Halltech Systems C6 Killer Bee MF Conversion Package - S&B Red Oiled Filter - MF108 Black XLPE - No NOMEX Sleeve - 112mm Throttle Body - PCV Hole in Hose (2005 - 2007 Chevrolet Corvette C6 LS2) - KBLS2CONV
Step up the airflow capability of your LS2-powered C6 Corvette with the Halltech Systems Killer Bee MF Conversion Package. Engineered specifically to convert the 2005-2007 Chevrolet Corvette C6 LS2 to Halltech's Killer Bee MF induction platform, this configuration pairs the larger MF108 Black XLPE bridge with an S&B Red Oiled Filter and a hose configured for a 112mm throttle body with a PCV hole. With no NOMEX sleeve included, this package is configured for enthusiasts who want the performance-focused components they need without adding the optional sleeve.
The MF108 bridge measures a nominal 108mm internal diameter at the MAF sensor and provides 9,161 square mm of cross-sectional area, approximately 10 percent more area than the stock intake. The LS2 conversion package includes a probe-style LS3-style MAF sensor, Halltech H108124 high-density 5-pin-to-GT MAF adapter harness, and Halltech's proprietary Beehive heat shield. Halltech requires MAF table conversion and tuning with this system, making it an excellent choice for modified C6 LS2 combinations where increased induction capacity and proper calibration are part of the build.
Specifications
- Manufacturer: Halltech Systems
- Part Number: KBLS2CONV
- Product: C6 Killer Bee MF Conversion Package
- Bridge: MF108 Black XLPE
- MF108 Nominal Internal Diameter at MAF Sensor: 108mm
- MF108 Cross-Sectional Area: 9,161 square mm
- MF108 Area Increase: Approximately 10 percent over stock
- Filter: S&B Red Oiled Filter
- NOMEX Sleeve: No
- Throttle Body Hose Size: 112mm
- PCV Hole in Hose: Yes
- MAF Sensor: Probe-style LS3-style MAF sensor
- MAF Adapter Harness: Halltech H108124 high-density 5-pin-to-GT adapter harness
- Heat Shield: Halltech Beehive heat shield
- Tuning: Required
- MAF Table Conversion: Required
- Application: 2005-2007 Chevrolet Corvette C6 LS2
Features
- Complete Killer Bee MF conversion package for the 2005-2007 Chevrolet Corvette C6 LS2
- MF108 Black XLPE bridge provides increased intake cross-sectional area for performance-oriented combinations
- 108mm nominal internal diameter at the MAF sensor
- Approximately 10 percent greater cross-sectional area than the stock intake
- S&B Red Oiled Filter provides Halltech's oiled filter option for the Killer Bee MF system
- Configured with a hose for a 112mm throttle body
- PCV hole included in the throttle body hose for this specific configuration
- Includes the probe-style MAF sensor required for the LS2 conversion
- Includes Halltech H108124 MAF adapter harness
- Includes Halltech's proprietary Beehive heat shield
- Halltech developed and used the LS2 conversion package on its company LS2 through more than 40,000 miles as well as drag testing and road racing
- No NOMEX sleeve included with this configuration
- Requires MAF table conversion and proper tuning after installation
Installation and Tuning
Halltech specifies that the Killer Bee MF LS2 conversion must be tuned after the new MAF tables are uploaded. MAF table conversion is required because the package replaces the original LS2 MAF arrangement with a probe-style sensor. Halltech notes that the system is primarily intended for installing dealers and experienced enthusiasts who have the proper tuning software and calibration knowledge. Halltech also advises against cutting holes in the radiator shroud to direct additional air toward the filter, as this can cause lean codes and surging.
Fitment
- 2005 Chevrolet Corvette C6 LS2
- 2006 Chevrolet Corvette C6 LS2
- 2007 Chevrolet Corvette C6 LS2
FAQs
Does the Halltech KBLS2CONV MF108 conversion require tuning?
Yes. Halltech requires MAF table conversion and tuning for this LS2 conversion package. The MF108 bridge also increases the MAF cross-sectional area by approximately 10 percent compared with the stock intake, making proper calibration essential.
What configuration is included with this KBLS2CONV package?
This version combines the MF108 Black XLPE bridge with an S&B Red Oiled Filter, no NOMEX sleeve, and a hose configured for a 112mm throttle body with a PCV hole. The LS2 conversion package also includes a probe-style LS3-style MAF sensor, Halltech H108124 MAF adapter harness, and Halltech Beehive heat shield.
Why Buy Halltech Systems From Beefcake Racing?
Beefcake Racing is your source for Halltech Systems Corvette performance parts, with knowledgeable support to help you select the right intake configuration for your combination. Whether you are upgrading the induction system on a street-driven C6 or building a more serious LS2 performance setup, our team can help you match the right components to your build. Questions about this Killer Bee MF conversion package, throttle body sizing, or your Corvette setup? Email sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
