Halltech Systems C6 Killer Bee MF Conversion Package - S&B Blue Dry Filter - MF108 Black XLPE - No NOMEX Sleeve - 112mm Throttle Body - PCV Hole in Hose (2005 - 2007 Chevrolet Corvette C6 LS2) - KBLS2CONV
Step up the airflow capability of your LS2-powered C6 Corvette with the Halltech Systems Killer Bee MF Conversion Package. Engineered specifically to convert the 2005-2007 Chevrolet Corvette C6 LS2 to Halltech's Killer Bee MF induction platform, this configuration combines the larger MF108 Black XLPE bridge with an S&B Blue Dry Filter and a hose configured for a 112mm throttle body with a PCV hole. With no NOMEX sleeve included, this package delivers the core components needed to move an LS2 Corvette into Halltech's higher-capacity MF intake system.
The Killer Bee MF LS2 conversion replaces the original MAF arrangement with Halltech's probe-style setup and includes the components required to complete the conversion. Halltech supplies the selected MF108 bridge, probe-style LS3-style MAF sensor, H108124 high-density 5-pin-to-GT MAF adapter harness, and proprietary Beehive heat shield. This version adds the S&B Blue Dry Filter for enthusiasts who prefer dry filter media and is configured for a 112mm throttle body with the PCV hole in the hose. Halltech requires MAF table conversion and tuning after installation.
Specifications
- Manufacturer: Halltech Systems
- Part Number: KBLS2CONV
- Product: C6 Killer Bee MF Conversion Package
- Bridge: MF108 Black XLPE
- Filter: S&B Blue Dry Filter
- Filter Type: Dry
- NOMEX Sleeve: No
- Throttle Body Size: 112mm
- PCV Hole in Throttle Body Hose: Yes
- MAF Sensor: Probe-style LS3-style MAF sensor
- MAF Adapter Harness: Halltech H108124 high-density 5-pin-to-GT adapter harness
- Heat Shield: Halltech proprietary Beehive heat shield
- MAF Table Conversion: Required
- Tuning: Required
- California Emissions Status: No CARB EO number for this induction system
- Application: 2005-2007 Chevrolet Corvette C6 LS2
Features
- Complete Killer Bee MF conversion package engineered for the 2005-2007 Chevrolet Corvette C6 LS2
- MF108 Black XLPE bridge selected for this specific configuration
- S&B Blue Dry Filter provides a dry-media alternative to Halltech's oiled filter options
- Configured for a 112mm throttle body
- PCV hole included in the throttle body hose
- Includes probe-style LS3-style MAF sensor required for the LS2 conversion
- Includes Halltech H108124 high-density 5-pin-to-GT MAF adapter harness
- Includes Halltech's proprietary Beehive heat shield
- Halltech states that the Killer Bee MF LS2 conversion package can provide airflow supporting up to 950 horsepower on a Z06 application
- Halltech tested the LS2 conversion package on its company LS2 for more than 40,000 miles along with drag testing and road racing
- No NOMEX sleeve included with this configuration
- Requires MAF table conversion and proper tuning after installation
Installation and Tuning
This Killer Bee MF conversion is not a basic plug-and-play intake swap. Halltech specifies that the system must be tuned after the new MAF tables are uploaded and requires MAF table conversion. Halltech states that the package is intended primarily for installing dealers and is not considered a DIY installation unless the installer has the correct tuning software and knowledge. Halltech also advises against cutting holes in the radiator shroud in an attempt to direct additional air toward the filter because doing so can cause lean codes and surging.
Fitment
- 2005 Chevrolet Corvette C6 LS2
- 2006 Chevrolet Corvette C6 LS2
- 2007 Chevrolet Corvette C6 LS2
FAQs
Does the Halltech KBLS2CONV Killer Bee MF108 conversion require tuning?
Yes. Halltech specifies that this LS2 conversion requires MAF table conversion and tuning after installation. The package converts the original LS2 MAF arrangement to a probe-style LS3-style MAF sensor and includes Halltech's H108124 adapter harness.
What is included with this Halltech KBLS2CONV configuration?
This configuration combines the MF108 Black XLPE bridge with an S&B Blue Dry Filter, no NOMEX sleeve, and a hose configured for a 112mm throttle body with a PCV hole. The conversion package also includes a probe-style LS3-style MAF sensor, Halltech H108124 MAF adapter harness, and Halltech Beehive heat shield.
Why Buy Halltech Systems From Beefcake Racing?
Beefcake Racing is your source for Halltech Systems Corvette performance parts, backed by knowledgeable support to help you select the right components for your combination. Whether you are upgrading a street-driven C6 or putting together a more serious LS2 performance build, our team can help you match the right intake configuration to your setup. Questions about this Killer Bee MF conversion package, throttle body sizing, or your C6 LS2? Email sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
