Fuel Injector Clinic 2150cc High-Z Fuel Injector Set (ish02-2150h) - Holley Hemi
Feed a serious Holley Hemi performance combination with the massive fuel capacity and precise control of the Fuel Injector Clinic 2150cc High-Z Fuel Injector Set. Part number ish02-2150h includes eight saturated, high-impedance injectors rated at 2150cc/min (200 lbs/hr) at 43.5 PSI and approximately 2500cc/min (240 lbs/hr) at OE 58 PSI fuel pressure. Despite their substantial flow capacity, these injectors deliver excellent linearity and repeatable short pulse width operation, giving tuners the control needed for predictable calibration and strong drivability in demanding high-output applications.
Fuel Injector Clinic precisely flow matches each injector set to within 1%. Every injector is individually numbered, and its results are documented on the detailed flow sheet included with the set. FIC flow tests and rates its high-performance injectors at 43.5 PSI (3 Bar) and 90 degrees F fuel temperature using CF-16B calibration fluid. Superior short pulse width control and tight manufacturing tolerances help make the ish02-2150h predictable to tune while delivering the fuel volume required by serious Holley Hemi combinations.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: ish02-2150h
- Application: Holley Hemi
- Injector Quantity: 8
- Injector Type: Saturated / High Impedance (High-Z)
- Flow Rate at 43.5 PSI: 2150cc/min (200 lbs/hr)
- Flow Rate at OE 58 PSI: 2500cc/min (240 lbs/hr)
- Test Pressure: 43.5 PSI (3 Bar)
- Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Flow Matching: Precisely matched to within 1%
- Injector Identification: Individually numbered
- Flow Documentation: Detailed injector flow sheet included
- Solder-In Pigtails: PGTDEN8
- EV1 Plug-and-Play Adaptor: PADPDtoJ8
- EV6 Plug-and-Play Adaptor: PADPDtoU8
- Multec II Plug-and-Play Adaptor: PADPDtoGM8
- O-Rings: Required application-specific O-rings included
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Eight 2150cc/min high-performance fuel injectors for Holley Hemi applications
- Flows 200 lbs/hr at 43.5 PSI fuel pressure
- Flows approximately 2500cc/min, or 240 lbs/hr, at OE 58 PSI fuel pressure
- Saturated, high-impedance High-Z injector design
- Massive flow capacity for demanding high-output fuel systems
- Excellent linearity for consistent and predictable fuel delivery
- Superior short pulse width control and repeatability
- Precisely flow matched to within 1%
- Each injector is individually numbered with results supplied on a detailed flow sheet
- Flow tested at 43.5 PSI and 90 degrees F using CF-16B calibration fluid
- Tight manufacturing tolerances support predictable tuning and strong drivability
- Brand-new, unused injectors rather than remanufactured or core-program injectors
- Multiple connector options available for different wiring harness configurations
- Required O-rings included for the intended application configuration
- Backed by Fuel Injector Clinic's lifetime warranty against manufacturing defects
Injector Plug and Wiring Options
The ish02-2150h is currently available with multiple connection options for different wiring harness configurations. The solder-in configuration uses PGTDEN8 pigtails. Plug-and-play adaptor options include PADPDtoJ8 for EV1 connections, PADPDtoU8 for EV6 connections, and PADPDtoGM8 for Multec II connections. Selecting the appropriate configuration allows the injector connection to be matched to the requirements of your specific wiring harness.
Fuel Injector Clinic supplies brand-new, unused injectors for its performance applications rather than relying on remanufactured or core-program injectors. For aftermarket fuel systems, custom installations, or other non-standard setups, contact Beefcake Racing before ordering to confirm the correct injector and connector configuration for your combination.
Fitment
- Holley Dodge Hemi EFI intake manifold applications
FAQs
How much does the Fuel Injector Clinic ish02-2150h flow at 43.5 PSI and 58 PSI?
The ish02-2150h is rated at 2150cc/min, or 200 lbs/hr, at 43.5 PSI (3 Bar). At OE 58 PSI (4 Bar) fuel pressure, the injectors flow approximately 2500cc/min, or 240 lbs/hr.
What wiring options are available for the ish02-2150h?
Fuel Injector Clinic currently offers PGTDEN8 solder-in pigtails, PADPDtoJ8 plug-and-play adaptors for EV1 connections, PADPDtoU8 adaptors for EV6 connections, and PADPDtoGM8 adaptors for Multec II connections. Confirm the connector required by your specific wiring harness before ordering.
Order Your Fuel Injector Clinic Injectors from Beefcake Racing
When your Holley Hemi combination requires 2150cc injectors, correct injector sizing and connector configuration are critical to getting the fuel system right. Beefcake Racing can help you confirm that the Fuel Injector Clinic ish02-2150h is properly configured for your combination before you order. For product questions or help selecting the correct injectors, email sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
