Halltech Systems MF Killer Bee Replacement Bridge - MF108 Black XLPE - No NOMEX Sleeve (2005 - 2013 Chevrolet Corvette C6) - KBMF-BRIDGE
Step up to Halltech's larger MF108 MAF configuration or replace an existing MF108 bridge with the Halltech Systems MF Killer Bee Replacement Bridge KBMF-BRIDGE. This version is configured as the MF108 Black XLPE bridge without the optional NOMEX sleeve. Halltech sells the MF Killer Bee bridge separately, making it possible to replace or reconfigure the bridge in an existing compatible intake system without purchasing another complete cold air intake.
The MF108 increases the nominal internal diameter at the MAF sensor to 108 mm and provides 9,161 square mm of cross-sectional area. Halltech specifies that as approximately 10 percent more MAF area than the stock intake. That larger cross section is the key difference between the MF108 and stock-diameter MF103 configuration, and it comes with an important requirement: Halltech explicitly states that a tune is required when using the MF108. This no-sleeve configuration provides the MF108 Black XLPE replacement bridge without adding Halltech's optional NOMEX sleeve.
Specifications
- Manufacturer: Halltech Systems
- Part Number: KBMF-BRIDGE
- Product: MF Killer Bee Replacement Bridge
- Bridge Configuration: MF108
- Bridge Color / Material Configuration: Black XLPE
- Nominal Internal Diameter at MAF Sensor: 108 mm
- MAF Cross-Sectional Area: 9,161 square mm
- MAF Area Increase: Approximately 10 percent more than the stock intake
- Tuning Requirement: Tune required
- NOMEX Sleeve: Not included with this configuration
- Product Type: Replacement MF Killer Bee bridge
- Application: Halltech MF Killer Bee intake systems
- Vehicle Platform: 2005 - 2013 Chevrolet Corvette C6
Features
- Replacement bridge for Halltech MF Killer Bee intake systems
- MF108 bridge configuration
- Black XLPE configuration
- 108 mm nominal internal diameter at the MAF sensor
- 9,161 square mm MAF cross-sectional area
- Approximately 10 percent greater MAF area than the stock intake
- Provides a larger MAF cross section than Halltech's MF103 bridge
- Halltech specifies that tuning is required with the MF108
- No NOMEX sleeve included with this configuration
- Allows replacement or reconfiguration of the bridge without purchasing another complete MF Killer Bee intake
- Designed for compatible Halltech C6 MF Killer Bee applications
MF108 Increases MAF Cross-Sectional Area
The MF108 is Halltech's larger MAF bridge option between the stock-diameter MF103 and the even larger CF112. Halltech specifies a nominal internal diameter of 108 mm at the MAF sensor and a cross-sectional area of 9,161 square mm. Compared with the stock intake, that represents approximately a 10 percent increase in MAF cross-sectional area.
MF108 Requires Tuning
The increased MAF cross section makes tuning an essential part of an MF108 installation. Halltech specifically states that a tune is required because of the MF108's increased area. This is an important distinction from the MF103, which retains the stock intake's nominal 103 mm internal diameter and 8,332 square mm cross-sectional area. Do not treat an MF108 bridge swap as equivalent to replacing an MF103 with another stock-diameter MF103 bridge.
MF103 Versus MF108 Versus CF112
Halltech offers three bridge sizes to accommodate different MF Killer Bee configurations. The MF103 has a nominal 103 mm internal diameter and 8,332 square mm of MAF area, matching the stock intake's nominal diameter. The MF108 used here increases diameter to 108 mm and area to 9,161 square mm, approximately 10 percent above stock. The CF112 moves to a nominal 112 mm diameter and 9,852 square mm of cross-sectional area, approximately 18 percent above stock. Halltech states that both the MF108 and CF112 require tuning.
Black XLPE Bridge Configuration
This KBMF-BRIDGE is configured as the MF108 Black XLPE bridge. Halltech's replacement-bridge program allows the bridge size and color configuration to be selected separately, giving owners of compatible MF Killer Bee systems a way to replace or reconfigure the bridge itself instead of purchasing another complete intake system.
No NOMEX Sleeve Included
This specific configuration does not include Halltech's optional NOMEX sleeve. Halltech provides the sleeve as a selectable option on the KBMF-BRIDGE product page, allowing the replacement bridge to be ordered with or without it. This listing is specifically for the MF108 Black XLPE bridge without the NOMEX sleeve.
Replacement Bridge, Not a Complete Intake System
KBMF-BRIDGE is a replacement bridge for the Halltech MF Killer Bee system, not a complete cold air intake. This listing is intended for an existing compatible Halltech MF Killer Bee installation where the bridge itself needs to be replaced or changed to the MF108 configuration. Because the MF108 changes the MAF cross-sectional area, the required tuning must also be accounted for when moving to this bridge size.
Fitment
- 2005 Chevrolet Corvette C6
- 2006 Chevrolet Corvette C6
- 2007 Chevrolet Corvette C6
- 2008 Chevrolet Corvette C6
- 2009 Chevrolet Corvette C6
- 2010 Chevrolet Corvette C6
- 2011 Chevrolet Corvette C6
- 2012 Chevrolet Corvette C6
- 2013 Chevrolet Corvette C6
Fitment Note: This is a replacement MF108 bridge for compatible Halltech MF Killer Bee intake systems and is not a complete or universal cold air intake based solely on Corvette model year. Halltech categorizes KBMF-BRIDGE for 2005-2013 C6 applications, including its LS2, LS3, and LS7/Z06 C6 categories. Verify that your existing Halltech intake is compatible with the MF108 bridge configuration, and remember that Halltech specifies that a tune is required for the MF108.
FAQs
How much larger is the Halltech MF108 than the stock MAF configuration?
Halltech specifies the MF108 at a nominal 108 mm internal diameter at the MAF sensor with 9,161 square mm of cross-sectional area. That is approximately 10 percent more area than the stock intake.
Does the Halltech MF108 require tuning?
Yes. Halltech explicitly states that a tune is required because the MF108 increases MAF cross-sectional area compared with the stock intake. This configuration does not include the optional NOMEX sleeve.
Get Your Halltech MF108 Killer Bee Replacement Bridge from Beefcake Racing
Replace or reconfigure the bridge in your Halltech MF Killer Bee intake with the MF108 Black XLPE KBMF-BRIDGE from Beefcake Racing. With its 108 mm nominal MAF diameter and approximately 10 percent greater cross-sectional area than stock, the MF108 is the larger Halltech bridge configuration for builds set up and tuned to use it. This version does not include the optional NOMEX sleeve. For help confirming the correct bridge configuration for your Halltech intake, contact Beefcake Racing at sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
