Halltech Systems C6 Killer Bee MF Conversion Package - S&B Blue Dry Filter - MF103 Black XLPE - No NOMEX Sleeve - Stock Throttle Body - No PCV Hole in Hose (2005 - 2007 Chevrolet Corvette C6 LS2) - KBLS2CONV
Bring Halltech's Killer Bee MF induction architecture to your 2005-2007 Chevrolet Corvette C6 LS2 with the KBLS2CONV conversion package. This configuration combines the MF103 Black XLPE bridge with an S&B Blue Dry Filter, a probe-style LS3-style MAF sensor, Halltech's H108124 MAF adapter harness, and the proprietary Beehive heat shield. Unlike a simple LS2 intake replacement, the KBLS2CONV converts the earlier C6 to the later probe-style MAF arrangement, giving LS2 owners a complete Halltech induction and MAF conversion package built around the Killer Bee MF platform.
The MF103 bridge features a nominal 103 mm internal diameter at the MAF sensor and 8,332 square mm of cross-sectional area. The S&B Blue Dry Filter provides a dry filtration option without the need for filter oil, while Halltech's Beehive heat shield helps separate the filter and MAF area from hot engine-bay air. This specific package is configured with the MF103 Black XLPE bridge, stock throttle-body setup, no external NOMEX sleeve, and no PCV hole in the throttle-body hose. Because the package changes the LS2 to a probe-style MAF sensor, MAF table conversion and tuning are required.
Specifications
- Manufacturer: Halltech Systems
- Product: C6 Killer Bee MF Conversion Package
- Part Number: KBLS2CONV
- Application: 2005-2007 Chevrolet Corvette C6 LS2
- Bridge Configuration: MF103
- Bridge Material/Finish: Black XLPE
- MAF Internal Diameter: Nominal 103 mm at the MAF sensor
- MAF Cross-Sectional Area: 8,332 square mm
- Filter: S&B Blue Dry Filter
- Filter Type: Dry
- MAF Sensor: Probe-style LS3-style MAF sensor
- MAF Adapter Harness: Halltech H108124 Hi-Density 5-pin-to-GT adapter harness
- Heat Shield: Halltech Beehive heat shield
- External NOMEX Sleeve: No
- Throttle Body Configuration: Stock
- PCV Hose Configuration: No PCV hole in hose
- Tuning Requirement: MAF table conversion and tuning required
- California Emissions Status: No California EO number; not legal for sale in California except for off-road applications such as track racing
Features
- Complete Halltech Killer Bee MF conversion package for the 2005-2007 C6 Corvette LS2
- MF103 Black XLPE intake bridge
- Nominal 103 mm internal diameter at the MAF sensor
- 8,332 square mm of MAF cross-sectional area
- S&B Blue Dry Filter requires no filter oil
- Converts the LS2 application to a probe-style LS3-style MAF sensor
- Includes Halltech H108124 Hi-Density 5-pin-to-GT MAF adapter harness
- Includes Halltech proprietary Beehive heat shield
- Stock throttle-body configuration
- No external NOMEX sleeve in this configuration
- No PCV hole in the throttle-body hose
- Requires MAF table conversion and tuning
- Halltech states stock LS7 Z06 MAF tables can be used as a starting point and may require additional adjustment
- No cutting of the radiator shroud required or recommended
LS2 Probe-Style MAF Conversion
The KBLS2CONV is more than an intake swap. Halltech designed this package to convert the 2005-2007 C6 LS2 to a later probe-style MAF arrangement. The conversion package includes a probe-style LS3-style MAF sensor along with Halltech's H108124 Hi-Density 5-pin-to-GT MAF adapter harness, providing the key hardware needed to integrate the different MAF configuration with the earlier LS2 Corvette.
MAF Table Conversion and Tuning Required
This LS2 conversion package must be tuned. Halltech specifically states that the system requires MAF table conversion after installation and is intended primarily for installing dealers or experienced users with the correct tuning software and knowledge. Halltech states that the stock LS7 Z06 MAF tables can be used as a starting point to get the vehicle running, but the calibration may need additional adjustment for the individual combination. The tuning requirement applies even when the MF103 bridge is selected because the LS2 is being converted to a different probe-style MAF arrangement.
S&B Blue Dry Filter
This KBLS2CONV configuration uses Halltech's S&B Blue Dry Filter option. Because it is a dry filter, it does not require filter oil, making it a straightforward choice for owners who prefer dry filter maintenance while retaining the Halltech Killer Bee MF induction package.
Halltech Beehive Heat Shield
The package includes Halltech's proprietary Beehive heat shield to help isolate the filter and MAF area from hot engine-bay air. Halltech does not recommend cutting additional openings in the radiator shroud in an attempt to increase airflow to the filter, noting that the modification is unnecessary and can cause lean codes and surging.
Fitment
- 2005 Chevrolet Corvette C6 6.0L LS2
- 2006 Chevrolet Corvette C6 6.0L LS2
- 2007 Chevrolet Corvette C6 6.0L LS2
FAQs
Does the Halltech KBLS2CONV require tuning with the MF103 bridge?
Yes. The KBLS2CONV converts the LS2 to a probe-style MAF arrangement, so MAF table conversion and tuning are required. Halltech states that stock LS7 Z06 MAF tables can be used as a starting point, but additional calibration adjustments may be necessary for the individual vehicle and combination.
Does the S&B Blue Dry Filter require filter oil?
No. The S&B Blue Dry Filter is Halltech's dry filtration option for this KBLS2CONV configuration and does not require filter oil. It is paired here with the MF103 Black XLPE bridge, stock throttle-body configuration, no external NOMEX sleeve, and a hose without a PCV hole.
Why Buy Halltech Systems from Beefcake Racing?
Beefcake Racing is your source for Halltech Systems Corvette performance parts, with knowledgeable support to help you select the correct intake, filter, throttle-body configuration, and supporting components for your build. Questions about the Halltech C6 Killer Bee MF Conversion Package or your LS2 Corvette combination? Contact Beefcake Racing at sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
