FuelTech Low Impedance Fuel Injector 320 LB/H with O-Ring / -6ORB Fitting - 5010108749
Extreme Flow Injector for High Horsepower Builds
The FuelTech 320 lb/hr Low Impedance Fuel Injector is engineered for extreme performance applications requiring maximum fuel delivery, fast response, and consistent control. Delivering 2,226 cc/min at 43.5 psi, this injector is ideal for high boost, nitrous, and full race builds pushing serious horsepower.
This injector features a low impedance 1.5 Ohm design, requiring a Peak and Hold driver such as the FuelTech 8A/2A or Peak and Hold PRO Injector Driver. This setup enables faster injector response and improved control under extreme fueling demands.
Tested and Proven in 4,000+ Horsepower Applications
Validated in engines exceeding 4,000 horsepower, this injector delivers the fuel volume needed for extreme builds while allowing you to reduce injector count, connections, and overall fuel system complexity.
- Tested and approved for 4,000+ horsepower engines
- Reduces injector count and simplifies fuel system layout
- Minimizes hoses and connections in high-output builds
- Ideal for drag racing and high boost applications
Compatible with All Fuels and Built for Harsh Environments
Designed for durability, this injector features corrosion-resistant internal components validated through salinization testing. Combined with EV1 connectors and silver-plated terminals, it ensures reliable electrical performance across all fuel types.
- Compatible with gasoline, ethanol, alcohol, nitromethane, nitropropane, MTBE, and ETBE
- Silver-plated terminals for superior conductivity
- Corrosion-resistant internals for extended service life
- Designed for harsh racing environments
Optimized for ECU Integration and Output Efficiency
Despite its low impedance design, this injector is compatible with any ECU when paired with the proper Peak and Hold driver. It also allows you to maximize ECU outputs by reducing the number of injectors required in high horsepower builds.
- Requires 8A/2A Peak and Hold or PRO Injector Driver
- Compatible with any ECU on the market
- Helps optimize ECU output usage
- Supports advanced tuning strategies
Features
- 320 lb/hr (2,226 cc/min @ 43.5 psi) high flow fuel injector
- Low impedance 1.5 Ohm design
- Requires Peak and Hold driver for operation
- EV1 connector with silver-plated terminals
- Flow tested and calibrated for accuracy and repeatability
- Corrosion-resistant internal components
- Compatible with all fuel types including ethanol and nitromethane
- Tested in 4,000+ horsepower applications
- Helps reduce injector count and system complexity
- Engineered for durability and long-term performance
Quick Specs
- Brand: FuelTech
- Flow Rate: 320 lb/hr (2,226 cc/min @ 43.5 psi)
- Impedance: Low Impedance (1.5 Ohms)
- Connector Type: EV1
- Voltage Limit: Up to 24V
- Driver Requirement: Peak and Hold Driver Required (8A/2A or PRO)
- Fuel Compatibility: Gasoline, Ethanol, Alcohol, Nitromethane, Nitropropane, MTBE, ETBE
- Injector Dimensions: 86 x 32 mm
- Packing Dimensions: 223 x 162 x 60 mm
- Shipping Dimensions: 225 x 250 x 65 mm
- Weight: 160g
- Fitting: O-Ring / -6ORB
- Quantity: Single Injector
- Warranty: 90 Days
- Part Number: 5010108749
Whats Included
- 1 FuelTech 320 lb/hr Fuel Injector
- 1 Instruction Manual
FAQs
Do I need a peak and hold driver for this injector?
Yes. This is a low impedance injector (1.5 Ohms) and requires a Peak and Hold driver such as the FuelTech 8A/2A or PRO Injector Driver.
Is this injector compatible with E85 and race fuels?
Yes. It is fully compatible with gasoline, ethanol, alcohol, nitromethane, nitropropane, MTBE, and ETBE, making it ideal for extreme performance applications.
Why Buy from Beefcake Racing?
Beefcake Racing is your trusted source for high-performance fuel system components and engine management solutions. We support real-world high horsepower builds and know what it takes to deliver reliable results.
From street builds to 4,000+ horsepower race cars, our team provides expert guidance, fast shipping, and unmatched customer support.
Email: sales@beefcakeracing.com
Phone: 1-855-827-7223
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
