Halltech Systems C6 Killer Bee MF Conversion Package - S&B Red Oiled Filter - MF103 Black XLPE - NOMEX Sleeve - Stock Throttle Body - No PCV Hole in Hose (2005 - 2007 Chevrolet Corvette C6 LS2) - KBLS2CONV
Convert your LS2-powered C6 Corvette to Halltech's Killer Bee MF induction platform with a package engineered specifically for the 2005-2007 Chevrolet Corvette C6 LS2. This KBLS2CONV configuration combines the MF103 Black XLPE bridge with an S&B Red Oiled Filter, NOMEX sleeve, and a hose sized for the stock C6 throttle body with no PCV hole. The MF103 retains a nominal 103mm internal diameter at the MAF sensor, matching the stock intake diameter while bringing the LS2 into Halltech's Killer Bee MF system.
The LS2 conversion package replaces the original MAF arrangement with a probe-style LS3-style MAF sensor and includes Halltech's H108124 high-density 5-pin-to-GT MAF adapter harness along with the proprietary Halltech Beehive heat shield. The MF103 provides 8,332 square mm of cross-sectional area at the MAF sensor. Although the MF103 maintains the stock-size 103mm MAF diameter, Halltech specifies that the LS2 conversion package requires MAF table conversion and tuning because of the conversion to the probe-style MAF arrangement.
Specifications
- Manufacturer: Halltech Systems
- Part Number: KBLS2CONV
- Product: C6 Killer Bee MF Conversion Package
- Bridge: MF103 Black XLPE
- MF103 Nominal Internal Diameter at MAF Sensor: 103mm
- MF103 Cross-Sectional Area: 8,332 square mm
- Filter: S&B Red Oiled Filter
- Filter Type: Oiled
- NOMEX Sleeve: Yes
- Throttle Body: Stock C6 throttle body
- PCV Hole in Hose: No
- MAF Sensor: Probe-style LS3-style MAF sensor
- MAF Adapter Harness: Halltech H108124 high-density 5-pin-to-GT adapter harness
- Heat Shield: Halltech proprietary Beehive heat shield
- MAF Table Conversion: Required
- Tuning: Required
- Application: 2005-2007 Chevrolet Corvette C6 LS2
Features
- Complete Killer Bee MF conversion package designed for the 2005-2007 Chevrolet Corvette C6 LS2
- MF103 Black XLPE bridge maintains a nominal 103mm internal diameter at the MAF sensor
- 8,332 square mm of cross-sectional area at the MAF sensor
- S&B Red Oiled Filter provides Halltech's traditional oiled filtration option
- Includes NOMEX sleeve for this specific configuration
- Configured for the stock C6 throttle body
- Throttle body hose supplied without a PCV hole
- Includes probe-style LS3-style MAF sensor required for the LS2 conversion
- Includes Halltech H108124 high-density 5-pin-to-GT MAF adapter harness
- Includes Halltech's proprietary Beehive heat shield
- Halltech reports using this LS2 conversion package on its company LS2 for more than 40,000 miles, including drag testing and road racing
- Requires MAF table conversion and tuning after installation
Installation and Tuning
Halltech specifies that the Killer Bee MF LS2 conversion requires MAF table conversion and tuning after installation. This requirement applies even though the MF103 maintains the stock 103mm internal diameter at the MAF sensor because the conversion changes the LS2 to a probe-style MAF arrangement. Halltech states that the system is intended primarily for installing dealers or experienced enthusiasts with the proper tuning software and calibration knowledge.
Fitment
- 2005 Chevrolet Corvette C6 LS2
- 2006 Chevrolet Corvette C6 LS2
- 2007 Chevrolet Corvette C6 LS2
FAQs
Does the Halltech KBLS2CONV with the MF103 bridge require tuning?
Yes. Although the MF103 retains the same nominal 103mm internal diameter at the MAF sensor as the stock intake, Halltech specifies that the 2005-2007 LS2 conversion package requires MAF table conversion and tuning because it converts the LS2 to a probe-style MAF sensor arrangement.
What is included with this Halltech KBLS2CONV configuration?
This configuration uses the MF103 Black XLPE bridge, S&B Red Oiled Filter, NOMEX sleeve, and a hose for the stock C6 throttle body without a PCV hole. The conversion package also includes a probe-style LS3-style MAF sensor, Halltech H108124 MAF adapter harness, and Halltech Beehive heat shield.
Why Buy Halltech Systems From Beefcake Racing?
Beefcake Racing is your source for Halltech Systems Corvette performance parts, backed by knowledgeable support to help you select the right components for your combination. Whether you are upgrading a street-driven C6 or building a more serious LS2 performance setup, our team can help you match the right Halltech intake configuration to your Corvette. Questions about this Killer Bee MF conversion package or your C6 LS2 setup? Email sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
