Halltech Systems MF Killer Bee Replacement Bridge - CF112 Matte Finish Carbon Fiber - NOMEX Sleeve (2005 - 2013 Chevrolet Corvette C6) - KBMF-BRIDGE
Go to Halltech's largest replacement bridge configuration while adding the available NOMEX sleeve with the Halltech Systems MF Killer Bee Replacement Bridge KBMF-BRIDGE in CF112 Matte Finish Carbon Fiber. Designed as a replacement bridge for compatible Halltech MF Killer Bee intake systems, this configuration combines Halltech's 112 mm carbon fiber bridge with the optional NOMEX sleeve for customers who want the sleeved CF112 setup without purchasing another complete cold air intake.
The CF112 has a nominal internal diameter of 112 mm at the MAF sensor and 9,852 square mm of cross-sectional area. Halltech specifies that as an 18 percent increase over stock, making the CF112 the largest of the three replacement bridge sizes listed for the MF Killer Bee. That increased MAF area requires tuning. Halltech also identifies the matte-finish carbon fiber CF112 as a made-to-order configuration with an approximately one-to-two-week stated shipping lead time.
Specifications
- Manufacturer: Halltech Systems
- Part Number: KBMF-BRIDGE
- Product: MF Killer Bee Replacement Bridge
- Bridge Configuration: CF112
- Bridge Material: Carbon fiber
- Finish: Matte
- Nominal Internal Diameter at MAF Sensor: 112 mm
- MAF Cross-Sectional Area: 9,852 square mm
- MAF Area Increase: 18 percent more than stock
- Tuning Requirement: Tune required
- NOMEX Sleeve: Included with this configuration
- Production: Made to order
- Manufacturer-Stated Shipping Lead Time: Approximately one to two weeks
- Product Type: Replacement MF Killer Bee bridge
- Application: Halltech MF Killer Bee intake systems
- Vehicle Platform: 2005 - 2013 Chevrolet Corvette C6
Features
- Replacement bridge for Halltech MF Killer Bee intake systems
- CF112 bridge configuration
- Matte-finish carbon fiber construction
- 112 mm nominal internal diameter at the MAF sensor
- 9,852 square mm MAF cross-sectional area
- 18 percent greater MAF area than stock
- Largest MAF cross-sectional area of Halltech's three listed MF Killer Bee replacement bridge sizes
- Halltech specifies that tuning is required
- Includes Halltech's optional NOMEX sleeve
- Made-to-order Halltech configuration
- Halltech states approximately one to two weeks to ship
- Allows replacement or reconfiguration of the bridge without purchasing another complete MF Killer Bee intake
CF112 Delivers an 18 Percent Increase in MAF Area
The CF112 is Halltech's largest listed replacement bridge configuration for the MF Killer Bee. Its nominal 112 mm internal diameter at the MAF sensor provides 9,852 square mm of cross-sectional area, an 18 percent increase compared with stock. For an MF Killer Bee setup intended to use the CF112 configuration, this replacement bridge maintains Halltech's larger 112 mm MAF section.
CF112 Requires Tuning
The CF112's increased MAF cross-sectional area means tuning is required. Halltech specifically identifies the CF112 as a tune-required bridge configuration. If you are changing from an MF103 to the CF112 rather than simply replacing an existing CF112 bridge, the calibration requirement needs to be addressed as part of the change.
MF103 Versus MF108 Versus CF112
Halltech lists three replacement bridge sizes for the MF Killer Bee. The MF103 uses a nominal 103 mm internal diameter and 8,332 square mm of MAF area, matching the stock intake's nominal diameter. The MF108 increases that to 108 mm and 9,161 square mm, providing 10 percent more area than stock and requiring tuning. The CF112 moves up to 112 mm and 9,852 square mm, providing an 18 percent increase over stock and also requiring tuning.
Matte Finish Carbon Fiber Construction
This version of KBMF-BRIDGE uses Halltech's CF112 matte-finish carbon fiber configuration. It combines the largest MAF cross-sectional area offered among the three listed replacement bridge sizes with the carbon fiber material and matte finish specified for this CF112 version.
NOMEX Sleeve Included
This configuration includes the optional NOMEX sleeve offered by Halltech for KBMF-BRIDGE. That distinguishes it from the otherwise matching CF112 Matte Finish Carbon Fiber bridge sold without the sleeve option. If you want the matte carbon fiber CF112 bridge together with Halltech's NOMEX sleeve, this is the corresponding configuration.
Made-to-Order CF112 Configuration
Halltech identifies the matte-finish CF112 as a made-to-order option and states that it takes approximately one to two weeks to ship. Customers should account for that additional production lead time when ordering this particular carbon fiber bridge configuration.
Replacement Bridge, Not a Complete Intake System
KBMF-BRIDGE is a replacement bridge for an existing compatible Halltech MF Killer Bee intake system and is not a complete cold air intake. This allows the bridge itself to be replaced or the system to be reconfigured to the CF112 setup without purchasing another complete intake. When changing to the CF112, Halltech's tuning requirement must be accounted for because of the increased MAF cross-sectional area.
Fitment
- 2005 Chevrolet Corvette C6
- 2006 Chevrolet Corvette C6
- 2007 Chevrolet Corvette C6
- 2008 Chevrolet Corvette C6
- 2009 Chevrolet Corvette C6
- 2010 Chevrolet Corvette C6
- 2011 Chevrolet Corvette C6
- 2012 Chevrolet Corvette C6
- 2013 Chevrolet Corvette C6
Fitment Note: This is a CF112 replacement bridge for compatible Halltech MF Killer Bee intake systems and is not a complete or universal cold air intake based solely on Corvette model year. Halltech categorizes KBMF-BRIDGE for 2005 - 2013 C6 applications, including LS2, LS3, and LS7/Z06 categories. Verify that your existing Halltech intake is compatible with the CF112 bridge configuration. Halltech specifies that tuning is required for the CF112.
FAQs
How large is the Halltech CF112 Killer Bee replacement bridge?
Halltech specifies the CF112 at a nominal 112 mm internal diameter at the MAF sensor with 9,852 square mm of cross-sectional area. That provides an 18 percent increase in MAF area compared with stock, and Halltech specifies that tuning is required.
Does this CF112 KBMF-BRIDGE include the NOMEX sleeve?
Yes. This specific configuration combines Halltech's CF112 Matte Finish Carbon Fiber replacement bridge with the optional NOMEX sleeve. Halltech identifies the matte-finish CF112 as a made-to-order configuration with an approximately one-to-two-week stated shipping lead time.
Get Your Halltech CF112 Killer Bee Replacement Bridge from Beefcake Racing
Step up to Halltech's largest listed MF Killer Bee replacement bridge configuration with the CF112 Matte Finish Carbon Fiber KBMF-BRIDGE from Beefcake Racing. This version combines the 112 mm carbon fiber bridge with the NOMEX sleeve for customers who want the sleeved CF112 setup. With 18 percent more MAF area than stock, the CF112 requires tuning and should be matched to the correct intake configuration. For help confirming the right bridge for your Halltech intake, contact Beefcake Racing at sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
