FuelTech 820 lb/hr Low Impedance Fuel Injector O-Ring/-6ORB - 5010109109
High Flow Fueling for Extreme Performance Applications
The FuelTech 820 lb/hr Fuel Injector is built for high horsepower engines that require serious fuel volume and precise delivery. With a flow rate of 5,880 cc/min at 43.5 psi, this injector is designed to support high boost, high RPM setups and proven combinations exceeding 4,000+ horsepower.
This injector features a low impedance (1.5 Ohm) design and requires a Peak & Hold driver, such as the FuelTech 8A/2A or Peak & Hold PRO Injector Driver, ensuring accurate fuel control and stable operation under demanding conditions.
Precision Flow Testing for Accurate Fuel Delivery
Each FuelTech injector is flow tested and calibrated to ensure exceptional linearity, repeatability, and cylinder-to-cylinder consistency. This level of precision is critical for maximizing performance and maintaining engine safety in high-output applications.
- REAL flow tested for consistent performance
- Ensures accurate fueling across all cylinders
- Supports aggressive tuning and high boost setups
- Optimized for ECU-controlled fuel management
Built to Handle All Fuels and Harsh Conditions
Constructed with corrosion-resistant internal components, these injectors are validated through salinization testing to withstand aggressive fuels and harsh operating environments.
- Compatible with gasoline, ethanol, alcohol, nitromethane, nitropropane, MTBE and ETBE
- Corrosion-resistant internals for long-term durability
- EV1 connectors with silver plated terminals for superior conductivity
- Reliable performance in extreme fuel conditions
Reduce Complexity in Your Fuel System
Thanks to its high flow capacity, this injector allows you to reduce the number of injectors, fuel lines, and connections in your setup. This results in a cleaner installation with improved reliability and fewer potential failure points.
- Minimizes fuel system complexity
- Reduces wiring and plumbing requirements
- Compatible with any ECU on the market
- Ideal for motorsports and high-performance builds
Features
- 820 lb/hr (5,880 cc/min @ 43.5 psi) high flow injector
- Low impedance design - 1.5 Ohms
- Requires Peak & Hold driver (8A/2A or PRO)
- REAL flow tested and calibrated
- Compatible with all fuel types including ethanol and nitromethane
- EV1 connector with silver plated terminals
- Corrosion-resistant internal components
- Tested and proven in 4,000+ horsepower applications
- Designed for durability and consistent performance
- FuelTech warranty and support
Quick Specs
- Brand: FuelTech
- Flow Rate: 820 lb/hr (5,880 cc/min @ 43.5 psi)
- Impedance: Low impedance - 1.5 Ohms
- Voltage Limit: Up to 24V
- Connector Type: EV1
- Fitting: O-Ring / -6ORB
- Injector Dimensions: 86 x 32 mm
- Weight: 160g
- Requires: Peak & Hold Driver (8A/2A or PRO)
- Compatibility: All ECUs
- Part Number: 5010109109
Whats Included
- 1 FuelTech 820 lb/hr Fuel Injector
- 1 Manual
FAQs
Do I need a Peak & Hold driver to run this injector?
Yes. This injector is low impedance and requires a Peak & Hold driver such as the FuelTech 8A/2A or Peak & Hold PRO Injector Driver.
What types of fuel can this injector handle?
This injector is compatible with gasoline, ethanol, alcohol, nitromethane, nitropropane, MTBE, and ETBE, making it ideal for both street and race applications.
Why Buy from Beefcake Racing?
Beefcake Racing is your trusted source for FuelTech injectors, fuel system components, and performance electronics. We help builders and racers choose the right parts for reliable, high-performance results.
From street builds to full race applications, our team provides expert support, fast shipping, and real-world experience to help you succeed.
Email: sales@beefcakeracing.com
Phone: 1-855-827-7223
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
