FuelTech Low Impedance Fuel Injector 320 LB/H with O-Ring / -4AN Fitting - 5010108747
Extreme Flow Injector for High Horsepower Applications
The FuelTech 320 lb/hr Low Impedance Fuel Injector is built for extreme horsepower builds where maximum fuel delivery and reliability are non-negotiable. Flowing 2,226 cc/min at 43.5 psi, this injector is designed for high boost, nitrous, and full race applications pushing serious power levels.
Unlike high impedance injectors, this unit features a low impedance 1.5 Ohm design and requires a Peak and Hold driver such as the FuelTech 8A/2A or Peak and Hold PRO Injector Driver. This setup allows for faster response and improved control in high-demand fueling scenarios.
Proven in 4,000+ Horsepower Applications
This injector has been tested and validated in applications exceeding 4,000 horsepower, making it a trusted solution for extreme builds. Its high flow capacity allows you to reduce the number of injectors, connections, and fuel system complexity while still delivering the fuel volume required.
- Tested and approved for 4,000+ horsepower engines
- Reduces injector count and system complexity
- Supports simplified fuel system layouts
- Ideal for drag racing and high boost builds
Compatible with All Fuels and Built for Durability
Designed for maximum durability, this injector features corrosion-resistant internal components validated through salinization testing. Combined with EV1 connectors and silver-plated terminals, it ensures reliable electrical performance even in harsh fuel environments.
- Compatible with gasoline, ethanol, alcohol, nitromethane, nitropropane, MTBE, and ETBE
- Silver-plated terminals for superior conductivity
- Corrosion-resistant internals for extended lifespan
- Designed for harsh racing environments
Flexible Integration with Engine Management Systems
Despite its low impedance design, this injector is compatible with any ECU when paired with the proper Peak and Hold driver. It also allows you to maximize ECU outputs by reducing injector count in high power setups.
- Requires 8A/2A Peak and Hold or PRO Injector Driver
- Compatible with any ECU on the market
- Supports advanced tuning strategies
- Helps optimize ECU output usage
Features
- 320 lb/hr (2,226 cc/min @ 43.5 psi) high flow fuel injector
- Low impedance 1.5 Ohm design
- Requires Peak and Hold driver for operation
- EV1 connector with silver-plated terminals
- Flow tested and calibrated for accuracy and repeatability
- Corrosion-resistant internal components
- Compatible with all fuel types including ethanol and nitromethane
- Tested in 4,000+ horsepower applications
- Helps reduce injector count and system complexity
- Designed for durability and long-term performance
Quick Specs
- Brand: FuelTech
- Flow Rate: 320 lb/hr (2,226 cc/min @ 43.5 psi)
- Impedance: Low Impedance (1.5 Ohms)
- Connector Type: EV1
- Voltage Limit: Up to 24V
- Driver Requirement: Peak and Hold Driver Required (8A/2A or PRO)
- Fuel Compatibility: Gasoline, Ethanol, Alcohol, Nitromethane, Nitropropane, MTBE, ETBE
- Injector Dimensions: 86 x 32 mm
- Packaging Dimensions: 223 x 162 x 60 mm
- Shipping Dimensions: 225 x 250 x 65 mm
- Weight: 160g
- Fitting: O-Ring / -4AN
- Quantity: Single Injector
- Warranty: 90 Days
- Part Number: 5010108747
Whats Included
- 1 FuelTech 320 lb/hr Fuel Injector
- 1 Instruction Manual
FAQs
Do I need a peak and hold driver for this injector?
Yes. This is a low impedance injector (1.5 Ohms) and requires a Peak and Hold driver such as the FuelTech 8A/2A or PRO Injector Driver.
Can this injector be used with E85 or race fuels?
Yes. It is fully compatible with gasoline, ethanol, alcohol, nitromethane, nitropropane, MTBE, and ETBE, making it ideal for extreme performance builds.
Why Buy from Beefcake Racing?
Beefcake Racing is your trusted source for high-performance fuel system components and engine management solutions. We work with real-world high horsepower builds and know what it takes to deliver reliable performance.
From street machines to 4,000+ horsepower race cars, our team provides expert support, fast shipping, and proven results.
Email: sales@beefcakeracing.com
Phone: 1-855-827-7223
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
