Halltech Systems MF Killer Bee Replacement Bridge - CF112 Matte Finish Carbon Fiber - No NOMEX Sleeve (2005 - 2013 Chevrolet Corvette C6) - KBMF-BRIDGE
Go to Halltech's largest replacement bridge configuration with the Halltech Systems MF Killer Bee Replacement Bridge KBMF-BRIDGE in CF112 Matte Finish Carbon Fiber. Designed as a replacement bridge for compatible Halltech MF Killer Bee intake systems, the CF112 substantially increases MAF cross-sectional area compared with the stock intake. This specific configuration features Halltech's matte-finish carbon fiber construction and does not include the optional NOMEX sleeve.
The CF112 has a nominal internal diameter of 112 mm at the MAF sensor and 9,852 square mm of cross-sectional area. Halltech specifies that as an 18 percent increase over stock, making the CF112 the largest of the three replacement bridge sizes listed for the MF Killer Bee. That increased MAF area also means tuning is required. Halltech identifies the matte-finish CF112 as a made-to-order option and states that it takes approximately one to two weeks to ship.
Specifications
- Manufacturer: Halltech Systems
- Part Number: KBMF-BRIDGE
- Product: MF Killer Bee Replacement Bridge
- Bridge Configuration: CF112
- Bridge Material: Carbon fiber
- Finish: Matte
- Nominal Internal Diameter at MAF Sensor: 112 mm
- MAF Cross-Sectional Area: 9,852 square mm
- MAF Area Increase: 18 percent more than stock
- Tuning Requirement: Tune required
- NOMEX Sleeve: Not included with this configuration
- Production: Made to order
- Manufacturer-Stated Shipping Lead Time: Approximately one to two weeks
- Product Type: Replacement MF Killer Bee bridge
- Application: Halltech MF Killer Bee intake systems
- Vehicle Platform: 2005 - 2013 Chevrolet Corvette C6
Features
- Replacement bridge for Halltech MF Killer Bee intake systems
- CF112 bridge configuration
- Matte-finish carbon fiber construction
- 112 mm nominal internal diameter at the MAF sensor
- 9,852 square mm MAF cross-sectional area
- 18 percent greater MAF area than stock
- Largest MAF cross-sectional area of Halltech's three listed MF Killer Bee replacement bridge sizes
- Halltech specifies that tuning is required
- No NOMEX sleeve included with this configuration
- Made-to-order Halltech configuration
- Halltech states approximately one to two weeks to ship
- Allows replacement or reconfiguration of the bridge without purchasing another complete MF Killer Bee intake
CF112 Delivers an 18 Percent Increase in MAF Area
The CF112 is Halltech's largest listed replacement bridge configuration for the MF Killer Bee. Its nominal 112 mm internal diameter at the MAF sensor produces 9,852 square mm of cross-sectional area, an 18 percent increase compared with stock. For an MF Killer Bee setup intended to use the CF112 configuration, this is the replacement bridge that maintains Halltech's larger 112 mm MAF section.
CF112 Requires Tuning
The CF112's increased MAF cross-sectional area means tuning is not optional. Halltech specifically states that a tune is required for this bridge size. If you are changing an existing MF103-equipped intake to the CF112 rather than simply replacing an existing CF112 bridge, the calibration requirement needs to be addressed as part of the conversion.
MF103 Versus MF108 Versus CF112
Halltech lists three replacement bridge sizes for the MF Killer Bee. The MF103 uses a nominal 103 mm internal diameter and 8,332 square mm of MAF area, matching the stock intake's nominal diameter. The MF108 increases that to 108 mm and 9,161 square mm, which is 10 percent more area than stock and requires tuning. The CF112 moves up to 112 mm and 9,852 square mm, providing an 18 percent increase over stock and also requiring tuning.
Matte Finish Carbon Fiber Construction
Unlike the Black XLPE configurations available in other MF Killer Bee bridge sizes, this CF112 is Halltech's matte-finish carbon fiber option. The carbon fiber construction and matte finish are part of the CF112 configuration specified by Halltech, providing the distinctive material and appearance associated with this version of the replacement bridge.
Made-to-Order CF112 Configuration
Halltech identifies the matte-finish CF112 as a made-to-order option. The manufacturer states that it takes approximately one to two weeks to ship, so customers should account for the additional production time when ordering this particular bridge configuration.
No NOMEX Sleeve Included
This specific configuration does not include Halltech's optional NOMEX sleeve. Halltech provides the sleeve as a selectable option for KBMF-BRIDGE, allowing the replacement bridge to be ordered with or without it. This listing is specifically for the CF112 Matte Finish Carbon Fiber bridge without the NOMEX sleeve.
Replacement Bridge, Not a Complete Intake System
KBMF-BRIDGE is a replacement bridge for an existing compatible Halltech MF Killer Bee intake system and is not a complete cold air intake. This allows the bridge itself to be replaced or the system to be reconfigured to the CF112 setup without purchasing another complete intake. When changing to the CF112, remember that Halltech specifically requires tuning because of the increased MAF cross-sectional area.
Fitment
- 2005 Chevrolet Corvette C6
- 2006 Chevrolet Corvette C6
- 2007 Chevrolet Corvette C6
- 2008 Chevrolet Corvette C6
- 2009 Chevrolet Corvette C6
- 2010 Chevrolet Corvette C6
- 2011 Chevrolet Corvette C6
- 2012 Chevrolet Corvette C6
- 2013 Chevrolet Corvette C6
Fitment Note: This is a CF112 replacement bridge for compatible Halltech MF Killer Bee intake systems and is not a complete or universal cold air intake based solely on Corvette model year. Halltech categorizes KBMF-BRIDGE for 2005 - 2013 C6 applications, including LS2, LS3, and LS7/Z06 categories. Verify that your existing Halltech intake is compatible with the CF112 bridge configuration. Halltech specifies that tuning is required for the CF112.
FAQs
How large is the Halltech CF112 Killer Bee replacement bridge?
Halltech specifies the CF112 at a nominal 112 mm internal diameter at the MAF sensor with 9,852 square mm of cross-sectional area. That is an 18 percent increase in MAF area compared with stock.
Does the Halltech CF112 require tuning?
Yes. Halltech explicitly states that tuning is required for the CF112 because of its increased MAF cross-sectional area. This particular configuration is the matte-finish carbon fiber CF112 without the optional NOMEX sleeve.
Get Your Halltech CF112 Killer Bee Replacement Bridge from Beefcake Racing
Step up to Halltech's largest listed MF Killer Bee replacement bridge configuration with the CF112 Matte Finish Carbon Fiber KBMF-BRIDGE from Beefcake Racing. With a 112 mm nominal MAF diameter and 18 percent more cross-sectional area than stock, the CF112 is built for applications configured and tuned to use the larger MAF section. This version does not include the optional NOMEX sleeve. For help confirming the correct bridge for your Halltech intake, contact Beefcake Racing at sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
