FuelTech EGT-4 CAN 4-Channel Thermocouple Module No Harness (3010017631)
The FuelTech EGT-4 CAN is a 4-channel exhaust gas temperature (EGT) controller and input expansion module designed to communicate with compatible FuelTech ECUs through the CAN bus network. Supporting up to four Type K thermocouples, the EGT-4 CAN allows users to monitor exhaust gas temperatures, cylinder head temperatures, and other temperature readings without occupying the ECU's white input channels.
Compatible with the FuelTech FT450, FT550, FT550LITE, FT600, FT700, and FT700PLUS ECUs, this module expands temperature monitoring and data acquisition capabilities for performance and racing applications.
Four-Channel Type K Thermocouple Monitoring
The EGT-4 CAN accepts signals from up to four Type K thermocouples, including grounded and ungrounded junction configurations. Temperature readings are transmitted directly to the FuelTech ECU through CAN bus communication.
In addition to exhaust gas temperature monitoring, the module can be used with compatible Type K thermocouples to measure cylinder head temperature (CHT), oil temperature, air temperature, water temperature, and other temperature sources.
CAN Bus Input Expansion
By transmitting thermocouple readings through the CAN bus network, the EGT-4 CAN eliminates the need to use up to four of the ECU's white input channels for temperature monitoring.
This frees those ECU inputs for other sensors and functions while expanding the amount of temperature data available for monitoring and data acquisition.
Expandable to 16 Temperature Channels
Up to four EGT-4 CAN modules can be used in a single installation, providing a total of 16 additional Type K thermocouple input channels.
This expandable configuration is useful for applications requiring multiple temperature measurements, including individual cylinder exhaust gas temperature monitoring and other engine temperature data.
Features
- FuelTech EGT-4 CAN 4-channel thermocouple controller module
- Supports up to four Type K thermocouples per module
- Compatible with grounded and ungrounded junction thermocouples
- Transmits temperature readings to the ECU through CAN bus communication
- Functions as a temperature input expansion module
- Frees up to four white ECU input channels for other sensors and functions
- Supports exhaust gas temperature (EGT) monitoring
- Supports cylinder head temperature (CHT) monitoring
- Can monitor oil, air, water, and other temperatures using compatible Type K thermocouples
- Supports up to four EGT-4 CAN modules in one installation
- Provides up to 16 additional temperature input channels with four modules
- Expands engine monitoring and data acquisition capabilities
- Compatible with select FuelTech FT-series ECUs
- No harness included
Fitment
Compatible FuelTech ECUs
- FuelTech FT450
- FuelTech FT550
- FuelTech FT550LITE
- FuelTech FT600
- FuelTech FT700
- FuelTech FT700PLUS
Important Installation Notes
No Harness Included: This is the EGT-4 CAN module without a wiring harness. Required wiring and compatible Type K thermocouples must be sourced separately as needed.
Thermocouple Compatibility: Supports grounded and ungrounded junction Type K thermocouples.
Module Expansion: A maximum of four EGT-4 CAN modules can be used in the same installation, supporting up to 16 temperature input channels.
ECU Compatibility: Designed for CAN bus communication with the listed FuelTech ECUs. Verify system compatibility and wiring requirements before installation.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
