fits 2014-2019 Chevrolet Corvette C7 Stingray models
- Fits 2017-2019 Chevrolet Corvette C7 Grand Sport models
- S&B Red Oiled Filter included with this configuration
- Reusable, serviceable oiled filter media
- Configured for a compatible 103mm throttle-body setup
- Two-PCV-line hose configuration for compatible C7 LT1 applications
- 18-inch NOMEX sleeve provides an additional thermal barrier around the intake tube
- Heat-resistant DuPont Nomex aramid fabric combined with a stretch elastomer
- PCV configuration can vary among C7 Corvettes of the same model year
- F-panel seal shown in older installation material is no longer required or supplied
- PCV-line count should be physically verified before ordering
S&B Red Oiled Filter
This STR configuration uses the S&B Red Oiled Filter, Halltech's traditional oiled-media filter option. Its serviceable design allows the filter to be cleaned and properly re-oiled as part of routine maintenance, making it a solid choice for enthusiasts who prefer a reusable oiled filter in their C7 induction system.
103mm Throttle Body Configuration
This version of the Halltech STR is configured for a compatible 103mm throttle-body setup rather than the factory LT1 throttle body. It gives C7 Stingray and Grand Sport owners running a 103mm throttle body the STR configuration needed to properly match the intake system to their larger throttle-body combination.
Two PCV Line Configuration
This STR is specifically configured for C7 LT1 applications requiring two PCV lines in the hose. Do not determine the correct PCV configuration solely by model year. Halltech states that GM began using one PCV line in 2017, but it continues to encounter 2017-2019 Corvettes equipped with two PCV lines. Physically inspect the vehicle and confirm its actual PCV-line count before ordering.
NOMEX Heat-Barrier Sleeve
This configuration includes Halltech's black 18-inch NOMEX heat-barrier sleeve. Constructed from heat-resistant DuPont Nomex aramid fabric combined with a stretch elastomer, the sleeve creates a lightweight thermal barrier around the intake tube to help isolate it from hot engine-compartment air. Depending on the intake and sleeve positioning, Halltech notes that its length may also allow coverage of the throttle-body hose and/or filter neck.
Installation Note
Older Halltech installation material may show an F-panel seal. Halltech states that this seal is no longer needed and is therefore no longer supplied with the STR kit. The corresponding F-panel-seal step shown in older installation instructions can be ignored.
Emissions Notice
Halltech states that the STR does not have a California Executive Order number and is not legal for sale in California unless used in a qualifying off-road application such as track racing. Check applicable state and local emissions requirements before ordering or installing this intake.
Fitment
- 2014 Chevrolet Corvette C7 Stingray 6.2L LT1
- 2015 Chevrolet Corvette C7 Stingray 6.2L LT1
- 2016 Chevrolet Corvette C7 Stingray 6.2L LT1
- 2017 Chevrolet Corvette C7 Stingray 6.2L LT1
- 2018 Chevrolet Corvette C7 Stingray 6.2L LT1
- 2019 Chevrolet Corvette C7 Stingray 6.2L LT1
- 2017 Chevrolet Corvette C7 Grand Sport 6.2L LT1
- 2018 Chevrolet Corvette C7 Grand Sport 6.2L LT1
- 2019 Chevrolet Corvette C7 Grand Sport 6.2L LT1
FAQs
Is this Halltech STR designed for a 103mm throttle body?
Yes. This specific STR configuration is set up for a compatible 103mm throttle body rather than the factory LT1 throttle body. It combines that 103mm configuration with the S&B Red Oiled Filter, NOMEX sleeve, and two-PCV-line hose.
How do I know whether my C7 Corvette needs the two-PCV-line Halltech STR?
Physically inspect the vehicle and count its PCV lines before ordering. Halltech states that GM began using one PCV line in 2017, but it has encountered many 2017-2019 Corvettes that still have two PCV lines. This STR configuration is specifically set up for cars requiring two PCV lines.
Get Your Halltech STR from Beefcake Racing
Order the Halltech STR with the S&B Red Oiled Filter, NOMEX sleeve, 103mm throttle-body configuration, and two-PCV-line hose for your LT1-powered C7 Corvette. For help confirming the correct configuration before ordering, contact Beefcake Racing at sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
