Halltech Systems MF Killer Bee Replacement Bridge - MF103 Black XLPE - NOMEX Sleeve (2005 - 2013 Chevrolet Corvette C6) - KBMF-BRIDGE
Replace the bridge in your Halltech MF Killer Bee intake while adding Halltech's available NOMEX sleeve option with the Halltech Systems MF Killer Bee Replacement Bridge KBMF-BRIDGE. This configuration combines the MF103 Black XLPE replacement bridge with the NOMEX sleeve, making it the complete choice for an existing Halltech MF Killer Bee setup that needs the 103 mm replacement bridge along with the sleeved configuration.
The MF103 retains a nominal 103 mm internal diameter at the MAF sensor, which Halltech specifies as the same nominal diameter as the stock intake. That provides a cross-sectional area of 8,332 square mm. Halltech also offers larger MF108 and CF112 replacement bridges, but those increase MAF cross-sectional area and require tuning. This MF103 version keeps the replacement bridge in Halltech's stock-diameter configuration while adding the NOMEX sleeve selected with this package.
Specifications
- Manufacturer: Halltech Systems
- Part Number: KBMF-BRIDGE
- Product: MF Killer Bee Replacement Bridge
- Bridge Configuration: MF103
- Bridge Color / Material Configuration: Black XLPE
- Nominal Internal Diameter at MAF Sensor: 103 mm
- MAF Cross-Sectional Area: 8,332 square mm
- MAF Diameter Compared with Stock: Same nominal 103 mm internal diameter as the stock intake
- NOMEX Sleeve: Included with this configuration
- Product Type: Replacement MF Killer Bee bridge
- Application: Halltech MF Killer Bee intake systems
- Vehicle Platform: 2005 - 2013 Chevrolet Corvette C6
Features
- Replacement bridge for Halltech MF Killer Bee intake systems
- MF103 bridge configuration
- Black XLPE configuration
- Nominal 103 mm internal diameter at the MAF sensor
- 8,332 square mm MAF cross-sectional area
- Matches the stock intake's nominal 103 mm MAF diameter
- Includes Halltech's selectable NOMEX sleeve option
- Allows replacement of the bridge without purchasing another complete MF Killer Bee intake system
- Designed for Halltech C6 MF Killer Bee applications
MF103 Stock-Diameter MAF Configuration
The MF103 designation identifies the bridge's MAF sizing. Halltech specifies a nominal internal diameter of 103 mm at the MAF sensor, the same nominal diameter as the stock intake. That produces a cross-sectional area of 8,332 square mm and distinguishes the MF103 from Halltech's larger replacement-bridge configurations.
MF103 Versus MF108 and CF112
Choosing the correct replacement bridge size matters because Halltech offers three different MAF-area configurations. The MF103 retains the stock nominal 103 mm diameter and 8,332 square mm cross-sectional area. The MF108 increases nominal diameter to 108 mm and cross-sectional area to 9,161 square mm, approximately 10 percent more area than stock, and Halltech states that tuning is required. The CF112 increases nominal diameter to 112 mm and cross-sectional area to 9,852 square mm, approximately 18 percent more than stock, and Halltech also states that tuning is required. If your existing MF Killer Bee uses the MF103 configuration, this is the corresponding 103 mm replacement.
Black XLPE Bridge Configuration
This KBMF-BRIDGE is configured as the MF103 Black XLPE bridge. Halltech sells the MF Killer Bee bridge separately and provides selectable bridge size and color configurations, allowing an existing MF Killer Bee system to be serviced without purchasing another complete cold air intake when only the bridge needs replacement.
NOMEX Sleeve Included
This configuration includes the NOMEX sleeve option offered by Halltech for the MF Killer Bee replacement bridge. That is the key difference between this listing and the otherwise matching MF103 Black XLPE configuration without the sleeve. If you want the MF103 Black XLPE bridge together with Halltech's selectable NOMEX sleeve option, this is the appropriate configuration.
Replacement Bridge, Not a Complete Intake System
KBMF-BRIDGE is specifically sold by Halltech as a replacement MF Killer Bee bridge. It is not a complete cold air intake system. This listing is intended for an existing compatible Halltech MF Killer Bee installation where the MF103 bridge itself needs to be replaced and the NOMEX sleeve option is desired.
Fitment
- 2005 Chevrolet Corvette C6
- 2006 Chevrolet Corvette C6
- 2007 Chevrolet Corvette C6
- 2008 Chevrolet Corvette C6
- 2009 Chevrolet Corvette C6
- 2010 Chevrolet Corvette C6
- 2011 Chevrolet Corvette C6
- 2012 Chevrolet Corvette C6
- 2013 Chevrolet Corvette C6
Fitment Note: This is a replacement MF103 bridge for compatible Halltech MF Killer Bee intake systems. It is not a complete cold air intake and should not be treated as a universal replacement bridge based solely on Corvette model year. Verify that the existing Halltech intake requires the MF103 bridge configuration before ordering.
FAQs
What size is the Halltech MF103 replacement bridge?
Halltech specifies the MF103 with a nominal internal diameter of 103 mm at the MAF sensor, the same nominal diameter as the stock intake. Its MAF cross-sectional area is 8,332 square mm.
Does this KBMF-BRIDGE include the Halltech NOMEX sleeve?
Yes. This specific configuration combines the MF103 Black XLPE replacement bridge with Halltech's selectable NOMEX sleeve option. It is the sleeved version of the MF103 Black XLPE replacement bridge.
Get Your Halltech MF Killer Bee Replacement Bridge from Beefcake Racing
Keep your Halltech MF Killer Bee intake properly configured with the MF103 Black XLPE Replacement Bridge KBMF-BRIDGE from Beefcake Racing. This configuration includes the NOMEX sleeve and gives you the replacement bridge components specified in this package without requiring the purchase of another complete intake system. For help confirming your Halltech intake configuration before ordering, contact Beefcake Racing at sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
