Halltech Systems C6 Killer Bee MF Conversion Package - S&B Gray Oiled High Flow TRAK Filter - MF108 Black XLPE - No NOMEX Sleeve - 112mm Throttle Body - PCV Hole in Hose (2005 - 2007 Chevrolet Corvette C6 LS2) - KBLS2CONV
Upgrade your LS2-powered C6 Corvette with the increased airflow capability of the Halltech Systems Killer Bee MF Conversion Package. Engineered specifically for the 2005-2007 Chevrolet Corvette C6 LS2, this configuration combines Halltech's larger MF108 Black XLPE bridge with the S&B Gray Oiled High Flow TRAK Filter and a hose configured for a 112mm throttle body with a PCV hole. With no NOMEX sleeve included, this package is built for enthusiasts looking to move beyond the factory LS2 induction system with a higher-capacity Halltech setup designed for serious performance combinations.
The MF108 bridge features a nominal 108mm internal diameter at the MAF sensor with 9,161 square mm of cross-sectional area, approximately 10 percent more area than the stock intake. The LS2 conversion package also includes the probe-style LS3-style MAF sensor, Halltech H108124 high-density 5-pin-to-GT MAF adapter harness, and Halltech's proprietary Beehive heat shield required for the conversion. Halltech specifies that this system requires MAF table conversion and tuning after installation.
Specifications
- Manufacturer: Halltech Systems
- Part Number: KBLS2CONV
- Product: C6 Killer Bee MF Conversion Package
- Bridge: MF108 Black XLPE
- MF108 Nominal Internal Diameter at MAF Sensor: 108mm
- MF108 Cross-Sectional Area: 9,161 square mm
- MF108 Area Increase: Approximately 10 percent over stock
- Filter: S&B Gray Oiled High Flow TRAK Filter
- Filter Type: Oiled
- NOMEX Sleeve: No
- Throttle Body Size: 112mm
- PCV Hole in Hose: Yes
- MAF Sensor: Probe-style LS3-style MAF sensor
- MAF Adapter Harness: Halltech H108124 high-density 5-pin-to-GT adapter harness
- Heat Shield: Halltech proprietary Beehive heat shield
- MAF Table Conversion: Required
- Tuning: Required
- Application: 2005-2007 Chevrolet Corvette C6 LS2
Features
- Complete Killer Bee MF conversion package engineered for the 2005-2007 Chevrolet Corvette C6 LS2
- MF108 Black XLPE bridge provides approximately 10 percent more cross-sectional area than the stock intake
- 108mm nominal internal diameter at the MAF sensor
- S&B Gray Oiled High Flow TRAK Filter provides Halltech's high-flow oiled filter option
- Configured for a 112mm throttle body
- PCV hole included in the throttle body hose for this specific configuration
- Includes probe-style LS3-style MAF sensor required for the LS2 conversion
- Includes Halltech H108124 high-density 5-pin-to-GT MAF adapter harness
- Includes Halltech's proprietary Beehive heat shield
- Halltech states that the Killer Bee MF LS2 conversion package can provide airflow supporting up to 950 horsepower on a Z06 application
- Halltech tested the LS2 conversion package on its company LS2 for more than 40,000 miles, including drag testing and road racing
- No NOMEX sleeve included with this configuration
- Requires MAF table conversion and proper tuning after installation
Installation and Tuning
The Killer Bee MF LS2 conversion requires proper calibration after installation. Halltech specifies that new MAF tables must be uploaded and the system tuned, with MAF table conversion required for the probe-style MAF arrangement. Halltech considers this package primarily suited to installing dealers or experienced enthusiasts with the correct tuning software and calibration knowledge. Halltech also advises against cutting holes in the radiator shroud to direct additional air toward the filter because doing so can cause lean codes and surging.
Fitment
- 2005 Chevrolet Corvette C6 LS2
- 2006 Chevrolet Corvette C6 LS2
- 2007 Chevrolet Corvette C6 LS2
FAQs
Does the Halltech KBLS2CONV MF108 conversion require tuning?
Yes. Halltech specifies that the Killer Bee MF LS2 conversion requires MAF table conversion and tuning after installation. The MF108 bridge has a nominal 108mm internal diameter at the MAF sensor and approximately 10 percent more cross-sectional area than the stock intake.
What is included with this Halltech KBLS2CONV configuration?
This configuration combines the MF108 Black XLPE bridge with an S&B Gray Oiled High Flow TRAK Filter, no NOMEX sleeve, and a hose configured for a 112mm throttle body with a PCV hole. The conversion package also includes a probe-style LS3-style MAF sensor, Halltech H108124 MAF adapter harness, and Halltech Beehive heat shield.
Why Buy Halltech Systems From Beefcake Racing?
Beefcake Racing is your source for Halltech Systems Corvette performance parts, backed by knowledgeable support to help you select the right components for your combination. Whether you are upgrading a street-driven C6 or building a more serious LS2 performance setup, our team can help you match the right intake configuration to your build. Questions about this Killer Bee MF conversion package, throttle body sizing, or your C6 LS2? Email sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
